800052026 FDR D-EVO III G80i Panel Only

Articulating Cart Pictured not included, see further below for additional pricing.

Fujifilm’s latest generation ultra-lightweight, wireless long length detector features a 17×32” field of view and weighs just 12 lbs. FDR D-EVO III G80i brings added portability for spine and leg surgery uses, along with traditional upright and supine long length exams. FDR D-EVO III G80i’s light and thin design is ideal for trauma imaging in the ER and spine, leg and other surgical procedures. It can be used pre-, intra-, and post- surgery for precise verification of planning, measurements, hardware alignments, angles, counts and more. Its wireless connectivity to the console eliminates cords for safer, easier workflow in tight, sterile OR and ER environments. Its Hydro AG protective antibacterial coating provides added safety in infection controls and sterile field uses.

Features and Specs:

• 17×32″ instant images available anywhere you need them
• Long length DR with enhanced portability for conventional weight bearing exams along with added flexibility for room to room, supine, surgical and trauma imaging
• Full length views in a single, instant exposure with one seamless length detector
• No stitching alignment or motion retakes
• Faster acquisition of long-view images
• Fewer exposures lower patient exposure to radiation
• At just 12 lbs G80i is the world’s lightest long length DR detector. Ultra-light positioning and cord-free design makes it easy to move from room to room.
• Smooth, sealed design protects circuitry from body fluids and disinfection wipe downs.
• Fujifilm’s proprietary Hydro Ag antibacterial coating effectively prevents 99.99%** bacterial growth on the detector’s surfaces, enhancing infection controls and helping prevent HAIs
• Choice of stands provide optimal positioning for weight bearing upright, supine, cross table, table-top and even under the surgery table
• Model name:
  Flat Panel Detector (DR-ID 1836SE)
  for FDR D-EVO III System (DR-ID 1800)
• Type:
  Cassette type detector with ISS
  (Irradiation Side Sampling)
  and glass-based TFT detector
• Scintillator:
  GOS (Gadolinium oxysulfide)
• Detector external size:
  850 × 460 × 15mm (Approx.)
  [33.4″ × 18.1″ × 0.6″]
• Weight:
  Approx. 5.2kg (excludes battery pack)
• Pixel pitch/Pixels:
  Pixel size 150µm/5,376 × 2,832pixels
• Detector Area:
  31.8” x 16.7” (Pixel matrix size 5376 x 2832 pixels)
• Field of View:
  16.7″×31.8″
• Wireless standard:
  IEEE 802.11n, IEEE 802.11ac
  (2.4GHz, W52/W53/W56/W58)
• Image preview:
  Less than 2.5sec (wired/wireless)
• Cycle time:
  Less than 7.5sec (wired/wireless)
  Less than 10sec (SmartSwitch)
• Battery recharging time:
  Approx. 3hours (with battery charger)

Options/Add Ons:

• Add FDX Console
• Add FDR Flex w/ Laptop
• 800052053 FDR D-EVO III G80i Articulating Cart
• 800052260 Mobile Detector Holder for G80i
• 800052051 FDR D-EVO III G80i Weight Bearing Cap
• 800052052 FDR D-EVO III G80i Grid

The post Fuji FDR D-EVO III G80i 17×32 in Full Spine Detector Panel Only appeared first on Auxo Medical.

800046893 FDR D-EVO GL with Rolling Stand

Fuji FDR D-EVO GL long-view single exposure detector ensures consistent, easy patient positioning and repeatable image acquisition, reducing exam discomfort for a better patient experience. FDR D-EVO GL’s single exposure DR, when used with Virtual Grid software, can reduce dose as much as 50% compared to grid exams.

The Fuji FDR D-EVO-GL is 17×49 inches, expanding the traditional 14 inch CR long length field of view by 3 full inches to better accommodate a variety of patient sizes and help prevent retakes due to anatomy cut off.

The Fuji FDR D-EVO-GL enhances the workflow of long-view radiography by capturing the entire image in a single exposure in just a few seconds, reducing the chance for patient motion-induced artifacts and time for the patient to remain still.

