Below is a sampling of the products you’ll find in our Featured category, along with common use cases and the types of facilities that benefit most from each solution.

Why our Featured medical equipment category is a smart place to start

Our Featured category is designed to highlight medical equipment that helps facilities move faster—whether you’re opening a new space, replacing a down unit, expanding service lines, or standardizing equipment across multiple rooms. You’ll find a mix of critical clinical equipment across sterile processing, exam rooms, operating rooms, patient monitoring, emergency response, and patient transport.

Because many Featured items are selected specifically for broad demand across healthcare environments, this category is a strong starting point for:

• Ambulatory surgery centers that need dependable OR and procedure room equipment
• Hospitals that need patient monitoring, transport, or emergency readiness coverage
• Clinics and specialty practices that need exam room uptime and workflow efficiency
• Sterile processing departments focused on consistent instrument reprocessing

Infusion therapy and medication delivery: pumps that support safe, consistent workflows

Infusion and syringe pump reliability impacts patient safety, nurse workload, and therapy consistency. If you’re outfitting an infusion area, updating inpatient capability, or supporting procedural sedation workflows, these Featured items are common go-tos.

• Medfusion 3500 V 3.0.6 Syringe Pump
  Great fit for: hospitals, outpatient infusion, anesthesia support areas, and specialty practices that rely on controlled syringe delivery.
  Typical use cases: medication administration where consistent syringe infusion performance and workflow-friendly setup matters.
• Abbott Plum A+ IV Infusion Pump, Single Channel
  Great fit for: med-surg floors, outpatient care environments, and treatment areas that need dependable infusion capability.
  Typical use cases: IV therapy delivery in clinical settings that value straightforward operation and repeatable processes.
• Baxa Repeater Pump
  Great fit for: pharmacy operations and compounding workflows in hospitals and infusion-focused environments.
  Typical use cases: supporting standardized fluid transfer tasks where accuracy and repeatability reduce staff burden.

Patient monitoring and vital signs: scalable coverage from spot checks to continuous monitoring

Monitoring needs vary by department. A pre-op area might need efficient vital signs capture, while perioperative and higher-acuity areas may need continuous monitoring with flexible parameter options. Our Featured selection includes options that work across the continuum of care.

• Edan IM70 Patient Monitor (Refurbished)
  Great fit for: general care environments, procedure areas, and facilities expanding monitoring capacity.
  Typical use cases: continuous bedside monitoring where staff need clear visibility and dependable performance.
• Mindray DPM5 Patient Monitor
  Great fit for: clinics, outpatient settings, and facilities that benefit from moving monitors between rooms.
  Typical use cases: flexible monitoring coverage in spaces that balance throughput with patient safety.
• Mindray Passport V with CO2
  Great fit for: perioperative environments, procedural areas, and care teams that want broader monitoring capability.
  Typical use cases: supporting patient monitoring workflows where capnography is clinically valuable.
• Mindray Passport 8 Patient Monitor with Sidestream EtCO2
  Great fit for: OR, PACU, and procedure-driven departments that prioritize strong monitoring capability.
  Typical use cases: continuous monitoring in procedural and perioperative environments.
• Welch Allyn Spot Vital Signs LXi Monitor
  Great fit for: primary care, urgent care, specialty clinics, and intake areas focused on fast vitals capture.
  Typical use cases: efficient spot-check vitals during triage, intake, and routine visits.
• Welch Allyn 6000 Series Vital Signs Monitor w/ CO2
  Great fit for: ambulatory care, surgery centers, and general care floors that want enhanced vitals monitoring.
  Typical use cases: standardized vital signs workflows where easy cleaning and clear display support busy teams.
• Welch Allyn Spot Vital Signs Model 420 NTB
  Great fit for: outpatient clinics and specialty practices that want quick, reliable vitals in a compact workflow.
  Typical use cases: routine vitals capture during visits, follow-ups, and screening workflows.

Cardiology diagnostics: ECG systems for screening, intake, and clinical decision support

ECG equipment often needs to work across multiple workflows—from routine screenings to pre-op evaluations. If you’re upgrading an older unit or adding capability to support patient throughput, these Featured options are worth a close look.

• GE MAC 5500 HD ECG
  Great fit for: hospitals, cardiology services, and facilities that need a strong resting ECG workflow.
  Typical use cases: structured ECG acquisition in clinical environments that value speed, clarity, and system integration potential.
• Mortara ELI 250 ECG Machine
  Great fit for: clinics, specialty practices, and facilities that benefit from a portable ECG workflow.
  Typical use cases: point-of-care ECG capture that supports fast clinical decisions in outpatient and intake environments.

Sterile processing and infection control: build a stronger instrument reprocessing line

Instrument reprocessing is a chain—cleaning, rinsing, drying, and sterilization all matter. When any link is weak, departments feel it as delays, rework, and risk. That’s why sterile processing equipment is one of the most impactful upgrades a facility can make.

