Essentia FS is a feature rich digital radiography room solution with a space saving design. The standard configuration includes a generator, floor mounted tube stand, chest stand and table. The system features an advanced user-friendly 10″ touchscreen for streamlined controls at the patient side.

Essentia FS is a feature rich digital radiography room solution with a space saving design. The standard configuration includes a generator, floor mounted tube stand, chest stand and table. The system features an advanced user-friendly 10″ touchscreen for streamlined controls at the patient side. The graphic interface displays tube angulation, SID, automated tube tracking and more. Complimented with a range of advanced safety and workflow features, Essentia FS is a high performance x-ray system with unparalleled price-performance ratio.

Floor Mounted Tube Stand:
10” Intuitive Touchscreen
Preset source to image distance (SID) with Auto Tube Tracking.
Manual Movement Vertical/longitudinal traved controlled by electric magnet brake
Tube rotation : ±135°
Tube head telescopic extension: ±4.7 in. (±12 cm)
Column rotation : ±90°
Travel Range Vertical (Tube) : 58.7 in. (149 cm)
Longitudinal (Column) : 100 in. (254 cm)
Power Requirement 24 VDC, 3 A

Real time display of SID and tube angulation.
Controls for exam parameters at the patient side, ease patient comfort and technologist workflow.

Premium Wall Stand
Light, easy positioning with motorized, counter balanced controls and electromagnetic locks.
Convenient hand grips optimize safe and steady patient positioning.
The stand’s rotating bucky tray accommodates a 14×17″ detector.
Bucky tray can be adapted to accommodate a 17×17″ detector during service installation.
Manual Movement Vertical travel with electromagnetic brake
Vertical travel Range Max : 74 in. (188 cm)
(central beam-floor) Min : 15.7 in. (40cm)
Power Requirement 24 VDC, 1 A

Motorized Elevating Table Specifications.
• Patient Weight Capacity: 550 lbs.
• Wireless foot switch controls

Tabletop Dimensions 90 x 32 in.
Tabletop Travel Range Left & Right : ±33.5 in. | Forward & Back : ±7 in.
Up & down : ±10 in. | tabletop height : min. 21.5 in. ~ max. 31.5 in.
Detector Travel Range Left & Right 19.5 in.
Power Requirement 120~240 VAC, 50/60Hz, 500 VA

Configurations:
• System sold as a complete radiographic suite with chest stand, table, generator and tube stand configurations

• 14×17″ rotating bucky trays in both table and upright. 17×17″ bucky tray adapter can be installed at initial installation
• Automatic motorized tube tracking to table and upright detector height
• Generators with 3-point Control Console:
• 40 kW single-phase, 230 VAC, 500 mA
• 50 kW 3-phase, 230 VAC, 630 mA
• 50 kW 3-phase, 480 VAC, 630 mA
• 65 kW 3-phase, 480 VAC, 800 mA
• X-ray Tubes with 200 kHu tube (w/40 or 50 kW gen) focal spot 300 kHu tube (w/ 40, 50 or 65 kW gen)
• Manual collimator
• Right or left opening non-tilting wall stand
• Table top detector holder for cross table exams (option)
• Single or multiple flat panel detector workflow (option)

The post Fuji FDR Essentia FS Digital Radiography Suite appeared first on Auxo Medical.

FDR Clinica X is a scalable digital x-ray suite for hospital radiology and outpatient imaging departments of all sizes–providing affordability and versatility without compromise. Step up your imaging to deliver Fujifilm’s innovative image processing and high sensitivity image acquisition technologies to your patient exams. FDR Clinica X is scalable to meet any department’s budgetary and workflow requirements. The system and its generator controls are fully integrated with Fujifilm’s FDX Console PLUS technologist workstation and lightweight, durable and dose efficient FDR D- EVO II, III and FDR ES detectors.

Ceiling Suspended Tube Stand System Configuration
With easy articulation and rotating display, the tube extends as much as 63 in. from ceiling. Optional automated tube height tracking, collimation and centering with the height of the upright or table, eliminates workflow steps to speed exams. Allows the technologist to
focus on the patient.

