Part Number: 800051360

Features:

• Carbon fiber tabletop – low attenuation for high contrast radiographic images with minimal patient dose.
• Simple ergonomic and robust design to withstand high volume imaging
• Ergonomic handles for safe, easy travel and patient support
• 4-way floating table top – functions without power
• 4 locking swivel wheels – for safe, easy travel maneuverability and secure locked use.
• Electromagnetic and mechanical brakes when power is OFF.
• Foot pedals – control tabletop movements (transversal, longitudinal, raising and lowering).
• Emergency OFF safety switch at table side
• Auto-positioning – site preferred preset height can be configured during installation
• Floor pins – prevent table from tipping over and mark repeatable preferred floor location.
• 4 rechargeable batteries – built into the table base.
• 3-color battery level indicator – at controls with audible warning when batteries reach lowest discharge level.
• Battery operation – lasts up to 16 hours
• Plug in use – table can be operated while plugged into standard 110 VAC outlet
• Recharging time – maximum, 12 hours

Specs:

• Patient maximun load 551 lbs. (250 Kg)
• Dimensions (L x W) 92.7 x 25.6” (235.5 x 65 cm)
• Tabletop travels:
  • Longitudinal 38.6”, ±0.4” (98.2 cm, ±1 cm )
  • Transversal 8.27”, ±0.4” (21 cm, ±1 cm)
  • Vertical 157.5”,23.6” (400 cm, ±6 cm)
  • Maximum height 39.3”, ±1.18” (100 cm, ±3 cm)
  • Minimum height 23.6”, ±1.18” (60 cm, ±3 cm)
• Tabletop radiolucent area: (W x deep) 82.7”x18.1” (210×46 cm)
• Tabletop attenuation < 1,2 mm equival. Al. a 100 KV
• Tabletop composition Laminated or carbon fiber
• Control pedals 4
• Anti-turnover pins 2, optional
• Table fixation pins and housings Optional
• Rechargeable batteries 4
• Battery autonomy 16H with a ratio of 1% elevating movements or ±100 vertical movements
• Recharging time 12H Maximum. Recharging is activated when the equipment is plugged in

The post Fuji Carbon Fiber Top Adjustable Height X-ray Table (P/N: 800051360) appeared first on Auxo Medical.

Part Number: 800051359

Features:

• Simple ergonomic and robust design to withstand high volume imaging
• Ergonomic handles for safe, easy travel and patient support
• 4-way floating table top – functions without power
• 4 locking swivel wheels – for safe, easy travel maneuverability and secure locked use.
• Electromagnetic and mechanical brakes when power is OFF.
• Foot pedals – control tabletop movements (transversal, longitudinal, raising and lowering).
• Emergency OFF safety switch at table side
• Auto-positioning – site preferred preset height can be configured during installation
• Floor pins – prevent table from tipping over and mark repeatable preferred floor location.
• 4 rechargeable batteries – built into the table base.
• 3-color battery level indicator – at controls with audible warning when batteries reach lowest discharge level.
• Battery operation – lasts up to 16 hours
• Plug in use – table can be operated while plugged into standard 110 VAC outlet
• Recharging time – maximum, 12 hours

Specs:

• Patient maximun load 551 lbs. (250 Kg)
• Dimensions (L x W) 92.7 x 25.6” (235.5 x 65 cm)
• Tabletop travels:
  • Longitudinal 38.6”, ±0.4” (98.2 cm, ±1 cm )
  • Transversal 8.27”, ±0.4” (21 cm, ±1 cm)
  • Vertical 157.5”,23.6” (400 cm, ±6 cm)
  • Maximum height 39.3”, ±1.18” (100 cm, ±3 cm)
  • Minimum height 23.6”, ±1.18” (60 cm, ±3 cm)
• Tabletop radiolucent area: (W x deep) 82.7”x18.1” (210×46 cm)
• Tabletop attenuation < 1,2 mm equival. Al. a 100 KV
• Tabletop composition Laminated or carbon fiber
• Control pedals 4
• Anti-turnover pins 2, optional
• Table fixation pins and housings Optional
• Rechargeable batteries 4
• Battery autonomy 16H with a ratio of 1% elevating movements or ±100 vertical movements Recharging time 12H Maximum. Recharging is activated when the equipment is plugged in.