Features:

Refined Dynamic Visualization image processing produces exceptional images
FDR D-EVO GL utilizes the latest Fujifilm digital image processing technology, including Dynamic Visualization, which optimizes image display based on recognition of contrast levels throughout the entire exposure field. The resulting first-up images have outstanding detail and greater window and leveling capability in PACS.

Intelligent Virtual Grid image processing for situations where grid use can be challenging
Virtual Grid intelligent image processing replaces the use of a grid to enhance contrast and improve clarity while reducing dose as much as 50% compared to exams performed with a grid.

Patented ISS capture technology promotes high sensitivity
Fujifilm’s proprietary Irradiated Side Sampling (ISS) positions its capture electronics (TFTs) at the irradiation side, in contrast to traditional detectors. This design significantly suppresses scattering and attenuation of X-ray signals, improving efficiency to produce sharper images at lower doses compared to traditional designs.

Noise reduction circuitry improves sensitivity in high absorption regions
A unique, Fujifilm innovation in noise reduction circuitry maximizes signal strength to improve image quality in high absorption areas. This enhancement achieves 1.7 times the DQE of previous models, with as little as 0.03mrad dose. Visibility of dense areas such as the heart and mediastinum is greatly improved.

SmartSwitch Technology
Fujifilm’s SmartSwitch technology enables automatic x-ray detection. FDR D-EVO GL automatically senses exposures to trigger image capture, allowing easier, faster interfacing with any x-ray system

Specs:

• Detector external size: 52.7 x 22.3 x 2.0 in.
• Weight: Approx. 43.0 lbs.
• Pixel pitch Pixels: 150 μm
• Image preview: 8228 x 2832 pixels: 17 x 49 in. size reading: 9-20 sec., 17 x 17 in. size reading (single detector segment): 6 sec.
• Cycle time: 17 x 49 in. size reading: 26 sec., 17 x 17 in. size reading (single detector segment): 10 sec.

Options/Add Ons:

• 800047463 FDR D-EVO GL Weight Bearing Cap
• 800053594 FDR D-EVO GL Grid 8-1 103 Rev. A (for fixed and articulating stands)
• 800053698 FDR D-EVO GL Grid for Mobile Stand 8-1 103 LPI A
• 800048016 Rolling Workstation Cart
• 800048577 MP Holder for FDR D-EVO GL Articulating Stand
• 16515734 FDR D-EVO GL SE Cable 20M
• 16515722 FDR D-EVO GL SE Cable 10M
• 16663103 FDR D-EVO GL SE Cable 4M
• 800048580 25’ 125V Hospital Grade Power Cord
• 800046494 FDR D-EVO GL Rolling Stand

The post Fuji FDR D-EVO GL 17×49 in Full Spine Length Detector With Rolling Stand appeared first on Auxo Medical.

Features:

Fujifilm’s lightest DR detector with flexible film-based TFT circuitry
By replacing the glass-based TFT layer with a high-tech thin film layer, FDR D-EVO III is 40% lighter than the original 1st generation FDR D-EVO model and 20% lighter than FDR D-EVO II.

Higher DQE 33% (1Lp/mm-RQA5 1mR)
Innovative film-based capture layer helps reduce signal blur, providing excellent DQE and dose performance.

Enhanced durability to endure tough medical environments
By eliminating the most fragile (glass) component, the new flexible film-based TFT detector improves durability and decreases risks of shock damage compared to previous FDR D-EVO models.

Patented ISS capture technology promotes high sensitivity
Equipped with Fujifilm’s patented Irradiated Side Sampling (ISS) technology which bonds its capture electronics (TFTs) to the x-ray irradiation side, in contrast to traditional detectors. This design suppresses scattering and attenuation of x-ray signals, to produce sharper images at lower doses compared to traditional designs.

