Steris AMSCO SV-120 Prevacuum Steam Sterilizer (20″ x 20″ x 38″ Chamber, 250 Liters / 66 gallons) is designed for sterilization of nonporous heat- and moisture-stable goods, sterilization of liquids and media applications. This laboratory steam sterilizer provides high quality repeatable performance and accountability for a wide range of lab applications, including: liquids, media, glassware, instruments, clothing, waste, media clothing and laboratory items. 

Features:

• Chamber material and pipe work 316L stainless steel
• Fully jacketed chamber
• Vertical opening doors with glass panel
• ALUS chamber rail for racks
• 6.5” (165 mm) high resolution color touch screen
• Interface to tracking system XLM and PDF format
• External USB connection for data download (on loading side)
• Matrix printer on loading side with A4 print out capability
• Additional touch screen provided on the unloading side
• Independent temperature probe (chamber)
• Pneumatic valves
• Air filter
• Pressure gauges for jacket, chamber, steam generator (loading side), chamber (unloading side)
• Water level gauge for steam generator
• Safety temperature switch for door opening
• Acoustic signal for end cycle and alarms
• Programmable timer start for test cycles
• Potential free outputs for critical alarms
• Sanitary piping with Tri-clamp
• Water Saving System For Vacuum Pump
• Separate water feed line for steam generator and vacuum pump
• Drain discharge cool down

Standards:

• Each sterilizer meets applicable requirements of the following listings and standards, and carries the appropriate symbols:
  • Underwriters Laboratories (UL) Standard 544 as certified by ETL Testing Laboratories, Inc.
  • Canadian Standards Association (CSA) Standard C22.2 No. 125.
  • ASME Code, Section VIII, Division 1 for unfired pressure vessels. The pressure vessel is so stamped; ASME Form R-1 is furnished. Shell and door are designed for maximum allowable working pressure of 42 psig (289.6 kPa) for 16 x 16 x 26″(406 x 406 x 660 mm) sterilizers and 40 psig (275.8 kPa) for 20 x 20 x 38″ (508 x 508 x 965 mm) sterilizers.
  • ASME Code, Section I, Part PMB, for power boilers, if optional steam generator is supplied.
  • Seismic Pre-approval R-0282.

Breakdown of Prevacuum vs. Gravity 

• Gravity - designed for sterilization of liquids in flasks with vented closures, at 250°F (121°C), and also heat- and moisture-stabile goods at 270°F (132°C).
  
• Prevacuum – designed for efficient, high-volume processing of heat- and moisture-stabile materials, such as fabrics, wrapped hard goods, glassware or animal bedding, at 270°F (132°C). Prevacuum units will also run gravity-type cycles.

Gravity units operate by the gravity downward displacement air-removal principle. Prevacuum sterilizers have a chamber evacuation system for high-speed, high-volume sterilization. Both types use steam-under-pressure as the sterilizing agent.

The post Steris AMSCO Century Small Sterilizer – Steris SV-120 Steam Sterilizer appeared first on Auxo Medical.

Steris AMSCO G-120 Gravity Steam Sterilizer (20″ x 20″ x 38″ Chamber, 250 Liters / 66 gallons) is designed for sterilization of nonporous heat- and moisture-stable goods, sterilization of liquids and media applications. This laboratory steam sterilizer provides high quality repeatable performance and accountability for a wide range of lab applications, including: liquids, media, glassware, instruments, clothing, waste, media clothing and laboratory items. 

Features:

• Chamber material and pipe work 316L stainless steel
• Fully jacketed chamber
• Vertical opening doors with glass panel
• ALUS chamber rail for racks
• 6.5” (165 mm) high resolution color touch screen
• Interface to tracking system XLM and PDF format
• External USB connection for data download (on loading side)
• Matrix printer on loading side with A4 print out capability
• Additional touch screen provided on the unloading side
• Independent temperature probe (chamber)
• Pneumatic valves
• Air filter
• Pressure gauges for jacket, chamber, steam generator (loading side), chamber (unloading side)
• Water level gauge for steam generator
• Safety temperature switch for door opening
• Acoustic signal for end cycle and alarms
• Programmable timer start for test cycles
• Potential free outputs for critical alarms
• Sanitary piping with Tri-clamp
• Water Saving System For Vacuum Pump
• Separate water feed line for steam generator and vacuum pump
• Drain discharge cool down

Standards:

• Each sterilizer meets applicable requirements of the following listings and standards, and carries the appropriate symbols:
  • Underwriters Laboratories (UL) Standard 544 as certified by ETL Testing Laboratories, Inc.
  • Canadian Standards Association (CSA) Standard C22.2 No. 125.
  • ASME Code, Section VIII, Division 1 for unfired pressure vessels. The pressure vessel is so stamped; ASME Form R-1 is furnished. Shell and door are designed for maximum allowable working pressure of 42 psig (289.6 kPa) for 16 x 16 x 26″(406 x 406 x 660 mm) sterilizers and 40 psig (275.8 kPa) for 20 x 20 x 38″ (508 x 508 x 965 mm) sterilizers.
  • ASME Code, Section I, Part PMB, for power boilers, if optional steam generator is supplied.
  • Seismic Pre-approval R-0282.

Breakdown of Prevacuum vs. Gravity 

• Gravity - designed for sterilization of liquids in flasks with vented closures, at 250°F (121°C), and also heat- and moisture-stabile goods at 270°F (132°C).
  
• Prevacuum – designed for efficient, high-volume processing of heat- and moisture-stabile materials, such as fabrics, wrapped hard goods, glassware or animal bedding, at 270°F (132°C). Prevacuum units will also run gravity-type cycles.

Gravity units operate by the gravity downward displacement air-removal principle. Prevacuum sterilizers have a chamber evacuation system for high-speed, high-volume sterilization. Both types use steam-under-pressure as the sterilizing agent.

The post Steris AMSCO Century Small Sterilizer – Steris G-120 Steam Sterilizer appeared first on Auxo Medical.

Refurbished Steris AMSCO Model 3011 Steam Sterilizer includes: Stage 3 Controller with thermal printer, For Recess Mount, Chamber DIMS 16 x 16 x 26 (110 L), gravity, Thermal display with touchpad operation.

Steris AMSCO Stage 3 Models 3011, 3021, 3031, 3041, and 3051 are designed for sterilization of liquids in flasks with vented closures, at 250°F (121°C), and also heat- and moisture-stabile goods at 270°F (132°C). For quotes on these various models you may submit a quote here and in follow up request a specific Steris AMSCO 3000 series model.

Features:

• Stage 3 controller with thermal printer
• Single Radial arm manual door (optional hinge)
• Recess Mount
• Interior chamber size of 16″ x 16″ x 26″ (110 Liters)
• Gravity configuration
• Thermal display with touch pad operation
• Hydrostatically tested pressure chamber

Warranty: 1 Year Parts & Labor, 6 months on PM Parts, 5 years on pressure vessel.

Additional Information:

• All refurbished steam sterilizers are fully disassembled and rebuilt using all OEM parts and procedures.
• Optional Stainless steel side panels available.
• Optional 30kW steam generator for electrical units.
• Standard Preventative Maintenance must be completed while unit is under warranty
• Additional freight and installation charges apply.

What is the difference between the two configurations: Gravity & Prevacuum?

• Gravity - designed for sterilization of liquids in flasks with vented closures, at 250°F (121°C), and also heat- and moisture-stabile goods at 270°F (132°C).
  
• Prevacuum – designed for efficient, high-volume processing of heat- and moisture-stabile materials, such as fabrics, wrapped hard goods, glassware or animal bedding, at 270°F (132°C). Prevacuum units will also run gravity-type cycles.

Gravity units operate by the gravity downward displacement air-removal principle. Prevacuum sterilizers have a chamber evacuation system for high-speed, high-volume sterilization. Both types use steam-under-pressure as the sterilizing agent.

The post Steris AMSCO Stage 3 Series 16″ 3011 Sterilizer – 110 Liters appeared first on Auxo Medical.

AMSCO C Series Refurbished Small Steam Sterilizers are designed for sterilization of materials used in healthcare facilities. The sterilizers are refurbished to OEM specifications and upgraded to meet the most current standards of the Association for the Advancement of Medical Instrumentation (AAMI). The sterilizers are designed for fast, efficient sterilization of heat- and moisture-stable materials in addition to sterilization of items for immediate use. AMSCO C Series small sterilizers are equipped with prevacuum, gravity, leak test and daily air removal test cycles. An optional Steam Flush Pressure Pulse (SFPP) configuration sterilizer adds SFPP cycles.