Chest Stand with Automatic Tilting
Automatic and manual tilting upright bucky stands are optionally available. Simplifying positioning for technologists and improving exam comfort for seated patients or patients in wheelchairs.

Elevating Patient Table
Motorized elevating, 4-way floating top table with a heavy-duty weight limit of 661 lbs. (300 kg) 86.6(W)x31.9(L)x1.8(H) inch top with flat edges, +/-20 ̋ Longitudinal & +/-5 ̋ Lateral travel. ̃22-33 ̋

FDR Clinica X Floor Stand Suit
Full featured solutions for tight spaces, lower room preparation costs and limited building power requirements.

The post Fuji FDR Clinica X Radiology Suites appeared first on Auxo Medical.

800052026 FDR D-EVO III G80i Panel Only

Articulating Cart Pictured not included, see further below for additional pricing.

Fujifilm’s latest generation ultra-lightweight, wireless long length detector features a 17×32” field of view and weighs just 12 lbs. FDR D-EVO III G80i brings added portability for spine and leg surgery uses, along with traditional upright and supine long length exams. FDR D-EVO III G80i’s light and thin design is ideal for trauma imaging in the ER and spine, leg and other surgical procedures. It can be used pre-, intra-, and post- surgery for precise verification of planning, measurements, hardware alignments, angles, counts and more. Its wireless connectivity to the console eliminates cords for safer, easier workflow in tight, sterile OR and ER environments. Its Hydro AG protective antibacterial coating provides added safety in infection controls and sterile field uses.

Features and Specs:

• 17×32″ instant images available anywhere you need them
• Long length DR with enhanced portability for conventional weight bearing exams along with added flexibility for room to room, supine, surgical and trauma imaging
• Full length views in a single, instant exposure with one seamless length detector
• No stitching alignment or motion retakes
• Faster acquisition of long-view images
• Fewer exposures lower patient exposure to radiation
• At just 12 lbs G80i is the world’s lightest long length DR detector. Ultra-light positioning and cord-free design makes it easy to move from room to room.
• Smooth, sealed design protects circuitry from body fluids and disinfection wipe downs.
• Fujifilm’s proprietary Hydro Ag antibacterial coating effectively prevents 99.99%** bacterial growth on the detector’s surfaces, enhancing infection controls and helping prevent HAIs
• Choice of stands provide optimal positioning for weight bearing upright, supine, cross table, table-top and even under the surgery table
• Model name:
  Flat Panel Detector (DR-ID 1836SE)
  for FDR D-EVO III System (DR-ID 1800)
• Type:
  Cassette type detector with ISS
  (Irradiation Side Sampling)
  and glass-based TFT detector
• Scintillator:
  GOS (Gadolinium oxysulfide)
• Detector external size:
  850 × 460 × 15mm (Approx.)
  [33.4″ × 18.1″ × 0.6″]
• Weight:
  Approx. 5.2kg (excludes battery pack)
• Pixel pitch/Pixels:
  Pixel size 150µm/5,376 × 2,832pixels
• Detector Area:
  31.8” x 16.7” (Pixel matrix size 5376 x 2832 pixels)
• Field of View:
  16.7″×31.8″
• Wireless standard:
  IEEE 802.11n, IEEE 802.11ac
  (2.4GHz, W52/W53/W56/W58)
• Image preview:
  Less than 2.5sec (wired/wireless)
• Cycle time:
  Less than 7.5sec (wired/wireless)
  Less than 10sec (SmartSwitch)
• Battery recharging time:
  Approx. 3hours (with battery charger)

Options/Add Ons:

• Add FDX Console
• Add FDR Flex w/ Laptop
• 800052053 FDR D-EVO III G80i Articulating Cart
• 800052260 Mobile Detector Holder for G80i
• 800052051 FDR D-EVO III G80i Weight Bearing Cap
• 800052052 FDR D-EVO III G80i Grid

The post Fuji FDR D-EVO III G80i 17×32 in Full Spine Detector Panel Only appeared first on Auxo Medical.

800046893 FDR D-EVO GL with Rolling Stand

Fuji FDR D-EVO GL long-view single exposure detector ensures consistent, easy patient positioning and repeatable image acquisition, reducing exam discomfort for a better patient experience. FDR D-EVO GL’s single exposure DR, when used with Virtual Grid software, can reduce dose as much as 50% compared to grid exams.