Unique formulation of large and small phosphor particles at a optimal ratios, enhances x-ray absorption
Increased x-ray absorption is achieved through our uniquely formulated scintillator layer, which employs photographic film technology to optimize the blending ratio of phosphor particles to minimize blur and enhance sharpness.

Fujifilm’s noise reduction circuitry improves detector sensitivity in high absorption and low dose images
Uniquely engineered noise reduction circuitry reduces noise in the image to improve signal strength. This results in 33% DQE even at 0.1mR. The granularity and visibility of dense, low penetration or ultra low dose regions are improved.

Improved handling
Simple battery replacement workflow
The battery can easily be replaced with one hand and the detector can be back up and ready in ~90 seconds. This eliminates concerns about battery life or on-demand battery swaps even in the midst of critical care.

Suitable for outdoor use with an expanded spectrum
Supports 2.4GHz and 5GHz (W52/53/56/58)* spectrum. Suitable for outdoor use during disaster response.

Memory Mode
Dedicated memory mode enables added emergency uses. Built-in memory stores up to 100 images. Images are retained even if detector power is interrupted. Digital readout on detector face tracks images stored and increments as they are acquired.

Flexibility – On-Demand Use
FDR D-EVO III’s unique combination of form and function brings significant value to traditional room retrofit and mobile uses. The additional capabilities of Memory Mode and Smart Switch bring added value for emergency, on-demand backup and failsafe uses with any portable, room or even for remote off-site and disaster response uses.

Advanced image processing
Virtual Grid: High quality images without a physical grid
Advanced processing simulates scatter clean up without a physical grid, correcting for the effects of scatter radiation while retaining contrast and sharpness. Eliminating the grid improves patient comfort, simplifies positioning and allows as much as 50% lower dose compared to grid exams. Grid cutoff and retakes associated with misalignment of X-ray tube and grid are also prevented.

Dynamic Visualization II: Intelligent feature recognition technology optimizes image quality
Advanced algorithms optimize contrast and density based on anatomic definition, hardware and thickness characteristics, resulting in outstanding detail and greater window and leveling capability in PACS.

Specs:

• Type: Detector with patented ISS (Irradiation Side Sampling) and flexible film-based TFT detector technology
• Scintillator: GOS (Gadolinium oxysulfide)
• Detector external size: 18 x 18 x 0.6″ approx. (460 x 460 x 15mm)
• Weight: 4.6 lbs. (2.1 kg) excludes battery
• Pixel pitch: 150μm, 16 bits per pixel
• Pixels: 2836 x 2336 pixels
• Image preview: Less than 2 sec
• Cycle time: Less than 10 sec (wired), Less than 11 sec (SmartSwitch)
• Battery recharging time: Approx. 3 hours (with battery charger), Approx. 4 hours (with Docking Stand)

ADDITIONAL Configurations:
ADD FDX
ADD Docking Stand
ADD Power Box

FDR D-EVO III Accessories
16648725 FDR D-EVO III Battery (standard)
16648737 FDR D-EVO III Battery Charger Upgrade Kit
800049194 FDR D-EVO III Battery Charger Kit
800051782 FDR D-EVO III 25×30 weight bearing cap

The post FDR D-EVO III G43 17 x 17” Detector Panel Only appeared first on Auxo Medical.

Features:

Fujifilm’s lightest DR detector with flexible film-based TFT circuitry
By replacing the glass-based TFT layer with a high-tech thin film layer, FDR D-EVO III is 40% lighter than the original 1st generation FDR D-EVO model and 20% lighter than FDR D-EVO II.

Higher DQE 33% (1Lp/mm-RQA5 1mR)
Innovative film-based capture layer helps reduce signal blur, providing excellent DQE and dose performance.

Enhanced durability to endure tough medical environments
By eliminating the most fragile (glass) component, the new flexible film-based TFT detector improves durability and decreases risks of shock damage compared to previous FDR D-EVO models.