The post Fuji Laminate Top Adjustable Height X-ray Table (P/N: 800051359) appeared first on Auxo Medical.

Carbon Fiber Top

Part Number: 800051331

Size: 78.7 x 25.6 x 27.6”, 66 lb carbon

Open area between wheel base:
76.3 x 25.6″ carbon

Patient capacity 441 lbs. (200 kg)

X-ray Pictured Not Included

The post Fuji Carbon Fiber Top Fixed Height X-ray Table (P/N: 800051331) appeared first on Auxo Medical.

Fixed Height Laminated

Part Number: 800051332

551 lb (250 kg) Patient capacity laminate carbon

78.7L x 25.6W x 27.6″H / Wt 101.4 lb laminate,

Open area between wheel base:
74 x 25.6″ laminate

The post Fuji Laminate Top Fixed Height X-ray Table (P/N: 800051332) appeared first on Auxo Medical.

Table Pictured Not Included, Inquire for options

Persona U is a fully motorized, auto-positioning, single detector DR solution that’s easy to use and versatile. It provides freedom to perform virtually every type of radiographic exam, including upright, seated and supine, even knee and skull exams. Its innovative design simplifies positioning workflow, since its x-ray tube and detector are always aligned regardless of tilt position or detector angle. Its exceptionally high throughput, image quality, dose performance and flexibility make it a great space-saving alternative to traditional table- and overhead based systems without compromise.

The compact all-in-one design is scalable to fit tight spaces and budgets. Since the system is based on a single column floor mounted design and there is no separate wall stand or overhead suspension, it eliminates added costs of ceiling preparations, takes less time to install and fits much smaller spaces. The system is built to last and perform for imaging centers, orthopedic facilities, urgent care clinics and hospital radiology departments.

The standard system includes u-arm, generator, generator console, 17×17″ detector and FDX Console workstation. Component choices include various generator sizes, building power compatibility and auto or manual collimation.

Other options include:
choice of fixed and motorized height mobile patient tables and choices of secondary detectors.

Specs:

Image Detector specs based on FDR ES 17c model
(other CSI & GOS models available)
Image size: 17 x 17” (43 x 43cm)
Outer dimensions: 18” x 18” x 0.6”
Pixels: 2,836 x 2,832 pixels
Pixel Pitch: 150 micron, 16 bits/pixel
FDX Console technologist workstation. Preview image display
time: 2-7 seconds
NOTE: choices of detector and workstation sold separately.
Universal Arm
Dual speed motorized movements
Vertical travel: 47.8″, speed 3.4“/sec.
Arm Rotation: +150° (90° +/-30°)
Tube Rotation: 180°
Detector Tilt: +/-45°*
SID: 39.4 – 70.8” (100 – 180 cm)
Collimator: Manual or Automatic with laser & light field,
rails for accessories & tape measure
Generator Console – system includes 17″ touchscreen
console. Allows patient specific fine tuning of techniques
and positioning parameters.

Power Requirements:
Generator:
Line Voltage: 230/240 VAC, +/-10%
Power Consumption: 2.5 kVa, Std. 15 kVa (80 w standby)
Detector: Single-phase 50/60 Hz: 110-240 V 10%, 2.1, 2.5 A
Universal Arm: Single-phase 50/60 Hz: 230/240 V,10%

Dimensions:
Universal Arm: Floor to ceiling or wall support
Min Room: 106.3H x 84W x 84″L
Dimensions (WxDxH): 84 x 66 x 88.2”; Wt. 714 lb
Controller Box: 23 x 17 x 24”; 139 lb
Generator: 23 x 17 x 27” (wt. varies by kW size)

Options – Pricing provided upon request
Collimator: Manual or Automatic
Generator: 40, 50, 65, 80 kW
Tube: 300, 400, 600 kHu
Mobile Tables – Fixed or Adjustable height (sold separately)
Table Top Detector Holder
Fixed Grid: 103 lines, Ratio 10:1, FD 59″ (150 cm)Fixed Grid Option: 103 lines, Ratio 10:1, FD 39.4″ (100 cm)

The post Fuji Digital Radiography U-arm System w/ 17×17 Detector and FDX Console Workstation appeared first on Auxo Medical.

