Covidien ValleyLab FX8 Features

• A true next-generation electrosurgical solution, the Valleylab™ FX8 energy platform is powered by our intelligent TissueFect™ tissue-sensing technology. So it reads tissue composition to monitor and adjust to impedance as you work.
• The Valleylab™ FX8 energy platform drives electrosurgical handpieces with precision using lower levels of energy.1,2 It’s designed to support a wide range of surgical procedures that require division, hemostasis, and dissection.
• Along with cut, coag, and soft coag modes, the Valleylab™ FX8 energy platform enables two unique modes that can bring new possibilities to your procedures:
• Valleylab™ mode provides a unique combination of monopolar hemostasis and division
• Shared coag mode allows two surgeons to work on the same patient at the same time — from a single energy platform
• Precise delivery of monopolar and bipolar energy
• Power control during monopolar energy delivery that’s five times better than the ForceTriad™ energy platform
• Tissue monitoring that’s 2600 times faster than the Force FX™ electrosurgical generator.
• Appropriate thermal spread
• General
  • Output configuration: Isolated output
  • Cooling: Natural convection and fan
  • Display: 15.7 cm (6.2 in) LCD touchscreen
  • Enclosure: Magnesium
• Mounting
  • Valleylab™ universal generator cart (VLFTCRT)
  • Operating room boom systems
  • Any stable, flat surface such as a table or cart top
• Operating Parameters
  • Ambient temperature range: 10°C to 40°C (50°F to 104°F)
  • Relative humidity: 15% to 85% noncondensing
  • Atmospheric pressure: 700 to 1060 millibars
• Temperature and Storage
  • Ambient temperature range: -10°C to 60°C (14°F to 140°F)
  • Relative humidity: 15% to 90% noncondensing
  • Atmospheric pressure: 500 to 1060 millibars
• Input Power 100-127 VACe
• Line Ranges
  • Line Voltage Full Regulation Range: 90–140 VAC
  • Line Frequency: 47–63 Hz
  • Max VA Nominal Line Voltage: 660 VA
  • Max Mains Current: 6.6 ARMS
  • Max Heat Dissipation 180 W
• Fuses
  • 10 A
  • Fuses (2) – 5 mm x 20 mm
    • 10 A, 250 V fast blow
• Input Power 220-240 VAC
• Line Ranges
  • Line Voltage Full Regulation Range: 198-264 VAC
  • Line Frequency: 47–63 Hz
  • Max VA Nominal Line Voltage: 660 VA
  • Max Mains Current: 3.0 ARMS
  • Max Heat Dissipation 180 W
• Fuses
  • 6.3 A
• Fuses (2) – 5 mm x 20 mm
  • 6.3 A, 250 V fast blow

The post Covidien Valleylab FX8 Electrosurgical Unit appeared first on Auxo Medical.

The Force FX™ generator provides surgeons with the advantage of accurately delivering the selected power setting, even through resistant tissue. Instant Response technology provides surgeons with improved performance at lower power settings, minimizing the risk of tissue damage and neuromuscular stimulation, and decreasing the need to “turn up the generator.” The Force FX™ generator adjusts automatically, responding to tissue changes, maintaining power delivery, and minimizing drag. Capacitive coupling is reduced by 30-50% when using Instant Response™ technology. This reduction is achieved by limiting the RMS voltage and the high frequency harmonics.

Features:

• Instant Response™ technology ensures that the power delivered remains virtually constant, regardless of the tissue type
• Improved performance at lower power settings minimizes the risk of tissue damage and neuromuscular stimulation
• Three internal microcontrollers reduce system reaction time and increase the system’s processing speed
• Spray coagulation voltage of no more than 9000 volts peak-to-peak output for broad, but superficial coagulation with limited capacitive coupling
• A Power Efficiency Rating (PER) of approximately 98 for accurate and consistent cut performance
• Three cut modes, all controlled by Instant Response™ technology
• Four coag modes
• Three bipolar modes
• Versatile system that is uniquely compatible with other devices
• Compatible with, and the exclusive electrosurgical generator for, the Computer Motion Hermes™ Voice Command System
• Weight: < 8.1 kg (< 18 lbs)
• Dimensions: 11.1 cm(H) x 35.6 cm(W) x 43.9 cm(L)

The post Valleylab Force FX appeared first on Auxo Medical.

The post Universal Cart For ValleyLab ESUs appeared first on Auxo Medical.

