Mark your calendar! This Spring, Auxo Medical will be offering a Steris Sterilizer and Washer/Disinfector service training course!

The course will be offered October 25th – 29th 2021 at Auxo Medical in Richmond, VA.

October 25th-29th 2021 – Steris Small Stage 3 Series Sterilizers for 2 days (3013, 3023, & Gravity units)

Cost per candidate:  $3500.00*** what is the cost?

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high-quality training.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  

Payment for each candidate will be required by  October 11, 2021 for each candidate.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Stage 3 Sterilizer Series;
• Operate the Amsco® Stage 3 steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Stage 3 steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Stage 3 steam sterilizers into a service mode;
• Properly clean the Amsco® Stage 3 steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each
  of the Steris Operator, Maintenance, Service, and Parts manuals.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the 444 series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the 444 series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the 444 series washer/disinfectors into service mode;
• Clean the 444 series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos.

Interested in a training class? Fill out the form below or contact usto register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Training Course appeared first on Auxo Medical.

Mark your calendar! This Spring, Auxo Medical will be offering a Steris Sterilizer and Washer/Disinfector service training course!

The course will be offered June 14th – 18th 2021 at Auxo Medical in Richmond, VA.

June 14th – 18th 2021 – Steris Small Stage 3 Series Sterilizers for 2 days (3013, 3023, & Gravity units)

Cost per candidate:  $3500.00*** what is the cost?

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high-quality training.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  

Payment for each candidate will be required by  June 7, 2021 for each candidate.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Stage 3 Sterilizer Series;
• Operate the Amsco® Stage 3 steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Stage 3 steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Stage 3 steam sterilizers into a service mode;
• Properly clean the Amsco® Stage 3 steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each
  of the Steris Operator, Maintenance, Service, and Parts manuals.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the 444 series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the 444 series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the 444 series washer/disinfectors into service mode;
• Clean the 444 series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos.

Interested in a training class? Fill out the form below or contact us to register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Service Training Course – June 14th – 18th appeared first on Auxo Medical.

The course will be offered March 22nd – 26th 2021 at Auxo Medical in Richmond, VA.

March 22nd – 26th 2021 – Steris Small Stage 3 Series Sterilizers for 2 days (3013, 3023, & Gravity units)

Cost per candidate:  $3500.00*** what is the cost?

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high-quality training.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  

Payment for each candidate will be required by  March 17th, 2021 for each candidate.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Stage 3 Sterilizer Series;
• Operate the Amsco® Stage 3 steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Stage 3 steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Stage 3 steam sterilizers into a service mode;
• Properly clean the Amsco® Stage 3 steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each
  of the Steris Operator, Maintenance, Service, and Parts manuals.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the 444 series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the 444 series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the 444 series washer/disinfectors into service mode;
• Clean the 444 series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos.

Interested in a training class? Fill out the form below or contact us to register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Service Training Course – March 22nd – 26th appeared first on Auxo Medical.

Mark your calendar! This Fall, Auxo Medical will be offering a Steris Sterilizer and Washer/Disinfector service training course!

The course will be offered October 26th – 30th 2020 at Auxo Medical in Richmond, VA.

October 26th – 30th 2020 – Steris Small Stage 3 Series Sterilizers for 2 days (3013, 3023, & Gravity units)

Cost per candidate:  $3500.00*** what is the cost?

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high quality training.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  

Payment for each candidate will be required by  October 16th, 2020 for each candidate.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Stage 3 Sterilizer Series;
• Operate the Amsco® Stage 3 steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Stage 3 steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Stage 3 steam sterilizers into a service mode;
• Properly clean the Amsco® Stage 3 steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each
  of the Steris Operator, Maintenance, Service, and Parts manuals.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the 444 series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the 444 series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the 444 series washer/disinfectors into service mode;
• Clean the 444 series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos.

Interested in a training class? Fill out the form below or contact us to register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Service Training Course – October 26th – 30th appeared first on Auxo Medical.

The course will be offered March 23rd – 27th 2020 at Auxo Medical in Richmond, VA.