• Steris Caviwave Single Chamber Ultrasonic Cleaner 15 Gal
  Great fit for: sterile processing departments, surgery centers, and instrument-heavy specialty clinics.
  Typical use cases: ultrasonic cleaning to improve soil removal prior to sterilization steps.
• Steris Caviwave Pro Single Chamber 17 GAL Ultrasonic Cleaner
  Great fit for: higher-throughput sterile processing environments with frequent instrument turnover.
  Typical use cases: consistent ultrasonic cleaning performance where workflow efficiency and repeatable outcomes matter.
• Steris Caviwave Rinsing and Drying Ultrasonic Cleaner
  Great fit for: sterile processing teams that want a more streamlined cleaning-to-drying workflow.
  Typical use cases: improving throughput while supporting high-quality instrument turnaround.
• Durasonic 4L Tabletop Ultrasonic Cleaner
  Great fit for: smaller clinics, specialty practices, and departments that need tabletop ultrasonic cleaning capability.
  Typical use cases: cleaning smaller loads efficiently without dedicating large-floor equipment space.
• Midmark Ritter M9 UltraClave (Autoclave), M9-022
  Great fit for: clinics and outpatient environments that need a trusted sterilization workhorse.
  Typical use cases: instrument sterilization supporting daily procedure schedules and quick turnovers.
• Tuttnauer 3870E Autoclave
  Great fit for: busy practices and departments with larger sterilization loads.
  Typical use cases: higher-capacity sterilization needs in clinical environments focused on steady throughput.
• Tuttnauer Elara 11 Autoclave
  Great fit for: facilities seeking advanced sterilization capability aligned with modern infection control priorities.
  Typical use cases: supporting instrument processing demands where cycle performance and consistency are key.

OR and procedure rooms: tables, lighting, positioning, and surgical energy

Procedure rooms and operating rooms run on coordination. The right combination of surgical tables, lighting, patient positioning, and clinical accessories helps teams stay efficient while supporting patient safety and comfort.

• Steris Amsco Model 3085 Surgical Table
  Great fit for: hospitals and surgery centers that need a versatile general surgical table.
  Typical use cases: supporting a range of surgical specialties where positioning flexibility is essential.
• Skytron 3600B Surgical Table
  Great fit for: OR environments that prioritize positioning capability and imaging access.
  Typical use cases: procedures where table design supports both clinician access and workflow needs.
• Steris LED385 Exam Light on Floor Stand
  Great fit for: exam rooms, procedure rooms, specialty clinics, and minor treatment spaces.
  Typical use cases: improving visualization for exams and in-office procedures without a ceiling-mount buildout.
• Steris Harmony Air M Series Dual Head LED Surgical Light
  Great fit for: operating rooms and procedure rooms where consistent illumination supports clinical precision.
  Typical use cases: surgical lighting needs where shadow management and bright field illumination matter.
• Allen Yellofin Lift-Assist Stirrups (OEM# O-YFASI)
  Great fit for: women’s health, urology, and surgical specialties that rely on consistent lower-extremity positioning.
  Typical use cases: procedures where ergonomic positioning and staff workflow are both critical.
• Valleylab Force FX ESU
  Great fit for: surgical environments and procedural specialties that depend on trusted electrosurgical energy delivery.
  Typical use cases: general surgery and specialty procedures that require consistent surgical energy performance.

Exam rooms and patient access: modernize comfort, accessibility, and clinician workflow

Exam room equipment shapes patient experience and staff efficiency. If you’re building new rooms, renovating, or upgrading to improve accessibility, these Featured solutions help create a more functional point of care.

• Midmark 623 Exam Table
  Great fit for: primary care, specialty clinics, and facilities improving patient access.
  Typical use cases: exams where barrier-free access supports patients with mobility challenges.
• Midmark 626 Exam Table
  Great fit for: high-throughput clinics and exam rooms that want dependable, clinician-friendly workflows.
  Typical use cases: day-to-day exams where positioning efficiency supports schedule density.
• Midmark 630 Barrier-Free Power Procedure Table
  Great fit for: procedure-focused clinics and outpatient specialties that need powered positioning flexibility.
  Typical use cases: in-office procedures where precise positioning supports both patient comfort and clinician access.
• Midmark 641 Procedure Chair
  Great fit for: outpatient procedures, specialty practices, and departments prioritizing patient access.
  Typical use cases: procedures where multi-position capability supports efficient care delivery.
• Midmark Ritter 75L Exam Chair
  Great fit for: specialty clinics and multi-use exam environments.
  Typical use cases: exams and minor procedures where adjustable positioning supports consistent workflow.

Imaging and airway management: capability that supports critical moments

Some equipment categories are “day-to-day.” Others are “when it matters most.” Imaging and airway tools often fall into the second group—especially in procedure-heavy settings, emergency workflows, and airway management scenarios.

• OEC 9800 C-Arm, 9” C-arm with GSP & Flat Panel Upgrade
  Great fit for: surgery centers and hospitals performing orthopedic, pain management, spine, and general surgical imaging workflows.
  Typical use cases: mobile fluoroscopy support during procedures where imaging guidance improves precision.
• Verathon GlideScope Monitor with Baton
  Great fit for: anesthesia teams, emergency departments, ICUs, and procedure areas that prioritize airway visibility.
  Typical use cases: airway management where visualization supports confident placement and training consistency.

Emergency readiness and patient transport: stretchers, gurneys, stair chairs, AEDs, and defibrillators

From patient movement to cardiac response, readiness equipment protects patients and reduces staff strain. If you’re equipping an ED, adding inpatient transport capacity, or strengthening first-response coverage, these Featured products support the front lines.