Essentia FS is a feature rich digital radiography room solution with a space saving design. The standard configuration includes a generator, floor mounted tube stand, chest stand and table. The system features an advanced user-friendly 10″ touchscreen for streamlined controls at the patient side.

Essentia FS is a feature rich digital radiography room solution with a space saving design. The standard configuration includes a generator, floor mounted tube stand, chest stand and table. The system features an advanced user-friendly 10″ touchscreen for streamlined controls at the patient side. The graphic interface displays tube angulation, SID, automated tube tracking and more. Complimented with a range of advanced safety and workflow features, Essentia FS is a high performance x-ray system with unparalleled price-performance ratio.

Floor Mounted Tube Stand:
10” Intuitive Touchscreen
Preset source to image distance (SID) with Auto Tube Tracking.
Manual Movement Vertical/longitudinal traved controlled by electric magnet brake
Tube rotation : ±135°
Tube head telescopic extension: ±4.7 in. (±12 cm)
Column rotation : ±90°
Travel Range Vertical (Tube) : 58.7 in. (149 cm)
Longitudinal (Column) : 100 in. (254 cm)
Power Requirement 24 VDC, 3 A

Real time display of SID and tube angulation.
Controls for exam parameters at the patient side, ease patient comfort and technologist workflow.

Premium Wall Stand
Light, easy positioning with motorized, counter balanced controls and electromagnetic locks.
Convenient hand grips optimize safe and steady patient positioning.
The stand’s rotating bucky tray accommodates a 14×17″ detector.
Bucky tray can be adapted to accommodate a 17×17″ detector during service installation.
Manual Movement Vertical travel with electromagnetic brake
Vertical travel Range Max : 74 in. (188 cm)
(central beam-floor) Min : 15.7 in. (40cm)
Power Requirement 24 VDC, 1 A

Motorized Elevating Table Specifications.
• Patient Weight Capacity: 550 lbs.
• Wireless foot switch controls

Tabletop Dimensions 90 x 32 in.
Tabletop Travel Range Left & Right : ±33.5 in. | Forward & Back : ±7 in.
Up & down : ±10 in. | tabletop height : min. 21.5 in. ~ max. 31.5 in.
Detector Travel Range Left & Right 19.5 in.
Power Requirement 120~240 VAC, 50/60Hz, 500 VA

Configurations:
• System sold as a complete radiographic suite with chest stand, table, generator and tube stand configurations

• 14×17″ rotating bucky trays in both table and upright. 17×17″ bucky tray adapter can be installed at initial installation
• Automatic motorized tube tracking to table and upright detector height
• Generators with 3-point Control Console:
• 40 kW single-phase, 230 VAC, 500 mA
• 50 kW 3-phase, 230 VAC, 630 mA
• 50 kW 3-phase, 480 VAC, 630 mA
• 65 kW 3-phase, 480 VAC, 800 mA
• X-ray Tubes with 200 kHu tube (w/40 or 50 kW gen) focal spot 300 kHu tube (w/ 40, 50 or 65 kW gen)
• Manual collimator
• Right or left opening non-tilting wall stand
• Table top detector holder for cross table exams (option)
• Single or multiple flat panel detector workflow (option)

The post Fuji FDR Essentia FS Digital Radiography Suite appeared first on Auxo Medical.

FDR Clinica X is a scalable digital x-ray suite for hospital radiology and outpatient imaging departments of all sizes–providing affordability and versatility without compromise. Step up your imaging to deliver Fujifilm’s innovative image processing and high sensitivity image acquisition technologies to your patient exams. FDR Clinica X is scalable to meet any department’s budgetary and workflow requirements. The system and its generator controls are fully integrated with Fujifilm’s FDX Console PLUS technologist workstation and lightweight, durable and dose efficient FDR D- EVO II, III and FDR ES detectors.