March 23rd – 24th 2020 – Steris Small Stage 3 Series Sterilizers for 2 days (3013, 3023, & Gravity units)
March 25th – 26th 2020 – Steris 444 Washer Disinfectors
March 27th – Review/Water Chemistry LLC discussion on importance of water quality for the final half day.

Cost per candidate:  $3500.00***

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high quality training.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  

Payment for each candidate will be required by  March 13th, 2020 for each candidate.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Stage 3 Sterilizer Series;
• Operate the Amsco® Stage 3 steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Stage 3 steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Stage 3 steam sterilizers into a service mode;
• Properly clean the Amsco® Stage 3 steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each
  of the Steris Operator, Maintenance, Service, and Parts manuals.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the 444 series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the 444 series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the 444 series washer/disinfectors into service mode;
• Clean the 444 series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos.

Interested in a training class? Fill out the form below or contact us to register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Service Training Course – March 23rd – 27th appeared first on Auxo Medical.

The course will be offered September 30th – October 4th 2019 at Auxo Medical in Richmond, VA.

September 30th – October 1st 2019  – Steris Small Stage 3 Series Sterilizers for 2 days (3013, 3023, & Gravity units)
October 2nd – 3rd 2019  – Steris 444 Washer Disinfectors
October 4th, 2019 – Review/Water Chemistry LLC discussion on importance of water quality for the final half day.

Cost per candidate:  $3500.00***

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high quality training.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  

Payment for each candidate will be required by  September 23rd, 2019 for each candidate.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Stage 3 Sterilizer Series;
• Operate the Amsco® Stage 3 steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Stage 3 steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Stage 3 steam sterilizers into a service mode;
• Properly clean the Amsco® Stage 3 steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each
  of the Steris Operator, Maintenance, Service, and Parts manuals.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the 444 series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the 444 series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the 444 series washer/disinfectors into service mode;
• Clean the 444 series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos.

Interested in a training class? Fill out the form below or contact us to register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Service Training Course – September 30th – October 4th appeared first on Auxo Medical.

The course will be offered May 20th – 24th, 2019 at Auxo Medical in Richmond, VA.

May 20th – 21st 2019 –Steris Century Small or Medium Series Sterilizers for 2 days (V116, V120, V138, V148, V160 & Gravity units)

May 22nd – 23rd 2019 – Steris Synergy Washer Disinfectors

May 24th, 2019– Review .

Cost per candidate:  $3000.00***

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high-quality training.

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Steris Century Small or Medium Sterilizer Series;
• Operate the Steris Century Small or Medium steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Steris Century Small or Medium steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Steris Century Small or Medium steam sterilizers into a service mode;
• Properly clean the Steris Century Small or Medium steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each
  of the Steris Operator, Maintenance, Service, and Parts manuals.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Steris Synergy series washer/disinfectors;
• Operate the Steris Synergy series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the Steris Synergy series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the Steris Synergy series washer/disinfectors into service mode;
• Clean the Steris Synergy series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  

Payment for each candidate will be required by May 13th, 2019 for each candidate.

*** All breakfasts, lunches, and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

Interested in a training class? Fill out the form below or contact us to register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Training Course – May 20th – 24th, 2019 appeared first on Auxo Medical.

Mark your calendar! This Fall, Auxo Medical will be offering a Steris Sterilizer and Washer/Disinfector service training course!

The course will be offered November 5th – 9th, 2018 at Auxo Medical in Richmond, VA.

November 5th – 6th 2018  – Steris Small Stage 3 Series Sterilizers for 2 days (3013, 3023, & Gravity units)
November  7th – 8th 2018  – Steris 444 Washer Disinfectors
November  9th, 2018 – Review/Water Chemistry LLC discussion on importance of water quality for the final half day.

Cost per candidate:  $3000.00***

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high quality training.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  

Payment for each candidate will be required by October 19th 2018 for each candidate.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Stage 3 Sterilizer Series;
• Operate the Amsco® Stage 3 steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Stage 3 steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Stage 3 steam sterilizers into a service mode;
• Properly clean the Amsco® Stage 3 steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each
  of the Steris Operator, Maintenance, Service, and Parts manuals.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the 444 series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the 444 series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the 444 series washer/disinfectors into service mode;
• Clean the 444 series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos.