• Philips Heartstart FRX AED w/ Wall Mount Box
  Great fit for: clinics, outpatient centers, facilities management teams, and any care environment building AED coverage.
  Typical use cases: fast-access defibrillation capability for public and clinical spaces.
• Physio-Control Lifepak 20E Defibrillator
  Great fit for: hospitals and in-facility responder teams that need defibrillation and monitoring capability.
  Typical use cases: emergency response workflows where time, usability, and reliability matter.
• Stryker MX Pro 6080 Emergency Gurney
  Great fit for: emergency departments, transport teams, and high-traffic patient movement environments.
  Typical use cases: rapid patient transport where durable construction supports frequent daily use.
• Stryker 1115 Prime Big Wheel Stretcher
  Great fit for: hospitals and departments moving patients across longer corridors and busy units.
  Typical use cases: transport workflows where maneuverability and patient comfort support better moves.
• Mac PT-1000 Transport Stretcher (Refurbished)
  Great fit for: cost-conscious facilities that still require dependable transport capability.
  Typical use cases: general patient transfer across departments and care areas.
• Pedigo 5400 W Stretcher, Side Brake Only
  Great fit for: hospitals and procedural environments that want a practical stretcher option for multiple areas.
  Typical use cases: supporting patient movement between departments such as perioperative areas and recovery spaces.
• Stryker 5050 Stretcher Chair
  Great fit for: surgery centers and compact clinical spaces that need flexible positioning.
  Typical use cases: converting between transport and seated workflows without changing equipment.
• Stryker Stair-PRO Stair Chair
  Great fit for: EMS, transport teams, and facilities that manage stairs during patient movement.
  Typical use cases: safer patient movement on stairs while reducing caregiver strain.
• Arizant 775 Bair Hugger
  Great fit for: perioperative environments and recovery areas focused on patient comfort.
  Typical use cases: warming support in pre-op, OR, and recovery workflows.

Orthopedic workflow support: tools that keep patient flow moving

In orthopedic and cast room environments, speed and cleanup matter—especially when patient volume spikes. This Featured option supports efficient cast removal workflows.

• Stryker Cast Saw with Vacuum
  Great fit for: orthopedic clinics, sports medicine, urgent care, and hospital ortho departments.
  Typical use cases: cast removal workflows where integrated suction supports cleaner, faster room turnover.

How to choose the right Featured equipment for your facility

If you’re comparing options in our Featured category, here are practical selection criteria we recommend using so you get equipment that fits your workflow—not just your budget:

• Care setting: outpatient clinics and high-acuity units often need different monitoring, transport, and procedure capabilities.
• Throughput and staffing: higher volume environments benefit from equipment that reduces steps and speeds room turnover.
• Room constraints: footprints, mounting needs, and power considerations can make or break a smooth installation.
• Standardization goals: aligning models across rooms can simplify training, maintenance, and parts planning.
• Serviceability: plan for preventative maintenance and long-term uptime—especially for sterile processing and perioperative equipment.

When you’re ready, start with our Featured medical equipment collection and click into any product page to request a quote or purchase (depending on the item). If you want to standardize a room buildout—OR, SPD, clinic exam rooms, or transport—we can help you map the right combination of equipment for your space and workflow.

The post Featured Medical Equipment from Auxo Medical: Solutions for Surgery Centers, Clinics, Hospitals, and Sterile Processing appeared first on Auxo Medical.

The Cost of an Aging Sterilizer

An outdated sterilizer is more than an inconvenience. Older units often suffer from:

• Increased downtime due to frequent breakdowns and hard-to-find replacement parts
• Inconsistent cycle performance that may fail to meet ANSI/AAMI standards
• Higher operating costs from inefficient energy use and repeated service calls
• Compliance risks that can result in failed inspections or compromised instrument processing

If any of these sound familiar, upgrading to a reliable, refurbished Steris sterilizer is a cost-effective path forward.

Why Steris?

Steris is a global leader in sterilization and infection control technology. Their steam sterilizers are engineered for high-volume processing, intuitive operation, and long-term durability. With advanced microcomputer controls, multiple programmable cycles, and robust construction, Steris units are trusted by healthcare facilities worldwide to deliver consistent, compliant sterilization every time.

Our In-Stock Steris Sterilizers—Available in Almost Every Size

We maintain a broad inventory of refurbished Steris sterilizers, each thoroughly tested and restored to ensure optimal performance. Whether you need a compact unit for a small surgical center or a large-capacity sterilizer for a busy hospital SPD, we have you covered.

Small Chamber (16″)

Steris Amsco 400 Series 16″ Sterilizer A reliable solution for facilities with moderate sterilization volumes. This unit features a 16″ x 16″ x 26″ chamber with pre-vacuum and gravity cycle options, making it ideal for processing standard surgical instrument loads efficiently.

Steris V116 Steam Sterilizer Designed for fast, efficient sterilization of heat- and moisture-stable materials. The V116 pre-vacuum sterilizer is equipped with pre-vac, gravity, flash, express, leak test, and daily air removal test cycles—offering the same capabilities as a gravity sterilizer with the added benefits of pre-vacuum technology.

Medium Chamber (20″)

Steris Amsco 400 Series 20″ Sterilizer Featuring a spacious 20″ x 20″ x 38″ chamber, this sterilizer accommodates a rack and two-shelf loading system to maximize throughput. A single, foot-pedal actuated vertical power door simplifies loading and unloading for efficient operation.

Steris Amsco C-Series 20″ Sterilizer An advanced solution tailored for today’s operating rooms and hospital environments. With a 20″ x 20″ x 38″ chamber and multiple programmable cycles, this sterilizer handles a wide range of sterilization needs with precision and speed.

Large Chamber (26″ x 37.5″ x 48″)

Steris Amsco Century V148 Steam Sterilizer Built for high-volume facilities, the V148 features a generous 26″ x 37.5″ x 48″ chamber that accommodates large and complex instrument loads. Equipped with pre-vac, gravity, flash, express, leak test, and daily air removal test cycles, it delivers fast, thorough sterilization of heat- and water-resistant materials.