FEATURES:

• AMSCO C Series control system with enhanced functionality and user-friendly interface screen.
  • Touch-sensitive screen with 30-line x 40-character display area
  • Ink-on-paper impact printer
  • Help screens for programming and troubleshooting alarm conditions
  • Automatic check of control program and cycle data maintains process integrity
  • Service reprogrammable flash ROM memory
• Vertical sliding door with hands-free loading and unloading capability.
  • Foot pedal activated door opening and closing
  • Non lubricated, steam-activated door seal
• Modularized vessel and piping for increased dependability and maximum up time.
  • Reduced piping components increase reliability
  • Emergency manual exhaust valve
  • Electronic water saving control
• Interior Dimensions
  •  20″ x 20″ x 38″ (508 x 508 x 965 mm)

The post Steris AMSCO C Series 20″ Sterilizer appeared first on Auxo Medical.

The AMSCO 7052HP Single-Chamber Washer/Disinfector is a cabinet-type mechanical washer that includes:

• Color touch screen control system and visual progress indicator
• Audible warning system with adjustable volume
• Space saving, power vertical sliding doors
• Eight factory-loaded (Instruments, Orthopedic Instruments, Utensils, Plastic Goods, Rigid M.I.S., Anesthesia / Respiratory Goods, Gentle and Decontamination) and up to 20 Custom cycles. Each cycle is effective, fast, energy efficient and may be customized (within allowed range of parameters) to meet specific operating requirements
• LED status indicator lighting
• Compact space saving footprint
• Conforms to seismic building code requirements
• Patented spray arm system providing entire chamber coverage
• 180 degree reverse installable

SPECS:

• Fastest instrument cycle time on the market** – 16 minutes
• DIN Trays per cycle 10
• Offered in Steam Heat: 208V
• Exterior Dimensions: 42 x 80-3/4 x 32″
• Chamber Dimensions: 26-1/2 x 26-1/4 x 25-1/2″
• Load Height: 31″ above finished floor
• Hot, Cold and Pure Water; Steam; Condensate Return: 1/2″ NPT
• Air: 1/8″ NPT
• Ventilation: 3″ (76 mm) O.D.
• Drain: Recommended minimum 4″ (102 mm) floor drain. A
• Clearance between the top of the unit and the ceiling must be at least 14″

The post Steris Amsco 7052 Single Chamber Washer Disinfector appeared first on Auxo Medical.

Product Configurations

• Interior Chamber Dimensions
  • 26 x 37.5 x 36″
  • 26 x 37.5″ chamber cross-sections are sized for efficient, high-volume sterilization processing. Fast-operating, low-effort manual door lock mechanism (hinged-door models) allows door to be locked or unlocked using a single 30° handle motion.
• Vacuum pump effectively pulls chamber to specified vacuum levels and reduces water consumption.
• Steam
  • 1″ NPT, 50 to 80 psig (3.5 to 5.6 bar) dynamic, 97% to 100% vapor quality.
• Drain
  • 2″ ODT drain terminal. (Floor drain capacity must handle peak water consumption; refer to Utilities Consumption, page 6.)
• Electrical – Controls
  • 120 Volt, 50/60 Hz, 1-phase, 2.0 Amp
• Electrical – Vacuum Pump
  • 208/240 Vac, 50/60 Hz, 3-phase, 6 Amp per phase
  • 380/415 Vac, 50/60 Hz, 3-phase, 3 A per phase
  • 480 Vac, 50/60 Hz, 3-phase, 3 Amp per phase
• Sterilizer Feed Water
  • 1″ NPT, 20 to 50 psig (1.4 to 3.5 bar) dynamic. Water is used for vacuum pump, heat exchanger and trap cooling. Refer to Water Quality Recommendations listed on page 6 of technical data sheet

All processing cycles factory programmed into the sterilizer control have been validated to AAMI ST8.

Each sterilizer meets the applicable requirements of the following listings and standards, and carries the appropriate symbols:

• Underwriters Laboratory (UL) Standard 61010-1 as certified by ETL Testing Laboratories, Inc.
• CAN/CSA-C22.2 No. 61010-1.
• ASME Code, Section VIII, Division 1 for unfired pressure vessels. The pressure vessel is so stamped; ASME Form U-1 is provided with shipment. Shell and door are constructed to withstand working pressure of 45 psig.

The post Steris 400 Series 36” House Steam Sterilizer Recessed appeared first on Auxo Medical.

Medical practices need strict cleaning, disinfection, and sterilization of instruments before they can be used on patients. Thermal High Disinfection employs moist heat above 194° for a minimum of 5 minutes to kill bacteria and viruses in the washing phase.