Ceiling Suspended Tube Stand System Configuration
With easy articulation and rotating display, the tube extends as much as 63 in. from ceiling. Optional automated tube height tracking, collimation and centering with the height of the upright or table, eliminates workflow steps to speed exams. Allows the technologist to
focus on the patient.

Chest Stand with Automatic Tilting
Automatic and manual tilting upright bucky stands are optionally available. Simplifying positioning for technologists and improving exam comfort for seated patients or patients in wheelchairs.

Elevating Patient Table
Motorized elevating, 4-way floating top table with a heavy-duty weight limit of 661 lbs. (300 kg) 86.6(W)x31.9(L)x1.8(H) inch top with flat edges, +/-20 ̋ Longitudinal & +/-5 ̋ Lateral travel. ̃22-33 ̋

FDR Clinica X Floor Stand Suit
Full featured solutions for tight spaces, lower room preparation costs and limited building power requirements.

The post Fuji FDR Clinica X Radiology Suites appeared first on Auxo Medical.

800052026 FDR D-EVO III G80i Panel Only

Articulating Cart Pictured not included, see further below for additional pricing.

Fujifilm’s latest generation ultra-lightweight, wireless long length detector features a 17×32” field of view and weighs just 12 lbs. FDR D-EVO III G80i brings added portability for spine and leg surgery uses, along with traditional upright and supine long length exams. FDR D-EVO III G80i’s light and thin design is ideal for trauma imaging in the ER and spine, leg and other surgical procedures. It can be used pre-, intra-, and post- surgery for precise verification of planning, measurements, hardware alignments, angles, counts and more. Its wireless connectivity to the console eliminates cords for safer, easier workflow in tight, sterile OR and ER environments. Its Hydro AG protective antibacterial coating provides added safety in infection controls and sterile field uses.

Features and Specs:

• 17×32″ instant images available anywhere you need them
• Long length DR with enhanced portability for conventional weight bearing exams along with added flexibility for room to room, supine, surgical and trauma imaging
• Full length views in a single, instant exposure with one seamless length detector
• No stitching alignment or motion retakes
• Faster acquisition of long-view images
• Fewer exposures lower patient exposure to radiation
• At just 12 lbs G80i is the world’s lightest long length DR detector. Ultra-light positioning and cord-free design makes it easy to move from room to room.
• Smooth, sealed design protects circuitry from body fluids and disinfection wipe downs.
• Fujifilm’s proprietary Hydro Ag antibacterial coating effectively prevents 99.99%** bacterial growth on the detector’s surfaces, enhancing infection controls and helping prevent HAIs
• Choice of stands provide optimal positioning for weight bearing upright, supine, cross table, table-top and even under the surgery table
• Model name:
  Flat Panel Detector (DR-ID 1836SE)
  for FDR D-EVO III System (DR-ID 1800)
• Type:
  Cassette type detector with ISS
  (Irradiation Side Sampling)
  and glass-based TFT detector
• Scintillator:
  GOS (Gadolinium oxysulfide)
• Detector external size:
  850 × 460 × 15mm (Approx.)
  [33.4″ × 18.1″ × 0.6″]
• Weight:
  Approx. 5.2kg (excludes battery pack)
• Pixel pitch/Pixels:
  Pixel size 150µm/5,376 × 2,832pixels
• Detector Area:
  31.8” x 16.7” (Pixel matrix size 5376 x 2832 pixels)
• Field of View:
  16.7″×31.8″
• Wireless standard:
  IEEE 802.11n, IEEE 802.11ac
  (2.4GHz, W52/W53/W56/W58)
• Image preview:
  Less than 2.5sec (wired/wireless)
• Cycle time:
  Less than 7.5sec (wired/wireless)
  Less than 10sec (SmartSwitch)
• Battery recharging time:
  Approx. 3hours (with battery charger)

Options/Add Ons:

• Add FDX Console
• Add FDR Flex w/ Laptop
• 800052053 FDR D-EVO III G80i Articulating Cart
• 800052260 Mobile Detector Holder for G80i
• 800052051 FDR D-EVO III G80i Weight Bearing Cap
• 800052052 FDR D-EVO III G80i Grid

The post Fuji FDR D-EVO III G80i 17×32 in Full Spine Detector Panel Only appeared first on Auxo Medical.