Steris Amsco 400 Series 48″ House Steam Sterilizer (Recessed) Engineered for maximum capacity, this recessed-mount sterilizer features a 26″ x 37.5″ x 48″ chamber optimized for processing larger loads. Its recessed design integrates seamlessly into your sterile processing department for a clean, efficient workflow.

Why Upgrade with Auxo Medical?

• Quality-assured refurbished equipment — Every unit we sell is professionally remanufactured and rigorously tested to meet original performance specifications.
• Cost-effective solutions — Get reliable Steris performance at a fraction of the cost of buying new.
• Expert consultation — Our knowledgeable team will help you select the right size and configuration for your facility’s specific needs.
• Comprehensive maintenance and repair services — We keep your equipment running at peak efficiency long after the sale.
• Fast delivery and installation — We minimize your downtime so you can stay compliant and operational.

Don’t Wait for the Next Breakdown

Every failed sterilization cycle is a risk to your patients and your schedule. If your current sterilizer is showing its age, now is the time to act. With in-stock Steris models ranging from compact 16″ chambers to large 48″ units, we have the right solution ready to ship.

Contact Auxo Medical today to discuss your sterilization needs, request a quote, or schedule a consultation. Let us help you upgrade to dependable Steris performance—before your next cycle fails.

The post Is Your Sterilizer Old? Does It Fail Frequently? Upgrade Your Unit Now with In-Stock Steris Models of Almost Every Size. appeared first on Auxo Medical.

Comprehensive Sterile Processing Equipment Services

We provide service, preventative maintenance, and repair solutions on a wide range of sterile processing equipment including:

• Autoclaves and Large Sterilizers
• Washer Disinfectors (including glassware washers)
• Ultrasonic Cleaners
• Steam Generators and Boilers

Our technicians are experienced with many leading brands such as Steris, Amsco, V-Pro, Getinge, Midmark, Ritter, Tuttnauer, SciCan, Primus Spire, Scientek, Consolidated, Sharpertek, Belimed, BetaStar, Miele, Basil, Lancer, and more.

Why Choose Auxo Medical for Sterile Processing Equipment Maintenance?

Certified Parts and Equipment On Hand

Our technicians always travel equipped with all necessary preventative maintenance parts and most parts needed for emergency repairs. This reduces downtime and avoids costly multiple service visits.

Precision Calibrations with Certified Thermocouples

Accurate temperature readings are vital for effective sterilization. We use only current, certified thermocouples for all calibrations, ensuring your equipment consistently meets the highest sterilization standards.

Water Quality Testing for Optimal Performance

Water impurities can cause scale buildup, corrosion, and compromised sterilization results. We offer comprehensive water quality testing to identify issues and recommend solutions to keep your sterilizers and autoclaves running efficiently.

24/7 Emergency Repair Services

Sterile processing equipment breakdowns can disrupt your entire facility. That’s why we provide 24/7 emergency service, 365 days a year. Whether it’s a late-night alarm or weekend malfunction, our expert technicians respond quickly to minimize disruptions.

Note: After-hours service calls carry a 4-hour minimum labor charge (4:30 pm to 8 am).

Preventative Maintenance Plans to Ensure Reliability

Our preventative maintenance programs are designed to keep your sterile processing equipment operating at peak performance with minimal downtime. Regular maintenance includes inspection, calibration, cleaning, and replacement of worn components to prevent unexpected failures.

Repair Services for Common Issues

If your sterilizer or autoclave is showing cycle errors or alarms, it’s critical to address them promptly to maintain effective sterilization. Auxo Medical offers expert repair services for sterilizers, autoclaves, washer disinfectors, steam generators, and boilers. We also provide loaner and rental tabletop autoclaves upon request, helping you stay operational during repairs (fees may apply).

Access to Full Documentation via Service Portal

Active service clients have access to our Service Portal where you can find:

• Calibration certificates
• Maintenance logs
• Repair reports

The portal also allows scheduling maintenance and repair calls, helping you stay compliant with regulatory requirements with ease.

Field Service Areas We Cover for Central Sterile Equipment

We provide sterile processing equipment maintenance and repair services across:

• Virginia
• Maryland & Washington, D.C.
• North Carolina
• South Carolina
• Tennessee (Chattanooga & Knoxville)
• Michigan (Grand Rapids)
• Kentucky (Lexington)
• Florida (Central Florida, Tampa)
• Georgia (Atlanta)
• Ohio (Central & Western Ohio)

Trusted by Healthcare Professionals

Our customers appreciate our responsiveness, expertise, and personalized service:

“Auxo Medical has been a true partner, working diligently to resolve issues and keep our sterilizers online.” – Darcy A., Manager Biomedical Engineering

“They provide exceptional customer service and education to our staff on sterilization equipment.” – Carolyn H., Sterile Processing & Distribution Manager

“Their scheduled maintenance program drastically reduced our downtime with lightning-fast repairs.” – Director of Operations

Get Your Sterile Processing Equipment Maintenance or Repair Quote

Ready to ensure your sterile processing equipment stays reliable and compliant? Contact us by filling out the service quote/repair request form below or call toll-free at (888) 728-8448.

Service Quote / Repair Request

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Zip Code *

Phone Number *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

The post Sterilizer, Autoclave, Washer Disinfector and Steam Generator Preventative Maintenance & Repair appeared first on Auxo Medical.

Our Medical Equipment Catalog includes a variety of autoclaves, from tabletop models to large-capacity sterilizers, suitable for hospitals, dental offices, and laboratories. Each autoclave is rigorously tested and certified to meet industry standards, ensuring reliable performance.