Interested in a training class? Fill out the form below or contact us to register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Training Course – November 5th – 9th, 2018 appeared first on Auxo Medical.

Mark your calendar! This Fall, Auxo Medical will be offering a Steris Sterilizer and Washer/Disinfector service training course!

The course will be offered October 16th – 20th, 2017 at Auxo Medical in Richmond, VA.

October 16th – 17th 2017  – Steris  Small Century Series Sterilizers
October  18th – 19th 2017  – Steris Synegry Washers
October  20th, 2017 – Review for the final half day.

Cost per candidate:  $3000.00***

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high quality training.

To Enroll, send a Purchase Order to Auxo Medical LLC with the names and phone numbers of each candidate that will participate.  Payment for each candidate will be required by September 29th 2017.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Century Sterilizer Series;
• Operate the Amsco® Century steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Century steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Century steam sterilizers into a service mode;
• Properly clean the Amsco® Century steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos as well as a copy of the Steris Century Series In-service Video.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the Synergy series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the Synergy series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the Synergy series washer/disinfectors into service mode;
• Clean the Synergy series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.
  

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos as well as a copy of the Steris Synergy Series In-service Video.

At the end of the Reimers Boiler Instructional, the student will be able to:

• Properly fire and shutdown an electric Steam Generator;
• Properly find all boiler National Board information and required build data sheets;
• Understand the process of electric steam generation;
• Trace and identify all components of a typical steam generator used with Sterilization equipment.

Interested in a training class? Fill out the form below or contact us to register!

Training Class

Enroll in the Class

First Name *

Last Name *

Phone Number *

Email Address

Add Remove

Attach Purchase Order *

Drop a file here or click to upload Choose File

Maximum file size: 104.86MB

reCAPTCHA

If you are human, leave this field blank.

Δ

The post Training Course – October 16th – 20th, 2017 appeared first on Auxo Medical.

Mark your calendar! This Spring, Auxo Medical will be offering a Steris Sterilizer and Washer/Disinfector service training course!

The course will be offered  March 13th – 17th, 2017 at Auxo Medical in Richmond, VA.

March 13th – 14th 2017  – Steris Century Series Sterilizers
March 15th – 16th 2017  – Steris 444 Washers
March 17th, 2017 – Review for the final half day.

Cost per candidate:  $3000.00***

Each attendee will receive a certificate of training from Auxo Medical LLC at the end of the course.  This certificate has been widely recognized by Healthcare companies and large equipment service companies across the country as evidence of high quality training.

*** All breakfasts, lunches and snacks provided by Auxo.  Lodging and after hours meals will not be provided and each attendee is required to have their own method of transportation. ***

At the end of the Sterilizer course, the student will be able to:

• Verify proper installation of the Amsco® Century Sterilizer Series;
• Operate the Amsco® Century steam sterilizers;
• Locate the preventive maintenance schedule and learn how to use it to perform OEM recommended preventive maintenance on the Amsco® Century steam sterilizers.
• Perform basic troubleshooting and adjustments;
• Put the Amsco® Century steam sterilizers into a service mode;
• Properly clean the Amsco® Century steam sterilizers;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos as well as a copy of the Steris Century Series In-service Video.

At the end of the Washer Disinfector course, the student will be able to:

• Verify proper installation of the Reliance® series washer/disinfectors;
• Operate the 444 series washer/disinfectors;
• Locate the preventive maintenance schedule and learn how to use it to perform basic preventive maintenance on the 444 series washer/disinfectors;
• Perform basic troubleshooting and adjustments;
• Put the 444 series washer/disinfectors into service mode;
• Clean the 444 series washer/disinfectors;
• Access the STERIS service websites for assistance;
• Access and locate all necessary parts, maintenance, and troubleshooting information in each of the Steris Operator, Maintenance, Service, and Parts manuals.
  

Each Student will receive a hard copy or electronic copy of each of the manuals above as well as the Auxo assembled Training manual complete with detailed information and photos as well as a copy of the Steris 444 Series In-service Video.

The post Training Course – March 13th – 17th, 2017 appeared first on Auxo Medical.