800046893 FDR D-EVO GL with Rolling Stand

Fuji FDR D-EVO GL long-view single exposure detector ensures consistent, easy patient positioning and repeatable image acquisition, reducing exam discomfort for a better patient experience. FDR D-EVO GL’s single exposure DR, when used with Virtual Grid software, can reduce dose as much as 50% compared to grid exams.

The Fuji FDR D-EVO-GL is 17×49 inches, expanding the traditional 14 inch CR long length field of view by 3 full inches to better accommodate a variety of patient sizes and help prevent retakes due to anatomy cut off.

The Fuji FDR D-EVO-GL enhances the workflow of long-view radiography by capturing the entire image in a single exposure in just a few seconds, reducing the chance for patient motion-induced artifacts and time for the patient to remain still.

Features:

Refined Dynamic Visualization image processing produces exceptional images
FDR D-EVO GL utilizes the latest Fujifilm digital image processing technology, including Dynamic Visualization, which optimizes image display based on recognition of contrast levels throughout the entire exposure field. The resulting first-up images have outstanding detail and greater window and leveling capability in PACS.

Intelligent Virtual Grid image processing for situations where grid use can be challenging
Virtual Grid intelligent image processing replaces the use of a grid to enhance contrast and improve clarity while reducing dose as much as 50% compared to exams performed with a grid.

Patented ISS capture technology promotes high sensitivity
Fujifilm’s proprietary Irradiated Side Sampling (ISS) positions its capture electronics (TFTs) at the irradiation side, in contrast to traditional detectors. This design significantly suppresses scattering and attenuation of X-ray signals, improving efficiency to produce sharper images at lower doses compared to traditional designs.

Noise reduction circuitry improves sensitivity in high absorption regions
A unique, Fujifilm innovation in noise reduction circuitry maximizes signal strength to improve image quality in high absorption areas. This enhancement achieves 1.7 times the DQE of previous models, with as little as 0.03mrad dose. Visibility of dense areas such as the heart and mediastinum is greatly improved.

SmartSwitch Technology
Fujifilm’s SmartSwitch technology enables automatic x-ray detection. FDR D-EVO GL automatically senses exposures to trigger image capture, allowing easier, faster interfacing with any x-ray system

Specs:

• Detector external size: 52.7 x 22.3 x 2.0 in.
• Weight: Approx. 43.0 lbs.
• Pixel pitch Pixels: 150 μm
• Image preview: 8228 x 2832 pixels: 17 x 49 in. size reading: 9-20 sec., 17 x 17 in. size reading (single detector segment): 6 sec.
• Cycle time: 17 x 49 in. size reading: 26 sec., 17 x 17 in. size reading (single detector segment): 10 sec.

Options/Add Ons:

• 800047463 FDR D-EVO GL Weight Bearing Cap
• 800053594 FDR D-EVO GL Grid 8-1 103 Rev. A (for fixed and articulating stands)
• 800053698 FDR D-EVO GL Grid for Mobile Stand 8-1 103 LPI A
• 800048016 Rolling Workstation Cart
• 800048577 MP Holder for FDR D-EVO GL Articulating Stand
• 16515734 FDR D-EVO GL SE Cable 20M
• 16515722 FDR D-EVO GL SE Cable 10M
• 16663103 FDR D-EVO GL SE Cable 4M
• 800048580 25’ 125V Hospital Grade Power Cord
• 800046494 FDR D-EVO GL Rolling Stand

The post Fuji FDR D-EVO GL 17×49 in Full Spine Length Detector With Rolling Stand appeared first on Auxo Medical.

Features:

Fujifilm’s lightest DR detector with flexible film-based TFT circuitry
By replacing the glass-based TFT layer with a high-tech thin film layer, FDR D-EVO III is 40% lighter than the original 1st generation FDR D-EVO model and 20% lighter than FDR D-EVO II.