The Fuji FDR D-EVO-GL is 17×49 inches, expanding the traditional 14 inch CR long length field of view by 3 full inches to better accommodate a variety of patient sizes and help prevent retakes due to anatomy cut off.

The Fuji FDR D-EVO-GL enhances the workflow of long-view radiography by capturing the entire image in a single exposure in just a few seconds, reducing the chance for patient motion-induced artifacts and time for the patient to remain still.

Features:

Refined Dynamic Visualization image processing produces exceptional images
FDR D-EVO GL utilizes the latest Fujifilm digital image processing technology, including Dynamic Visualization, which optimizes image display based on recognition of contrast levels throughout the entire exposure field. The resulting first-up images have outstanding detail and greater window and leveling capability in PACS.

Intelligent Virtual Grid image processing for situations where grid use can be challenging
Virtual Grid intelligent image processing replaces the use of a grid to enhance contrast and improve clarity while reducing dose as much as 50% compared to exams performed with a grid.

Patented ISS capture technology promotes high sensitivity
Fujifilm’s proprietary Irradiated Side Sampling (ISS) positions its capture electronics (TFTs) at the irradiation side, in contrast to traditional detectors. This design significantly suppresses scattering and attenuation of X-ray signals, improving efficiency to produce sharper images at lower doses compared to traditional designs.

Noise reduction circuitry improves sensitivity in high absorption regions
A unique, Fujifilm innovation in noise reduction circuitry maximizes signal strength to improve image quality in high absorption areas. This enhancement achieves 1.7 times the DQE of previous models, with as little as 0.03mrad dose. Visibility of dense areas such as the heart and mediastinum is greatly improved.

SmartSwitch Technology
Fujifilm’s SmartSwitch technology enables automatic x-ray detection. FDR D-EVO GL automatically senses exposures to trigger image capture, allowing easier, faster interfacing with any x-ray system

Specs:

• Detector external size: 52.7 x 22.3 x 2.0 in.
• Weight: Approx. 43.0 lbs.
• Pixel pitch Pixels: 150 μm
• Image preview: 8228 x 2832 pixels: 17 x 49 in. size reading: 9-20 sec., 17 x 17 in. size reading (single detector segment): 6 sec.
• Cycle time: 17 x 49 in. size reading: 26 sec., 17 x 17 in. size reading (single detector segment): 10 sec.

Options/Add Ons:

• 800047463 FDR D-EVO GL Weight Bearing Cap
• 800053594 FDR D-EVO GL Grid 8-1 103 Rev. A (for fixed and articulating stands)
• 800053698 FDR D-EVO GL Grid for Mobile Stand 8-1 103 LPI A
• 800048016 Rolling Workstation Cart
• 800048577 MP Holder for FDR D-EVO GL Articulating Stand
• 16515734 FDR D-EVO GL SE Cable 20M
• 16515722 FDR D-EVO GL SE Cable 10M
• 16663103 FDR D-EVO GL SE Cable 4M
• 800048580 25’ 125V Hospital Grade Power Cord
• 800046494 FDR D-EVO GL Rolling Stand

The post Fuji FDR D-EVO GL 17×49 in Full Spine Length Detector With Rolling Stand appeared first on Auxo Medical.

Features:

Fujifilm’s lightest DR detector with flexible film-based TFT circuitry
By replacing the glass-based TFT layer with a high-tech thin film layer, FDR D-EVO III is 40% lighter than the original 1st generation FDR D-EVO model and 20% lighter than FDR D-EVO II.

Higher DQE 33% (1Lp/mm-RQA5 1mR)
Innovative film-based capture layer helps reduce signal blur, providing excellent DQE and dose performance.

Enhanced durability to endure tough medical environments
By eliminating the most fragile (glass) component, the new flexible film-based TFT detector improves durability and decreases risks of shock damage compared to previous FDR D-EVO models.

Patented ISS capture technology promotes high sensitivity
Equipped with Fujifilm’s patented Irradiated Side Sampling (ISS) technology which bonds its capture electronics (TFTs) to the x-ray irradiation side, in contrast to traditional detectors. This design suppresses scattering and attenuation of x-ray signals, to produce sharper images at lower doses compared to traditional designs.