The Tiva line provides:

• Thermal High Disinfection to achieve a complete decontamination cycle.
• Minimizes consumption and operation costs while maximizing sustainability
• Improves user experience with an advanced control system and an easy to use interface
• Touch panel, color graphic display and real-time monitoring
• A total of 40 programs: Preset and programmable cycles
• Air drying prefilter + HEPA H14 filter
• Integrated water softener
• 2 dosing pumps with flowmeter for alkaline detergent and neutralizer (additional pump optional for TIVA2-H TD)
• USB/Printer for data documentation
• Provides complete & total evacuation of previous water (ETS)

Utility Requirements:

• Water Connections
  • Cold water connection for TIVA2 (default)
  • Connection for demineralized water
  • Integrated Water Softener with Salt Box
• Electrical Connections
• 208+240V 1 phase 60Hz

TIVA2 TD Under Counter Washer Specs:

• (WxDxH) 23.4” x 21.3” x 32.2”
• Usable Chamber Volume: 65L

Includes Medical or Dental Rack as shown in Brochure

The post Tuttnauer TIVA 2 Undercounter Washer Disinfector – Medical appeared first on Auxo Medical.

FEATURES:
Chamber and Jacket
The AMSCO 600 series sterilizer chamber has a 26.5 x 26.5″ cross section and is sized to allow for efficient high-volume processing of sterilization containers, trays and packs.

26.5 x 26.5 x 39”; 450L

The cycles available on the AMSCO 600 Steam Sterilizer facilitate efficient processing. The unit offers 32 user programmable† cycle options, including prevacuum and gravity cycles designed for steam sterilization of various types of products such as instruments (in trays) and rigid containers, textiles, and pouched items. The AMSCO 600 Steam Sterilizer also offers standard test cycles (Warm-up, Bowie-Dick/air removal and leak test). All processing cycles offer user-programmable options, allowing operators to customize sterilize times above AAMI recommended minimums, temperatures within cleared 270-275°F (132- 135°C) range and dry times from 0-120 minutes to meet various instrument manufacturer IFUs. AMSCO 600 Medium Steam Sterilizers come standard with a 2-stage electric vacuum pump that provides a fast, deep vacuum for more efficient drying.

Includes Loading Trolley and Carriage
Includes Vacuum Pump
Choice of 208-240, 380-415, 440-480
Includes 45kW Electric Steam Generator
Choice of 208, 220-240, 380-415, 440-480

15 Year warranty on Vessel of Sterilizer

The post Steris Amsco 600 26.5 x 26.5 x 39″ Sterilizer appeared first on Auxo Medical.

STAINLESS STEEL DOOR, HOT AIR DRYING, LCD STEELCO DS500CL Instrument Washer and Disinfector

Features:

• High performance washer for washing of items used in Medical Facilities
• Under Counter Washer
• LCD Display, 40 Programs
• 3 Water Connections
• Drain Water Cool Down
• Steam Condenser
• Electrical Heater
• 2 Dosing Pumps
• Electrical Hot Air Drying / Non-Vented 1x240V or 3x208V, 60Hz
• UL listed

Options:

• Booster pump DI water
• Additional dosing pump
• Drain pump
• Hepa air filter H14
• Printer – Thermic, 40 columns, RS232 on front panel

The post Steelco DS500 CL Under Counter Instrument Washer appeared first on Auxo Medical.

The Hydrim L110w can be installed under the counter. It requires a 208-240V, 60Hz outlet, hot and cold water inlets (standard configuration) and a drain.
The unit is supplied with one hot water and one cold water hose which are 6 1/4 ft long with 3/4″ female fittings. The drain tube provided with the unit is 5 ft long with an inner diameter of 3/4″.
In case extension is needed, please note that the drain tube should not exceed 10 ft.

Technical Specifications:

• Overall product width: 23.75 in
• Overall product height 33.50 in
• Overall product depth: 23.75 in
• Depth with door open: 47.00 in
• Unpacked weight: 176 pounds
• Water softener Capacity : 2.2lbs
• Running noise: 60dB
• Drying system: Heater and blower
• Hot and cold water connections: 3/4″ Garden Hose, Male
• Recommended hot and cold water temperatures: Hot – 122°F to 158°F / 50°C to 70°C
• Cold – 86°F / 30°C
• Drain: 3/4
• Inlet water pressure: 1 – 10 bar / 14.5 – 145 psi
• Electrical connections: 208 – 240V, 60Hz, 15 amp

The post SciCan Hydrim L110W Washer appeared first on Auxo Medical.