Higher DQE 33% (1Lp/mm-RQA5 1mR)
Innovative film-based capture layer helps reduce signal blur, providing excellent DQE and dose performance.

Enhanced durability to endure tough medical environments
By eliminating the most fragile (glass) component, the new flexible film-based TFT detector improves durability and decreases risks of shock damage compared to previous FDR D-EVO models.

Patented ISS capture technology promotes high sensitivity
Equipped with Fujifilm’s patented Irradiated Side Sampling (ISS) technology which bonds its capture electronics (TFTs) to the x-ray irradiation side, in contrast to traditional detectors. This design suppresses scattering and attenuation of x-ray signals, to produce sharper images at lower doses compared to traditional designs.

Unique formulation of large and small phosphor particles at a optimal ratios, enhances x-ray absorption
Increased x-ray absorption is achieved through our uniquely formulated scintillator layer, which employs photographic film technology to optimize the blending ratio of phosphor particles to minimize blur and enhance sharpness.

Fujifilm’s noise reduction circuitry improves detector sensitivity in high absorption and low dose images
Uniquely engineered noise reduction circuitry reduces noise in the image to improve signal strength. This results in 33% DQE even at 0.1mR. The granularity and visibility of dense, low penetration or ultra low dose regions are improved.

Improved handling
Simple battery replacement workflow
The battery can easily be replaced with one hand and the detector can be back up and ready in ~90 seconds. This eliminates concerns about battery life or on-demand battery swaps even in the midst of critical care.

Suitable for outdoor use with an expanded spectrum
Supports 2.4GHz and 5GHz (W52/53/56/58)* spectrum. Suitable for outdoor use during disaster response.

Memory Mode
Dedicated memory mode enables added emergency uses. Built-in memory stores up to 100 images. Images are retained even if detector power is interrupted. Digital readout on detector face tracks images stored and increments as they are acquired.

Flexibility – On-Demand Use
FDR D-EVO III’s unique combination of form and function brings significant value to traditional room retrofit and mobile uses. The additional capabilities of Memory Mode and Smart Switch bring added value for emergency, on-demand backup and failsafe uses with any portable, room or even for remote off-site and disaster response uses.

Advanced image processing
Virtual Grid: High quality images without a physical grid
Advanced processing simulates scatter clean up without a physical grid, correcting for the effects of scatter radiation while retaining contrast and sharpness. Eliminating the grid improves patient comfort, simplifies positioning and allows as much as 50% lower dose compared to grid exams. Grid cutoff and retakes associated with misalignment of X-ray tube and grid are also prevented.

Dynamic Visualization II: Intelligent feature recognition technology optimizes image quality
Advanced algorithms optimize contrast and density based on anatomic definition, hardware and thickness characteristics, resulting in outstanding detail and greater window and leveling capability in PACS.

Specs:

• Type: Detector with patented ISS (Irradiation Side Sampling) and flexible film-based TFT detector technology
• Scintillator: GOS (Gadolinium oxysulfide)
• Detector external size: 18 x 18 x 0.6″ approx. (460 x 460 x 15mm)
• Weight: 4.6 lbs. (2.1 kg) excludes battery
• Pixel pitch: 150μm, 16 bits per pixel
• Pixels: 2836 x 2336 pixels
• Image preview: Less than 2 sec
• Cycle time: Less than 10 sec (wired), Less than 11 sec (SmartSwitch)
• Battery recharging time: Approx. 3 hours (with battery charger), Approx. 4 hours (with Docking Stand)

ADDITIONAL Configurations:
ADD FDX
ADD Docking Stand
ADD Power Box

FDR D-EVO III Accessories
16648725 FDR D-EVO III Battery (standard)
16648737 FDR D-EVO III Battery Charger Upgrade Kit
800049194 FDR D-EVO III Battery Charger Kit
800051782 FDR D-EVO III 25×30 weight bearing cap

The post FDR D-EVO III G43 17 x 17” Detector Panel Only appeared first on Auxo Medical.