Unique formulation of large and small phosphor particles at a optimal ratios, enhances x-ray absorption
Increased x-ray absorption is achieved through our uniquely formulated scintillator layer, which employs photographic film technology to optimize the blending ratio of phosphor particles to minimize blur and enhance sharpness.

Fujifilm’s noise reduction circuitry improves detector sensitivity in high absorption and low dose images
Uniquely engineered noise reduction circuitry reduces noise in the image to improve signal strength. This results in 33% DQE even at 0.1mR. The granularity and visibility of dense, low penetration or ultra low dose regions are improved.

Improved handling
Simple battery replacement workflow
The battery can easily be replaced with one hand and the detector can be back up and ready in ~90 seconds. This eliminates concerns about battery life or on-demand battery swaps even in the midst of critical care.

Suitable for outdoor use with an expanded spectrum
Supports 2.4GHz and 5GHz (W52/53/56/58)* spectrum. Suitable for outdoor use during disaster response.

Memory Mode
Dedicated memory mode enables added emergency uses. Built-in memory stores up to 100 images. Images are retained even if detector power is interrupted. Digital readout on detector face tracks images stored and increments as they are acquired.

Flexibility – On-Demand Use
FDR D-EVO III’s unique combination of form and function brings significant value to traditional room retrofit and mobile uses. The additional capabilities of Memory Mode and Smart Switch bring added value for emergency, on-demand backup and failsafe uses with any portable, room or even for remote off-site and disaster response uses.

Advanced image processing
Virtual Grid: High quality images without a physical grid
Advanced processing simulates scatter clean up without a physical grid, correcting for the effects of scatter radiation while retaining contrast and sharpness. Eliminating the grid improves patient comfort, simplifies positioning and allows as much as 50% lower dose compared to grid exams. Grid cutoff and retakes associated with misalignment of X-ray tube and grid are also prevented.

Dynamic Visualization II: Intelligent feature recognition technology optimizes image quality
Advanced algorithms optimize contrast and density based on anatomic definition, hardware and thickness characteristics, resulting in outstanding detail and greater window and leveling capability in PACS.

Specs:

• Type: Detector with patented ISS (Irradiation Side Sampling) and flexible film-based TFT detector technology
• Scintillator: GOS (Gadolinium oxysulfide)
• Detector external size: 18 x 18 x 0.6″ approx. (460 x 460 x 15mm)
• Weight: 4.6 lbs. (2.1 kg) excludes battery
• Pixel pitch: 150μm, 16 bits per pixel
• Pixels: 2836 x 2336 pixels
• Image preview: Less than 2 sec
• Cycle time: Less than 10 sec (wired), Less than 11 sec (SmartSwitch)
• Battery recharging time: Approx. 3 hours (with battery charger), Approx. 4 hours (with Docking Stand)

ADDITIONAL Configurations:
ADD FDX
ADD Docking Stand
ADD Power Box

FDR D-EVO III Accessories
16648725 FDR D-EVO III Battery (standard)
16648737 FDR D-EVO III Battery Charger Upgrade Kit
800049194 FDR D-EVO III Battery Charger Kit
800051782 FDR D-EVO III 25×30 weight bearing cap

The post FDR D-EVO III G43 17 x 17” Detector Panel Only appeared first on Auxo Medical.

Features:

Fujifilm’s lightest DR detector with flexible film-based TFT circuitry
By replacing the glass-based TFT layer with a high-tech thin film layer, FDR D-EVO III is 40% lighter than the original 1st generation FDR D-EVO model and 20% lighter than FDR D-EVO II.

Higher DQE 33% (1Lp/mm-RQA5 1mR)
Innovative film-based capture layer helps reduce signal blur, providing excellent DQE and dose performance.

Enhanced durability to endure tough medical environments
By eliminating the most fragile (glass) component, the new flexible film-based TFT detector improves durability and decreases risks of shock damage compared to previous FDR D-EVO models.

Patented ISS capture technology promotes high sensitivity
Equipped with Fujifilm’s patented Irradiated Side Sampling (ISS) technology which bonds its capture electronics (TFTs) to the x-ray irradiation side, in contrast to traditional detectors. This design suppresses scattering and attenuation of x-ray signals, to produce sharper images at lower doses compared to traditional designs.