Why choose Auxo Medical for your autoclave purchase?

• Expert Guidance: Our sales team will help you select the right autoclave for your needs.
• Cost-Effective Options: Save with refurbished models that perform like new.
• Maintenance Services: We offer preventative maintenance plans to extend the lifespan of your equipment.
• Quick Shipping: Many of our autoclaves are in stock and ready for immediate delivery.

Don’t compromise on quality or efficiency—buy your autoclave from Auxo Medical. Visit our Medical Equipment Catalog to explore our selection or contact us for personalized assistance.

The post Where Can I Buy an Autoclave? appeared first on Auxo Medical.

Tuttnauer Autoclaves

1. Tuttnauer T-TOP 10S Gravity Autoclave

The Tuttnauer T-TOP 10S Gravity Autoclave stands out for its robust reliability and user-friendly design. Ideal for small clinics and laboratories, this model uses gravity displacement technology to ensure effective sterilization. It’s perfect for facilities seeking dependable performance in a compact unit.

2. Tuttnauer LABSCI Series

• LABSCI 85LV Vertical Autoclave: This top-loading autoclave is designed for educational and research institutions. With an 85-liter chamber, it maximizes sterilization efficiency.
• LABSCI 60LV Vertical Autoclave: Part of the T-Lab ECO line, this model offers economic and efficient sterilization for various materials.
• LABSCI15L+ Benchtop Autoclave: Providing a generous chamber volume, this versatile autoclave is suited for sterilizing a wide range of laboratory materials.
• LABSCI11L Benchtop Autoclave: Known for its convenience and versatility, this model is essential for any lab environment.

3. Tuttnauer 3870 Series

• 3870HSG-WS Pre/Post Vacuum Autoclave: With an 85-liter capacity, this autoclave delivers hospital-grade sterilization at a cost-effective price.
• 3870E Autoclave: Featuring automatic digital control, this model includes a 60-minute timer and a low water-level alarm for enhanced safety and efficiency.
• 3870EA Autoclave Gen 2: Updated with advanced features, this model includes two instrument trays and a high-efficiency drying system.

4. Tuttnauer T-Edge Series

• T-Edge 11S Gravity Autoclave: Offers fast cycles and optimal chamber capacity, providing convenience with its open-door loading design.
• T-Edge 11B Pre Post Vacuum Autoclave: Similar to the 11S, but with pre-and post-vacuum capabilities for enhanced sterilization.

Tuttnauer Steam Distillers

1. Tuttnauer DS1000 and DS1G Steam Distillers

• DS1000 Steam Distiller: Converts tap water into pure distilled water, essential for laboratory and industrial applications.
• DS1G Steam Distiller: Capable of producing 4 liters of distilled water per hour, ensuring high water purity for sensitive applications.

Tuttnauer Lab Washers

1. Tuttnauer TIVA 10 Lab Washer

Available in configurations with automatic or manual doors, the TIVA 10 Lab Washer offers a 265-liter capacity. It ensures comprehensive cleaning and disinfection, making it indispensable for surgical and sterilization departments.

2. Tuttnauer TIVA 2 Washer Disinfector

Designed for undercounter installation, the TIVA 2 provides efficient cleaning and disinfection in a compact form. With a 65-liter chamber, it’s ideal for dental and medical practices focusing on instrument sterilization.

Tuttnauer Hydrogen Peroxide Sterilizers

1. Tuttnauer Plazmax Series

• Plazmax 110 and P50 Sterilizers: Utilize hydrogen peroxide vapor and plasma to inactivate microorganisms. These sterilizers are crucial for ensuring the sterility of medical devices through an advanced diffusion process.

Tuttnauer Manual and Quick Cycle Autoclaves

1. Tuttnauer 2540M and 2340M Manual Autoclaves

These manual autoclaves are designed for clinics and veterinary practices that prefer analog controls. They provide reliable sterilization without compromising on safety or quality.

2. Tuttnauer Kwiklave Models

• 2540MK and 3870M: Known for quick cycle times, these models reduce heat-up time while maintaining the trusted features of manual autoclaves.

Additional Tuttnauer Products

1. Tuttnauer EZ Series

• EZ10 and EZ11 PLUS: These fully automatic autoclaves offer pre-programmed cycles and closed-door drying, making them ideal for busy medical environments.

2. Tuttnauer Elara 11 Autoclave

With state-of-the-art technology, the Elara 11 provides reliable sterilization and infection control, suitable for a diverse range of medical settings.

Why Choose Tuttnauer from Auxo Medical?

Auxo Medical not only provides top-tier Tuttnauer equipment but also offers comprehensive support services. From sales consultations and financing options to maintenance and repair services, Auxo Medical ensures that your facility is equipped with the best tools for effective sterilization and infection control.

Service and Support

Auxo Medical’s dedicated service areas include Atlanta, Central Florida, Dayton, and more, ensuring prompt support and maintenance for your Tuttnauer equipment. With a focus on reliability and customer satisfaction, Auxo Medical is your trusted partner in medical equipment solutions.

Purchase Tuttnauer Sterilization Equipment from Auxo Medical

Tuttnauer’s range of autoclaves, steam distillers, lab washers, and sterilizers available at Auxo Medical provides unmatched reliability and efficiency for healthcare and laboratory settings. With comprehensive service and support from Auxo Medical, investing in Tuttnauer equipment means investing in quality and peace of mind. View and request a quote from our Tuttnauer catalog below.

The post Tuttnauer Equipment Available at Auxo Medical appeared first on Auxo Medical.