Patented ISS capture technology promotes high sensitivity
Equipped with Fujifilm’s patented Irradiated Side Sampling (ISS) technology which bonds its capture electronics (TFTs) to the x-ray irradiation side, in contrast to traditional detectors. This design suppresses scattering and attenuation of x-ray signals, to produce sharper images at lower doses compared to traditional designs.

Unique formulation of large and small phosphor particles at a optimal ratios, enhances x-ray absorption
Increased x-ray absorption is achieved through our uniquely formulated scintillator layer, which employs photographic film technology to optimize the blending ratio of phosphor particles to minimize blur and enhance sharpness.

Fujifilm’s noise reduction circuitry improves detector sensitivity in high absorption and low dose images
Uniquely engineered noise reduction circuitry reduces noise in the image to improve signal strength. This results in 33% DQE even at 0.1mR. The granularity and visibility of dense, low penetration or ultra low dose regions are improved.

Improved handling
Simple battery replacement workflow
The battery can easily be replaced with one hand and the detector can be back up and ready in ~90 seconds. This eliminates concerns about battery life or on-demand battery swaps even in the midst of critical care.

Suitable for outdoor use with an expanded spectrum
Supports 2.4GHz and 5GHz (W52/53/56/58)* spectrum. Suitable for outdoor use during disaster response.

Memory Mode
Dedicated memory mode enables added emergency uses. Built-in memory stores up to 100 images. Images are retained even if detector power is interrupted. Digital readout on detector face tracks images stored and increments as they are acquired.

Flexibility – On-Demand Use
FDR D-EVO III’s unique combination of form and function brings significant value to traditional room retrofit and mobile uses. The additional capabilities of Memory Mode and Smart Switch bring added value for emergency, on-demand backup and failsafe uses with any portable, room or even for remote off-site and disaster response uses.

Advanced image processing
Virtual Grid: High quality images without a physical grid
Advanced processing simulates scatter clean up without a physical grid, correcting for the effects of scatter radiation while retaining contrast and sharpness. Eliminating the grid improves patient comfort, simplifies positioning and allows as much as 50% lower dose compared to grid exams. Grid cutoff and retakes associated with misalignment of X-ray tube and grid are also prevented.

Dynamic Visualization II: Intelligent feature recognition technology optimizes image quality
Advanced algorithms optimize contrast and density based on anatomic definition, hardware and thickness characteristics, resulting in outstanding detail and greater window and leveling capability in PACS.

Specs:

• Type: Detector with patented ISS (Irradiation Side Sampling) and flexible film-based TFT detector technology
• Scintillator: GOS (Gadolinium oxysulfide)
• Detector external size: 18 x15 x 0.6″ approx., (460˜ x 384˜ x 15mm)
• Weight: 4 lbs. (1.8 kg) excludes battery
• Pixel pitch: 150μm, 16 bits per pixel
• Pixels: 2836 x 2336 pixels
• Image preview: Less than 2 sec
• Cycle time: Less than 9 sec (wired), Less than 10 sec (SmartSwitch)
• Battery recharging time: Approx. 3 hours (with battery charger), Approx. 4 hours (with Docking Stand)

ADDITIONAL Configurations:
ADD FDX
ADD Docking Stand
ADD Power Box

FDR D-EVO III Accessories:
16648725 FDR D-EVO III Battery (standard)
16648737 FDR D-EVO III Battery Charger Upgrade Kit
800049194 FDR D-EVO III Battery Charger Kit
800051782 FDR D-EVO III 25×30 weight bearing cap

The post FDR D-EVO III G35 14 x 17” Detector Panel Only appeared first on Auxo Medical.

FDR ES detectors are the next generation of DR retrofit solutions designed with the essential conveniences of Fujifilm image acquisition and design. Light, portable, affordable detectors can optimize your x-ray room for table and free positioning and table top exams with top-of-the-line image quality. There’s also no need to re-work your existing equipment because FDR ES fits existing standard Buckys and holders for simple DR and DR panel retrofits. FDR ES detectors feature 150 micron pixel pitch and a wide 16-bit dynamic range, as well as Fujifilm’s ISS (Irradiated Side Sampling) which provides ultra-sharp imaging with advanced dose efficiency. This exclusive design captures the x-ray image from the incident/patient side of the detector, in contrast to traditional designs which capture the image below the scintillator layer. The result is a reduction in the distance for light to spread, allowing the image to be captured where it’s sharper and stronger as it was always intended.