Unique formulation of large and small phosphor particles at a optimal ratios, enhances x-ray absorption
Increased x-ray absorption is achieved through our uniquely formulated scintillator layer, which employs photographic film technology to optimize the blending ratio of phosphor particles to minimize blur and enhance sharpness.

Fujifilm’s noise reduction circuitry improves detector sensitivity in high absorption and low dose images
Uniquely engineered noise reduction circuitry reduces noise in the image to improve signal strength. This results in 33% DQE even at 0.1mR. The granularity and visibility of dense, low penetration or ultra low dose regions are improved.

Improved handling
Simple battery replacement workflow
The battery can easily be replaced with one hand and the detector can be back up and ready in ~90 seconds. This eliminates concerns about battery life or on-demand battery swaps even in the midst of critical care.

Suitable for outdoor use with an expanded spectrum
Supports 2.4GHz and 5GHz (W52/53/56/58)* spectrum. Suitable for outdoor use during disaster response.

Memory Mode
Dedicated memory mode enables added emergency uses. Built-in memory stores up to 100 images. Images are retained even if detector power is interrupted. Digital readout on detector face tracks images stored and increments as they are acquired.

Flexibility – On-Demand Use
FDR D-EVO III’s unique combination of form and function brings significant value to traditional room retrofit and mobile uses. The additional capabilities of Memory Mode and Smart Switch bring added value for emergency, on-demand backup and failsafe uses with any portable, room or even for remote off-site and disaster response uses.

Advanced image processing
Virtual Grid: High quality images without a physical grid
Advanced processing simulates scatter clean up without a physical grid, correcting for the effects of scatter radiation while retaining contrast and sharpness. Eliminating the grid improves patient comfort, simplifies positioning and allows as much as 50% lower dose compared to grid exams. Grid cutoff and retakes associated with misalignment of X-ray tube and grid are also prevented.

Dynamic Visualization II: Intelligent feature recognition technology optimizes image quality
Advanced algorithms optimize contrast and density based on anatomic definition, hardware and thickness characteristics, resulting in outstanding detail and greater window and leveling capability in PACS.

Specs:

• Type: Detector with patented ISS (Irradiation Side Sampling) and flexible film-based TFT detector technology
• Scintillator: GOS (Gadolinium oxysulfide)
• Detector external size: 18 x15 x 0.6″ approx., (460˜ x 384˜ x 15mm)
• Weight: 4 lbs. (1.8 kg) excludes battery
• Pixel pitch: 150μm, 16 bits per pixel
• Pixels: 2836 x 2336 pixels
• Image preview: Less than 2 sec
• Cycle time: Less than 9 sec (wired), Less than 10 sec (SmartSwitch)
• Battery recharging time: Approx. 3 hours (with battery charger), Approx. 4 hours (with Docking Stand)

ADDITIONAL Configurations:
ADD FDX
ADD Docking Stand
ADD Power Box

FDR D-EVO III Accessories:
16648725 FDR D-EVO III Battery (standard)
16648737 FDR D-EVO III Battery Charger Upgrade Kit
800049194 FDR D-EVO III Battery Charger Kit
800051782 FDR D-EVO III 25×30 weight bearing cap

The post FDR D-EVO III G35 14 x 17” Detector Panel Only appeared first on Auxo Medical.

Fujifilm’s VXR System is a compact veterinary x-ray system designed for ease of installation, even in small spaces, and ease of use to generate the brilliant images at low dose expected from Fujifilm.

The VXR System is dedicated to combining affordability and efficiency without sacrificing performance. Staff and patients benefit from quick, convenient workflow, low dose requirements, and automated, optimized image visualization.

The Bucky accommodates any new or existing standard sized 14×17” or 17×17” cassette or detector.
The four-way floating tabletop is available in various lengths and adds positioning flexibility without disrupting the patient.
A tabletop urine trap safeguards exam room cleanliness and cleanup efficiency.
Anatomical selections add convenience to workflow and populate user-programmable techniques for Fujifilm’s dose efficient technologies

Fujifilm detectors leverage Fujifilm’s patented ISS technology, capturing clearer images at lower dose than conventional DR detectors.
ISS Capture technology promotes high sensitivity in Fujifilm DR detectors by positioning their electronics (TFTs) at the irradiation sides. This significantly suppresses scattering and attenuation of x-ray signals, improving efficiency to produce sharper images at lower dose compared to traditional designs.