Sterilizer Equipment Sales

At Auxo Medical, we offer a wide range of sterilizer equipment for sale, including autoclaves, dry heat sterilizers, and ethylene oxide sterilizers. Our equipment is designed to meet the unique needs of healthcare facilities, including hospitals, clinics, and surgical centers. We work with the leading manufacturers in the industry to provide our clients with the latest technology and advancements in sterilization equipment. That’s why we offer a comprehensive selection of autoclaves and sterilizers from leading brands like Steris, Tuttnauer, Skytron, and more.

Whether you’re looking for a reliable autoclave for your laboratory or a high-capacity sterilizer for a busy surgical suite, we have the perfect solution for your needs.

Autoclaves:

Autoclaves are essential for sterilizing medical instruments and equipment using steam under pressure. This method effectively eliminates bacteria, viruses, and spores, ensuring the safety of patients and staff.

We offer a wide range of autoclaves, including:

• Gravity Displacement Autoclaves: These are the most basic type of autoclave, relying on gravity to displace air with steam. They are suitable for smaller facilities and labs.
• Pre-Vacuum Autoclaves: These autoclaves use a vacuum to remove air from the chamber before steam is introduced, ensuring faster and more efficient sterilization. They are ideal for larger facilities and surgical suites.
• Benchtop Autoclaves: These compact autoclaves are perfect for smaller labs and clinics, offering a convenient and efficient sterilization solution.

Sterilizers

While autoclaves are the most common method for sterilization, we also offer a variety of sterilizers that utilize different technologies:

• Dry Heat Sterilizers: These sterilizers use dry heat to eliminate microorganisms. They are particularly suitable for sterilizing instruments that cannot withstand steam, such as sharp instruments or powders.
• Hydrogen Peroxide Sterilizers: These sterilizers use hydrogen peroxide vapor and plasma to sterilize medical devices. They are a safe and effective alternative to traditional methods, especially for sensitive instruments.

Why Choose Auxo Medical?

We are committed to providing our clients with the highest quality medical equipment and exceptional service. Here’s what sets us apart:

• Wide Selection: We offer a wide range of autoclaves and sterilizers to meet the specific needs of any medical facility.
• Trusted Brands: We partner with industry-leading manufacturers like Steris, Tuttnauer, and Skytron, ensuring you receive reliable and high-performing equipment.
• Refurbished and New Options: We offer both refurbished and new equipment, providing flexibility and affordability.
• Expert Support: Our team of experienced professionals is available to answer your questions and provide guidance on choosing the right sterilization solution for your facility.

Maintenance Services

At Auxo Medical, we understand that sterilizer equipment requires regular maintenance to ensure optimal performance and safety. Our team of certified technicians provides routine maintenance services to ensure that your equipment is running efficiently and effectively. We offer a variety of maintenance plans to fit your needs and budget, including routine inspections, repairs, and replacement of parts.

Our maintenance services include:

• Routine inspections to ensure that your equipment is in good working condition
• Repair services to address any issues or malfunctions
• Replacement of parts to keep your equipment running efficiently
• Training and education for your staff on proper usage and maintenance

Repair Services

At Auxo Medical, we understand that equipment malfunctions can occur unexpectedly. Our team of certified technicians is available to provide repair services when you need them. We offer quick and efficient repair services to minimize downtime and ensure that your equipment is back in operation as soon as possible.

Our repair services include:

• Emergency repairs for equipment failures
• Scheduled repairs for routine maintenance
• Troubleshooting to identify and address issues
• Parts replacement to ensure optimal performance

Why Choose Auxo Medical?

At Auxo Medical, we are committed to providing our clients with the highest level of quality and safety. Our team of experts has years of experience in the healthcare industry, and we are dedicated to ensuring that our clients receive the best possible service.

Here are a few reasons why you should choose Auxo Medical for your sterilizer equipment sales, maintenance, and repair services:

• We offer a comprehensive range of sterilizer equipment from leading manufacturers
• Our team of certified technicians provides routine maintenance and repair services
• We offer customized maintenance plans to fit your needs and budget
• We provide training and education for your staff on proper usage and maintenance
• We are committed to providing the highest level of quality and safety

Contact Auxo Medical for all Your Sterilizer Needs

At Auxo Medical, we are dedicated to providing our clients with the highest level of quality and safety in sterilizer equipment sales, maintenance, and repair services. Our team of experts is committed to ensuring that your equipment is running efficiently and effectively, and that your staff is trained on proper usage and maintenance. Contact us today to learn more about our comprehensive sterilizer equipment sales, maintenance, and repair services.

Contact Us

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Phone Number *

Zip Code *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

The post Sterilizer Equipment Sales, Preventative Maintenance and Repair Services at Auxo Medical appeared first on Auxo Medical.

The Importance of Preventative Maintenance

Preventative maintenance plays a crucial role in ensuring the longevity and performance of sterilizers, autoclaves, washer disinfectors, ultrasonic cleaners, and steam generators. By implementing a proactive maintenance plan, medical facilities can avoid costly breakdowns, reduce downtime, and maintain compliance with regulatory standards. Auxo Medical understands the criticality of preventative maintenance and offers comprehensive services to keep these devices in optimal condition.