As a world-leading imaging and information company, Fujifilm is dedicated both to improving image quality and advancing dose lowering technologies and safe healthcare standards for patients. FDR ES is a perfect example. It features engineering innovations which achieve dose efficiency improvements by as much as 30% compared to Fujifilm CR and as much as 20% over comparable DR detector designs, all while delivering exceptional images.

Rounded edges make FDR ES easy to pick up off flat surfaces.
Carbon fiber casings make FDR ES detectors durable and lightweight, with 14×17” weighing only 6.4 lbs.
Sleep mode extends battery life for less frequent battery changes.
Built to protect against incidental sprayed liquid (IPX-3 rating).
Fujifilm detector innovations improve image quality and dose efficiency through advanced processing combined with patented ISS technology and improved circuitry performance.

Model FDR ES C35
Size 14×17
External (inches) 15 x 18 x 0.59
Connection Tethered
Scintillator Csl
Weight (lbs.) 6.4
Pixel Matrix 2836 x 2836
Pixel Pitch 150µ
Cycle Time (sec.) Less than 10.5
Image Display (sec.) 1-2

Add ons or upgrades:
800047618 FDR ES Wireless Capability
800047085 Silex Wireless Access Point
16445006 Fujifilm AP
800045992 USB Cable Kit
800045736 FDR ES Charger Kit
800047201 Additional Power Box
16441426 FDR D-EVO II / FDR ES SE Cable 10m
16441452 FDR D-EVO II / FDR ES SE Cable 20m
800047218 FDR D-EVO II / FDR ES Power Box & Wireless base room
800042278 24×30 Weight Bearing Cap
800020589 14×17 Weight Bearing Cap
800020590 17×17 Weight Bearing Cap
800017801 FDR ES, D-EVO Protector Cap 14×17 Long Dim. Handle
800021582 FDR ES, D-EVO Protector Cap 17×17 with Handle
800042500 FDR ES, D-EVO Protector Cap 14×17 Short Dim. Handle
800047086 SE Cable Clamp
800046834 Universal Tabletop Cassette Holder
800046444 Lateral Detector Holder
800049009 Mobile Holder for DR Detector
800049761 Mobile Trans-Former for FDR D-EVO Detectors
800020589 14×17 Weight Bearing Stand
800020590 17×17 Weight Bearing Stand
800050717 Fixed Height Mobile Table With Clear Top
800050941 Clear Advantage Mobile Stand
800051079 Mobile Shield With Step
800050942 Two Step Platform
800051191 Footstool, Two Step
800051599 Footstool, Single Step
800018075 18×20 2mil Poly Zip Bag Zip Bag
800011829 UPS, Power Conditioner & Surge Protector

The post Fuji ES 14C Detector with Battery, Tethered appeared first on Auxo Medical.

FDR ES detectors are the next generation of DR retrofit solutions designed with the essential conveniences of Fujifilm image acquisition and design. Light, portable, affordable detectors can optimize your x-ray room for table and free positioning and table top exams with top-of-the-line image quality. There’s also no need to re-work your existing equipment because FDR ES fits existing standard Buckys and holders for simple DR and DR panel retrofits. FDR ES detectors feature 150 micron pixel pitch and a wide 16-bit dynamic range, as well as Fujifilm’s ISS (Irradiated Side Sampling) which provides ultra-sharp imaging with advanced dose efficiency. This exclusive design captures the x-ray image from the incident/patient side of the detector, in contrast to traditional designs which capture the image below the scintillator layer. The result is a reduction in the distance for light to spread, allowing the image to be captured where it’s sharper and stronger as it was always intended.