Contribute to a safe work environment for your staff with advanced low dose detector and image processing technologies.
Advanced image processing offers multiple ways to optimize images while contributing to ALARA dose initiatives. Standard Dynamic Visualization provides exceptional first-up images with outstanding detail throughout the entire field of view.

32 kW or capacitor assisted 32 kW generator can be used with standard electrical infrastructure.
Generator hardware is installed inside the table.

Radiographic Table
Tabletop: 59”(W) x 28.19”(D) x 1.75”(H)
Longitudinal: 20.86” (±10.43”)
Transverse: 4.48” (±2.24”)
Removable grid: 10:1, 103 lpi, 100 cm focus
SID: 100 cm (Urine trap included)

Touchscreen
Anatomical selections populate user-programmable techniques.
The all-in-one workstation features a 19” touchscreen mounted on an articulating arm at eye-level for simplified visibility and ease of reach. Complete exams efficiently, with intuitive touch interface and instant image previews.

Power Supply
32 kW (220-240 V) or capacitor assisted (100-120 V) (Add $1800.00)
Single phase
Max output: 400 mA@80 kV, 320 mA@100 kV,
250 mA@125 kV
Timer: 0.001 to 10 sec., 38 steps
mAs: 0.1 to 320, capacitor assisted 0.1 to 10
Touch Control console on tube head
4-point display (kV, mA, Time, mAs)
4 m power cable

Temperature: 10 °C to 40°C (50 °F to 104 °F)
Humidity: 30% to 75%, non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa
Bucky: 17×17” standard

FDR ES II 17×17 or 14×17 also needs to be purchased, detector is not included.

The post Fuji VXR Veterinary X-Ray Room appeared first on Auxo Medical.

Features:

• Smooth maneuverability allows you to go anywhere with this ultra-compact system. At just 198 lbs., the FDR AQRO is 80% lighter than traditional mobile x-ray systems.
• Four swiveling wheel casters allow precise, easy positioning and travel in any direction, and the ability to spin the system in place in tight spaces.
• Easy positioning changes enable sequential exposures of the chest and abdomen to be acquired quickly and easily for efficient technologist workflow.
• The articulating control panel allows rotation, tilting and height adjustment for instant image confirmation from any angle.
• The small lightweight design and extended reach of the tube head allows one-hand operation for easy exam positioning.
• High-performance Li-ion battery power enables up to 12 hours of continuous use at 20 exposures/hour, 15-minute quick charge for 1 hour (20 exposures) and rapid 4-hour charging for full charge. FDR AQRO can also be used while plugged into AC power.
• The detector holder area features built-in charging and initialization, a keyed lock to safely stow your valuable detector and a tilting design for detector bagging.
• Primary surfaces are coated with Fujifilm’s exclusive Hydro AG antibacterial coating, providing an added safety measure in infection controls.
• Virtual Grid™ (included standard) image processing simulates grid use for improved image quality for images acquired without a grid, and lower dose acquisition compared to grid exams.
• Dynamic Visualization™ II (included standard), our latest image processing, adjusts image quality throughout the entire exposure field based on intelligent feature and thickness recognition.
• Compatible with FDR D-EVO III, II and FDR ES CsI wireless detectors in standard 14×17,” full field-of-view 17×17,” and our unique 24x30cm size, all featuring Fujifilm’s patented ISS technology and noise reduction circuitry for exceptional image quality and performance at lower dose.The FDR

AQRO incorporates FDR D-EVO III, II or FDR ES CSI detectors which feature Fujifilm’s patented Irradiated Side Sampling (ISS) technology for higher resolution images and improved dose efficiency. ISS increases sharpness and DQE by reducing scatter and blur. Fujifilm’s revolutionary innovation positions its capture electronics at the tops of the crystals where data is strongest and sharpest, yielding exceptional detail and image quality at lower doses.