Preventative Maintenance Services Offered by Auxo Medical

1. Sterilizer Maintenance and Repair
   • Auxo Medical provides regular inspections and maintenance for sterilizers, including checking the seals, valves, and pressure gauges for proper functioning.
   • The company also offers repair services for any issues identified during the maintenance process, ensuring that the sterilizers are back in operation quickly.
2. Autoclave Maintenance and Repair
   • Auxo Medical’s team of experienced technicians conducts thorough inspections of autoclaves, focusing on critical components such as the heating elements, pressure sensors, and safety mechanisms.
   • Any necessary repairs or replacements are carried out promptly to prevent any disruption to the autoclave’s functionality.
3. Washer Disinfector Maintenance and Repair
   • Auxo Medical understands the importance of washer disinfectors in cleaning and disinfecting medical instruments. Our maintenance services include inspecting and cleaning the spray arms, filters, and detergent dispensers.
   • In case of any malfunctions or issues, Auxo Medical’s technicians are well-equipped to provide timely repairs and replacements.
4. Ultrasonic Cleaner Maintenance and Repair
   • Ultrasonic cleaners are widely used in medical facilities for efficient and thorough cleaning of delicate instruments. Auxo Medical offers comprehensive maintenance services for ultrasonic cleaners, including checking the transducers, heaters, and timers.
   • If any components require repair or replacement, Auxo Medical ensures that the ultrasonic cleaner is restored to its optimal working condition.
5. Steam Generator Maintenance and Repair
   • Steam generators are essential for providing the steam required for sterilization processes. Auxo Medical’s preventative maintenance services for steam generators involve inspecting and cleaning the heating elements, water level sensors, and safety valves.
   • The company’s technicians are trained to identify and resolve any issues promptly, ensuring the uninterrupted operation of the steam generator.

Benefits of Choosing Auxo Medical for Preventative Maintenance and Repair

1. Expertise and Experience
   • Auxo Medical has a team of highly skilled technicians with extensive experience in maintaining and repairing sterilizers, autoclaves, washer disinfectors, ultrasonic cleaners, and steam generators.
   • Our expertise ensures that the devices are serviced according to industry standards, maximizing their efficiency and lifespan.
2. Timely and Reliable Service
   • Auxo Medical understands the importance of minimal downtime in medical facilities. They prioritize timely service delivery, ensuring that any maintenance or repair work is completed efficiently.
   • Our reliable service helps medical facilities maintain their operations without interruptions, ensuring the safety of patients and staff.
3. Compliance with Regulatory Standards
   • Medical facilities must adhere to strict regulatory standards regarding sterilization and cleanliness. Auxo Medical’s preventative maintenance services help facilities stay compliant with these regulations, avoiding any potential penalties or legal issues.
4. Cost Savings
   • Regular preventative maintenance can help identify and address minor issues before they escalate into major problems. By partnering with Auxo Medical, medical facilities can save on costly repairs and replacements in the long run.
   • Additionally, well-maintained devices operate more efficiently, resulting in energy savings and reduced utility costs.
5. Customized Maintenance Plans
   • Auxo Medical understands that different medical facilities have unique requirements. They offer customized maintenance plans tailored to the specific needs of each facility.
   • These plans ensure that all critical components of sterilizers, autoclaves, washer disinfectors, ultrasonic cleaners, and steam generators are inspected and maintained regularly,ensuring optimal performance and minimizing the risk of equipment failure.

FAQ (Frequently Asked Questions)

1. Why is preventative maintenance important for medical equipment?

Preventative maintenance is crucial for medical equipment as it helps identify and address potential issues before they escalate into major problems. Regular maintenance ensures that the equipment operates efficiently, reduces downtime, and extends its lifespan.

2. How often should sterilizers, autoclaves, washer disinfectors, ultrasonic cleaners, and steam generators be serviced?

The frequency of servicing depends on various factors such as the usage intensity and manufacturer recommendations. However, it is generally recommended to have these devices serviced at least once a year to ensure optimal performance.

3. What are the consequences of not performing regular maintenance on medical equipment?

Neglecting regular maintenance can lead to equipment breakdowns, increased downtime, compromised sterilization processes, and potential safety risks for patients and staff. It can also result in costly repairs or the need for premature equipment replacements.

4. Can I perform maintenance on medical equipment myself?

While basic cleaning and maintenance tasks can be performed by facility staff, it is highly recommended to have professional technicians conduct comprehensive maintenance. They have the expertise, tools, and knowledge to identify and address potential issues effectively.

5. How can I schedule preventative maintenance with Auxo Medical?

To schedule preventative maintenance with Auxo Medical, simply contact our customer service team through our website or by phone at (888) 728-8448. Our tean will assist you in setting up a maintenance plan tailored to your facility’s specific needs and schedule.

Field Service Areas

Auxo Medical proudly serves the following areas in addition to Lexington, Kentucky:

• Frankfort
• Somerset
• Louisville
• Cincinnati, OH

Auxo Medical’s field service technicians are available to provide preventative maintenance and repair services in these areas and the surrounding regions.

Contact Auxo Medical as Your Preventative Maintenance Provider and Emergency Repair Technicians in Kentucky

Preventative maintenance is vital for ensuring the optimal performance and longevity of sterilizers, autoclaves, washer disinfectors, ultrasonic cleaners, and steam generators in medical facilities. Auxo Medical offers comprehensive maintenance and repair services, backed by our expertise, timely service, and commitment to regulatory compliance. By partnering with Auxo Medical, healthcare and laboratory facilities in Lexington, Frankfort, Somerset, Louisville, Cincinnati, and the surrounding areas can ensure the safety and efficiency of their sterile processing equipment. Contact Auxo Medical today to schedule your preventative maintenance or emergency repair and experience the benefits of our professional services.

The post Autoclave & Sterile Processing Equipment Maintenance and Repair in Kentucky appeared first on Auxo Medical.