As a world-leading imaging and information company, Fujifilm is dedicated both to improving image quality and advancing dose lowering technologies and safe healthcare standards for patients. FDR ES is a perfect example. It features engineering innovations which achieve dose efficiency improvements by as much as 30% compared to Fujifilm CR and as much as 20% over comparable DR detector designs, all while delivering exceptional images.

Rounded edges make FDR ES easy to pick up off flat surfaces.
Carbon fiber casings make FDR ES detectors durable and lightweight, with 14×17” weighing only 6.4 lbs.
Sleep mode extends battery life for less frequent battery changes.
Built to protect against incidental sprayed liquid (IPX-3 rating).
Fujifilm detector innovations improve image quality and dose efficiency through advanced processing combined with patented ISS technology and improved circuitry performance.

Model FDR ES C24
Size 24x30cm
External (inches) 13 x 10.6 x 0.6
Connection Tethered
Scintillator Csl
Weight (lbs.) 3.5
Pixel Matrix 1536 x 1920
Pixel Pitch 150µ
Cycle Time (sec.) Less than 9
Image Display (sec.) 1-2

The post Fuji ES 24C Detector with Battery, Tethered appeared first on Auxo Medical.

FDR ES detectors are the next generation of DR retrofit solutions designed with the essential conveniences of Fujifilm image acquisition and design. Light, portable, affordable detectors can optimize your x-ray room for table and free positioning and table top exams with top-of-the-line image quality. There’s also no need to re-work your existing equipment because FDR ES fits existing standard Buckys and holders for simple DR and DR panel retrofits. FDR ES detectors feature 150 micron pixel pitch and a wide 16-bit dynamic range, as well as Fujifilm’s ISS (Irradiated Side Sampling) which provides ultra-sharp imaging with advanced dose efficiency. This exclusive design captures the x-ray image from the incident/patient side of the detector, in contrast to traditional designs which capture the image below the scintillator layer. The result is a reduction in the distance for light to spread, allowing the image to be captured where it’s sharper and stronger as it was always intended.

As a world-leading imaging and information company, Fujifilm is dedicated both to improving image quality and advancing dose lowering technologies and safe healthcare standards for patients. FDR ES is a perfect example. It features engineering innovations which achieve dose efficiency improvements by as much as 30% compared to Fujifilm CR and as much as 20% over comparable DR detector designs, all while delivering exceptional images.

Rounded edges make FDR ES easy to pick up off flat surfaces.
Carbon fiber casings make FDR ES detectors durable and lightweight, with 17×17” weighing only 8.2 lbs.
Sleep mode extends battery life for less frequent battery changes.
Built to protect against incidental sprayed liquid (IPX-3 rating).
Fujifilm detector innovations improve image quality and dose efficiency through advanced processing combined with patented ISS technology and improved circuitry performance.

Model FDR ES C43
Size 17×17
External (inches) 18 x 18 x 0.59
Connection Tethered
Scintillator Csl
Weight (lbs.) 8.2
Pixel Matrix 2836 x 2832
Pixel Pitch 150µ
Cycle Time (sec.) Less than 13
Image Display (sec.) 1-2

Add ons or upgrades:
800047618 FDR ES Wireless Capability
800047085 Silex Wireless Access Point
16445006 Fujifilm AP
800045992 USB Cable Kit
800045736 FDR ES Charger Kit
800047201 Additional Power Box
16441426 FDR D-EVO II / FDR ES SE Cable 10m
16441452 FDR D-EVO II / FDR ES SE Cable 20m
800047218 FDR D-EVO II / FDR ES Power Box & Wireless base room
800042278 24×30 Weight Bearing Cap
800020589 14×17 Weight Bearing Cap
800020590 17×17 Weight Bearing Cap
800017801 FDR ES, D-EVO Protector Cap 14×17 Long Dim. Handle
800021582 FDR ES, D-EVO Protector Cap 17×17 with Handle
800042500 FDR ES, D-EVO Protector Cap 14×17 Short Dim. Handle
800047086 SE Cable Clamp
800046834 Universal Tabletop Cassette Holder
800046444 Lateral Detector Holder
800049009 Mobile Holder for DR Detector
800049761 Mobile Trans-Former for FDR D-EVO Detectors
800020589 14×17 Weight Bearing Stand
800020590 17×17 Weight Bearing Stand
800050717 Fixed Height Mobile Table With Clear Top
800050941 Clear Advantage Mobile Stand
800051079 Mobile Shield With Step
800050942 Two Step Platform
800051191 Footstool, Two Step
800051599 Footstool, Single Step
800018075 18×20 2mil Poly Zip Bag Zip Bag
800011829 UPS, Power Conditioner & Surge Protector