FDR AQRO’s onboard technologist console includes Fujifilm’s latest Dynamic Visualization II image processing upgrade, which automatically recognizes thickness and density characteristics to adapt the optimum image processing parameters throughout the entire exposure field, producing exceptional images with higher detail and contrast levels, and providing improved window and leveling capability for diagnosis in PACS.

FDR AQRO Functionalities
The onboard, full-featured technologist console provides immediate image previews, dose tracking and exposure and deviation index features, in addition to a host of image manipulation and workflow tools. A double-click magnification feature gives technologists the ability to zoom full screen and toggle edge enhancement to better view PICC lines and detect patient movement. Count on fast, reliable wireless worklist updates and transmission to PACS.

Virtual Grid:
Processing intelligently simulates grid use, eliminating scatter effect, to improve contrast and clarity and reduce dose by as much as 50% and reduce dose by as much as 50% for images acquired without a grid. Useful in portable exams: simplifies acquisition and positioning, and eliminates artifacts associated with physical grid misalignment and improper SID.

Intuitively recognizes scatter effect in the image
Precisely tunes contrast and noise control
Eliminates repeats caused from misalignment factors associated with physical grids
Customizable grid characteristics, grid lines, density and interspacing material
Can be applied to all body parts,* including chest, abdomen, head, spine, pelvis, upper and lower extremities.

Shown in this product includes FDR ES 24C or 14C – D-EVO III C24 – 24x30cm CsI Detector or G35 – 14×17″ GOS Detector.

For Larger Detectors Add below:
D-EVO III C24 – 24x30cm CsI Detector
D-EVO III C25 – 24x30cm CsI Detector
D-EVO III C35 – 14×17″ CsI Detector

Additional Options:
800045168 FDR AQRO Remote Image Display
16534871 FDR AQRO High Handle Kit
16534912 FDR AQRO Bluetooth Barcode Scanner
16534857 FDR AQRO Filter
16534895 FDR AQRO Accessory Storage Compartment (1 standard)
16621210 FDR AQRO FDR ES DS Adapter
16534936 FDR AQRO Wet Tissue Holder
16534950 FDR AQRO Lead Apron Hanger (replacement)
800047934 FDR AQRO 24×30 Side Bin
800047843 FDR AQRO Graphic Decal – Jungle
800048268 FDR AQRO Graphic Decal – Narwhal
800048350 FDR AQRO Graphic Decal – Candy Adventure

The post Fuji FDR AQRO Portable X-ray with FDR ES 24/14C appeared first on Auxo Medical.

No Panel Included. Ask about Flex Lite Systems with Panel options:

• ES-C35
• ES-G35
• D-EVO III – C35
• D-EVO III – G35

The FDR-flex mobile kit brings high quality digital imaging to any clinical setting and easily turns an analog system into a DR solution in seconds. It is great for use in hospitals, clinics and remote medical environments. FDR-flex can also serve as reliable backup.

Completely portable: so compact and lightweight it can be hand-carried by one technologist. The FDR-flex mobile kit is compact enough to be carried to patients anywhere in the hospital who need exams, and flexible enough to turn any analog X-ray system into a complete DR solution instantly. No wired connection to the x-ray system is needed!

Compatible with our latest lightweight and durable FDR D-EVO III & II detectors
Completely wireless, battery powered
Automatically senses x-ray exposure
Fast and easy to use: image previews display in just 1-2 seconds, significantly minimizing wait time for the patient and increasing workflow efficiency for the technologist
Enhanced function of the FDX Console with an easy customizable user interface
Fujifilm’s advanced imaging technologies, patented ISS, Dynamic Visualization and Virtual Grid™ (option) are engineered for exceptional image quality and gentle dose.
FDR D-EVO III & II detectors feature Fujifim’s Hydro AG antibacterial coating to assist with infection controls. FDR D-EVO III offers ultra-lightweight with its revolutionary glass-free design for higher durability and imaging performance.

Additional Options:
800019435 FDX Console GPR Software
800046386 FDR-flex Flat Mounting Kit

The post Fuji FDR-flex Lite Digital DR Solution (no panel) appeared first on Auxo Medical.