The post Medtronic Covidien Valleylab Triad FT900 Cart appeared first on Auxo Medical.

The post Valleylab Force 2 – RENTAL appeared first on Auxo Medical.

The post Valleylab Force FX & Force FXC – RENTAL appeared first on Auxo Medical.

This full-power generator features Instant Response Technology which gives surgeons lower power settings to minimize the risk of tissue damage and neuromuscular stimulation. The Force FX-C adjust automatically to tissue changes, maintains power delivery and minimizes drag. The Force FX-C features three cut modes, four coag modes, and three bipolar modes.

Ultrasonic Electrosurgery: The Force FX-C generator works in conjunction with the Valleylab CUSA System 200 and CUSA EXcel for procedures where ultrasonic electrosurgery is desirable. When you connect a CUSA handpiece with CEM nosecone to the generator for ultrasonic electrosurgery, the generator limits the monopolar output power automatically

Features:

• Instant Response™ technology ensures that the power delivered remains virtually constant, regardless of the tissue type
• Improved performance at lower power settings minimizes the risk of tissue damage and neuromuscular stimulation
• Three internal microcontrollers reduce system reaction time and increase the system’s processing speed
• Spray coagulation voltage of no more than 9000 volts peak-to-peak output for broad, but superficial coagulation with limited capacitive coupling
• A Power Efficiency Rating (PER) of approximately 98 for accurate and consistent cut performance
• Three cut modes, all controlled by Instant Response™ technology
• Four coag modes
• Three bipolar modes
• Versatile system that is uniquely compatible with other devices
• Compatible with, and the exclusive electrosurgical generator for, the Computer Motion Her

Includes one monopolar foot pedal.

Optional Accessories:

• Bipolar foot (Additional cost) Part Number AM-E6009
• Universal Cart (AM-VALLAB-C)

The post Valleylab Force FX-C appeared first on Auxo Medical.

The ForceTriad™ energy platform is a full-featured electrosurgical system that provides electrosurgical cutting and coagulation, bipolar functionality, and vessel sealing in a single generator. The ForceTriad™ energy platform is the industry’s only full-featured energy platform with remote software upgrade capabilities.

Features:

• TissueFect™ sensing technology is a Covidien control system designed to precisely manage energy delivery
• Enhanced LigaSure™ tissue fusion technology permanently fuses vessels up to and including 7 mm, lymphatics, pulmonary vasculature and tissue bundles
• An optional bipolar resection with saline software application
• Automatic instrument recognition
• All-in-one unit is compatible with conventional electrosurgical instruments and all current and new LigaSure™ instruments
• Fusion cycles are faster than the original LigaSure™ vessel sealing generator
• Valleylab™ mode provides a unique combination of monopolar hemostatis and dissection
• PER of 98 in Cut
• Connects with RapidVac™ smoke evacuator
• Adaptive REM™ system
• Offers the surgeon a wide range of options
• Easy-to-use touch screen set up
• Reduces demands on staff during procedures
• Width: 18 in. (45.7 cm)
• Depth: 20 in. (50.8 cm)
• Height: 10 in. (25.4 cm)
• Weight: 30 lb. (13.6 kg)

The post Covidien Valleylab Force Triad appeared first on Auxo Medical.

• Quiet: The ValleyLab OptiMumm System allows you to effectively filter and remove surgical smoke without creating additional noise in the OR.
• ValleyLab RapidVac System: Synchronize the ValleyLab OptiMumm Smoke Evacuator with your electrosurgical generator, so the smoke evacuator will work automatically when the generator is activated.
• Efficient: The ValleyLab OptiMumm Smoke Evacuator is designed specifically for use with the ValleyLab AccuVac Smoke Evacuation attachment to effectively capture and filter smoke directly at the surgical site.
• Convenient: The ValleyLab OptiMumm System is designed with an easy to read front panel and a user-friendly interface. The ULPA and prefilter are easy to access and set up.
• Compact: The ValleyLab OptiMumm Smoke Evacuator integrates conveniently into the OR. The system fits directly on most Valleylab mounting carts, saving valuable OR space.
• User-Friendly: The filter life indicator is based on airflow, not just time, so you know when to replace the ULPA filter.

The post ValleyLab Force Optimumm Smoke Evacuator Unit appeared first on Auxo Medical.

The post Valleylab Force 2 appeared first on Auxo Medical.