The post Fuji FDR ES 17C Detector with Battery, Tethered appeared first on Auxo Medical.

FDR ES detectors are the next generation of DR retrofit solutions designed with the essential conveniences of Fujifilm image acquisition and design. Light, portable, affordable detectors can optimize your x-ray room for table and free positioning and table top exams with top-of-the-line image quality. There’s also no need to re-work your existing equipment because FDR ES fits existing standard Buckys and holders for simple DR and DR panel retrofits. FDR ES detectors feature 150 micron pixel pitch and a wide 16-bit dynamic range, as well as Fujifilm’s ISS (Irradiated Side Sampling) which provides ultra-sharp imaging with advanced dose efficiency. This exclusive design captures the x-ray image from the incident/patient side of the detector, in contrast to traditional designs which capture the image below the scintillator layer. The result is a reduction in the distance for light to spread, allowing the image to be captured where it’s sharper and stronger as it was always intended.

As a world-leading imaging and information company, Fujifilm is dedicated both to improving image quality and advancing dose lowering technologies and safe healthcare standards for patients. FDR ES is a perfect example. It features engineering innovations which achieve dose efficiency improvements by as much as 30% compared to Fujifilm CR and as much as 20% over comparable DR detector designs, all while delivering exceptional images.

Rounded edges make FDR ES easy to pick up off flat surfaces.
Carbon fiber casings make FDR ES detectors durable and lightweight, with 17×17” weighing only 8.2 lbs.
Sleep mode extends battery life for less frequent battery changes.
Built to protect against incidental sprayed liquid (IPX-3 rating).
Fujifilm detector innovations improve image quality and dose efficiency through advanced processing combined with patented ISS technology and improved circuitry performance.

Model FDR ES G43
Size 17×17
External (inches) 18 x 18 x 0.59
Connection Tethered
Scintillator GOS
Weight (lbs.) 8.2
Pixel Matrix 2836 x 2832
Pixel Pitch 150µ
Cycle Time (sec.) Less than 13
Image Display (sec.) 1-2

Add ons or upgrades:
800047618 FDR ES Wireless Capability
800047085 Silex Wireless Access Point
16445006 Fujifilm AP
800045992 USB Cable Kit
800045736 FDR ES Charger Kit
800047201 Additional Power Box
16441426 FDR D-EVO II / FDR ES SE Cable 10m
16441452 FDR D-EVO II / FDR ES SE Cable 20m
800047218 FDR D-EVO II / FDR ES Power Box & Wireless base room
800042278 24×30 Weight Bearing Cap
800020589 14×17 Weight Bearing Cap
800020590 17×17 Weight Bearing Cap
800017801 FDR ES, D-EVO Protector Cap 14×17 Long Dim. Handle
800021582 FDR ES, D-EVO Protector Cap 17×17 with Handle
800042500 FDR ES, D-EVO Protector Cap 14×17 Short Dim. Handle
800047086 SE Cable Clamp
800046834 Universal Tabletop Cassette Holder
800046444 Lateral Detector Holder
800049009 Mobile Holder for DR Detector
800049761 Mobile Trans-Former for FDR D-EVO Detectors
800020589 14×17 Weight Bearing Stand
800020590 17×17 Weight Bearing Stand
800050717 Fixed Height Mobile Table With Clear Top
800050941 Clear Advantage Mobile Stand
800051079 Mobile Shield With Step
800050942 Two Step Platform
800051191 Footstool, Two Step
800051599 Footstool, Single Step
800018075 18×20 2mil Poly Zip Bag Zip Bag
800011829 UPS, Power Conditioner & Surge Protector

The post Fuji ES 17G Detector with Battery, Tethered appeared first on Auxo Medical.