FDR Go PLUS Overview

Sophisticated yet simple operation and Fujifilm’s trademark image quality and dose performance help optimize workflow and minimize patient disturbance.

FDR Go PLUS is one of the smallest, quietest, and most agile full-size portables available. Its quiet, smooth operation, retractable column, and compact design make it ideal for navigating busy environments and tight spaces. Together with Fujifilm’s trademark image quality and dose performance, FDR Go PLUS offers exactly what you need for your most challenging bedside exams.

Designed with safety in mind
Built for speed and efficiency, the FDR Go PLUS incorporates features to ensure the safety of users and patients. A touch-sensing bumper stops the system and sounds an alarm if an obstacle comes too close. The quick release brake system stops the FDR Go PLUS whenever the grip handle is released, and a special safety mode allows it to travel at a slower speed for in-room or training uses.

FDR Go PLUS’s onboard technologist console uses Dynamic Visualization™ image processing, which automatically recognizes the region of interest and applies the optimum image processing parameters throughout the entire exposure field, producing exceptional images with higher detail and contrast levels, and providing improved window and leveling capability for diagnosis in PACS.

The FDR Go PLUS with FDR D-EVO III & II detectors feature Fujifilm’s exclusive Hydro AG antibacterial coating and patented Irradiated Side Sampling (ISS) for higher resolution images and improved dose efficiency vs conventional circuitry design. ISS increases sharpness and DQE by reducing scatter and blur. Revolutionary innovation positions its capture electronics at the patient side of the capture layers where data is strongest and sharpest, yielding exceptional detail and image quality at lower doses. FDR D-EVO III offers ultra-lightweight with its revolutionary glass-free design for higher durability and imaging performance.

Features:

• Retractable tube column, ultra-low park position, and signature compact tube head for maximum visibility and agile maneuverability while traveling.
• System status indicators with bright LED status lights on the monitor and tube arm to provide exposure, charge, and system status at a glance.
• Extra-large touchscreen display with Dynamic Visualization™ image processing, which automatically optimizes images for greater diagnostic visibility.
• Virtual Grid™ (option) image processing simulates grid use, eliminating the need for a grid. It provides excellent image quality, up to 50% lower dose than grid exams, lighter easier positioning, and optimal patient comfort.
• Extensive dedicated storage areas for large and small items, including a covered storage compartment for smaller items and larger open slots for easy accessibility and cleaning.
• Inching controls at the tube head slowly move the system forward or backward for precise positioning at the bedside without needing to return to the drive handle.
• 3 sets of easy-to-reach tube positioning releases and front and rear collimation controls for fast, easy collimation and positioning exactly where you need it.
• Fun pediatric graphics (option) to help calm patients and parents in the NICU, PICU, and pediatric departments.
• Compatible with FDR D-EVO III and FDR D-EVO II detectors available in GOS and CsI with antibacterial coating, in standard 14×17”, 17×17”, 10×12″ sizes, and a 24x30cm perfect for neonatal and extremity use, all featuring Fujifilm’s patented ISS technology for exceptional image quality at low dose.
• System battery power lasts 3-4 hours and features emergency reserve mode for additional exposures and travel after low battery warning.
• Browser based RIS and PACS shortcut buttons let you close studies remotely from the mobile console.

Shown in this product includes FDR D-EVO III C24 – 24x30cm CsI Detector or G35 – 14×17″ GOS Detector.

For Larger Detectors Add below:
C35 – 14×17″ CsI Detector
C43 – 17×17″ CsI Detector
G43 – 17×17″ GOS Detector

Additional Options:
800047670 FDR Go Plus Remote Controller Kit
16581018 FDR Go Plus Additional Handswitch Option
16581056 FDR Go Plus DVI-D External Monitor Connection
800047875 FDR Go Plus Wireless Barcode Reader Kit
800047635 FDR Go Plus DAP Meter Option Kit
800050358 FDR Go PLUS Omnikey RFID Option
800047704 FDR Go PLUS Graphic Decal – Sea
800048238 FDR Go PLUS Graphic Decal – Narwhal
800048347 FDR Go PLUS Graphic Decal – Candy Adventure

The post Fuji FDR Go PLUS with FDR D-EVO III appeared first on Auxo Medical.