FDR ES detectors are the next generation of DR retrofit solutions designed with the essential conveniences of Fujifilm image acquisition and design. Light, portable, affordable detectors can optimize your x-ray room for table and free positioning and table top exams with top-of-the-line image quality. There’s also no need to re-work your existing equipment because FDR ES fits existing standard Buckys and holders for simple DR and DR panel retrofits. FDR ES detectors feature 150 micron pixel pitch and a wide 16-bit dynamic range, as well as Fujifilm’s ISS (Irradiated Side Sampling) which provides ultra-sharp imaging with advanced dose efficiency. This exclusive design captures the x-ray image from the incident/patient side of the detector, in contrast to traditional designs which capture the image below the scintillator layer. The result is a reduction in the distance for light to spread, allowing the image to be captured where it’s sharper and stronger as it was always intended.

As a world-leading imaging and information company, Fujifilm is dedicated both to improving image quality and advancing dose lowering technologies and safe healthcare standards for patients. FDR ES is a perfect example. It features engineering innovations which achieve dose efficiency improvements by as much as 30% compared to Fujifilm CR and as much as 20% over comparable DR detector designs, all while delivering exceptional images.

Rounded edges make FDR ES easy to pick up off flat surfaces.
Carbon fiber casings make FDR ES detectors durable and lightweight, with 14×17” weighing only 6.4 lbs.
Sleep mode extends battery life for less frequent battery changes.
Built to protect against incidental sprayed liquid (IPX-3 rating).
Fujifilm detector innovations improve image quality and dose efficiency through advanced processing combined with patented ISS technology and improved circuitry performance.

Model FDR ES G35
Size 14×17
External (inches) 15 x 18 x 0.59
Connection Tethered
Scintillator GOS
Weight (lbs.) 6.4
Pixel Matrix 2836 x 2336
Pixel Pitch 150µ
Cycle Time (sec.) Less than 10.5
Image Display (sec.) 1-2

Add ons or upgrades:
800047618 FDR ES Wireless Capability
800047085 Silex Wireless Access Point
16445006 Fujifilm AP
800045992 USB Cable Kit
800045736 FDR ES Charger Kit
800047201 Additional Power Box
16441426 FDR D-EVO II / FDR ES SE Cable 10m
16441452 FDR D-EVO II / FDR ES SE Cable 20m
800047218 FDR D-EVO II / FDR ES Power Box & Wireless base room
800042278 24×30 Weight Bearing Cap
800020589 14×17 Weight Bearing Cap
800020590 17×17 Weight Bearing Cap
800017801 FDR ES, D-EVO Protector Cap 14×17 Long Dim. Handle
800021582 FDR ES, D-EVO Protector Cap 17×17 with Handle
800042500 FDR ES, D-EVO Protector Cap 14×17 Short Dim. Handle
800047086 SE Cable Clamp
800046834 Universal Tabletop Cassette Holder
800046444 Lateral Detector Holder
800049009 Mobile Holder for DR Detector
800049761 Mobile Trans-Former for FDR D-EVO Detectors
800020589 14×17 Weight Bearing Stand
800020590 17×17 Weight Bearing Stand
800050717 Fixed Height Mobile Table With Clear Top
800050941 Clear Advantage Mobile Stand
800051079 Mobile Shield With Step
800050942 Two Step Platform
800051191 Footstool, Two Step
800051599 Footstool, Single Step
800018075 18×20 2mil Poly Zip Bag Zip Bag
800011829 UPS, Power Conditioner & Surge Protector

The post Fuji ES 14G Detector with Battery, Tethered appeared first on Auxo Medical.