Introduction

In the healthcare industry, ensuring the safety and efficacy of medical equipment is of utmost importance. Sterilizers and autoclaves play a critical role in preventing the spread of infections and maintaining a sterile environment in healthcare facilities. To ensure the proper functioning of these devices, it is essential to implement regular preventative maintenance measures. In this article, we will explore the importance of sterilizer and autoclave preventative maintenance as required by the Centers for Disease Control and Prevention (CDC), the Joint Commission, and the Centers for Medicare and Medicaid Services (CMS).

The Significance of Sterilizer and Autoclave Preventative Maintenance

Sterilizers and autoclaves are used to eliminate microorganisms from medical instruments, equipment, and supplies. They are vital in preventing the transmission of infections and ensuring patient safety. However, like any other equipment, sterilizers and autoclaves require regular maintenance to operate at their optimal level. Preventative maintenance not only helps identify and address potential issues before they become major problems but also extends the lifespan of the equipment and reduces the risk of equipment failure.

CDC Guidelines for Sterilizer and Autoclave Preventative Maintenance

The CDC provides guidelines for healthcare facilities to follow when it comes to sterilizer and autoclave preventative maintenance. These guidelines aim to ensure that these devices are functioning properly and effectively. Some key recommendations include:

1. Regular Inspection: Healthcare facilities should conduct routine inspections of sterilizers and autoclaves to check for any visible signs of damage or wear. This includes inspecting seals, gaskets, filters, and other components for signs of deterioration.
2. Cleaning and Decontamination: Sterilizers and autoclaves should be thoroughly cleaned and decontaminated according to manufacturer instructions. This helps remove any residue or buildup that may affect the sterilization process.
3. Calibration and Testing: Regular calibration and testing of sterilizers and autoclaves are essential to ensure accurate temperature and pressure readings. This helps maintain the effectiveness of the sterilization process.
4. Documentation: Proper documentation of all maintenance activities is crucial. This includes recording inspection results, cleaning and decontamination procedures, calibration and testing records, and any repairs or replacements performed.

By adhering to these guidelines, healthcare facilities can ensure that their sterilizers and autoclaves are operating as intended and meet the necessary standards for infection control.

Joint Commission Requirements for Sterilizer and Autoclave Preventative Maintenance

The Joint Commission, an independent, nonprofit organization that accredits and certifies healthcare organizations, also emphasizes the importance of sterilizer and autoclave preventative maintenance. As part of their accreditation process, the Joint Commission requires healthcare facilities to have a comprehensive maintenance program in place for all critical equipment, including sterilizers and autoclaves.

Key requirements set forth by the Joint Commission include:

1. Written Maintenance Program: Healthcare facilities must have a written maintenance program that outlines the specific procedures and schedules for sterilizer and autoclave maintenance. This program should include regular inspections, cleaning protocols, calibration procedures, and documentation practices.
2. Staff Training: Healthcare facilities must ensure that staff members responsible for sterilizer and autoclave maintenance are properly trained and competent in performing the necessary maintenance tasks. Training should cover equipment operation, maintenance procedures, and safety protocols.
3. Equipment Performance Monitoring: Regular monitoring of sterilizer and autoclave performance is essential to identify any deviations from expected standards. This may involve monitoring temperature and pressure readings, as well as conducting biological indicator tests to verify the effectiveness of the sterilization process.
4. Documentation and Record-Keeping: Similar to the CDC guidelines, the Joint Commission requires healthcare facilities to maintain detailed records of all sterilizer and autoclave maintenance activities. This includes inspection reports, cleaning and calibration records, staff training documentation, and any repairs or replacements performed.

By meeting the requirements set forth by the Joint Commission, healthcare facilities can demonstrate their commitment to maintaining high standards of equipment maintenance and patient safety.

CMS Regulations for Sterilizer and Autoclave Preventative Maintenance

The Centers for Medicare and Medicaid Services (CMS) also play a role in ensuring the proper maintenance of sterilizers and autoclaves in healthcare facilities. CMS regulations require healthcare facilities to meet certain standards to participate in Medicare and Medicaid programs.

Key CMS regulations related to sterilizer and autoclave preventative maintenance include:

1. Condition of Participation: Healthcare facilities must comply with the CMS Conditions of Participation, which include requirements for equipment maintenance. This ensures that healthcare facilities maintain a safe and effective environment for patient care.
2. Survey and Certification Process: CMS conducts periodic surveys and certifications to assess healthcare facilities’ compliance with regulations. During these surveys, the maintenance and performance of sterilizers and autoclaves are evaluated to ensure they meet the necessary standards.
3. QualityAssurance and Performance Improvement: CMS encourages healthcare facilities to implement quality assurance and performance improvement programs that include regular monitoring and evaluation of sterilizer and autoclave maintenance. This helps identify areas for improvement and ensures ongoing compliance with CMS regulations.
4. Prompt Response to Deficiencies: In the event that deficiencies are identified during CMS surveys or inspections, healthcare facilities must take prompt action to address and correct these issues. This may involve implementing corrective measures, conducting additional training, or seeking necessary repairs or replacements.

By adhering to CMS regulations, healthcare facilities can maintain their eligibility to participate in Medicare and Medicaid programs and demonstrate their commitment to providing safe and effective patient care.

Frequently Asked Questions (FAQ)

1. Why is preventative maintenance important for sterilizers and autoclaves?

Preventative maintenance is important for sterilizers and autoclaves to ensure their proper functioning, prevent equipment failure, and maintain a sterile environment in healthcare facilities. Regular maintenance helps identify and address potential issues before they become major problems, extends the lifespan of the equipment, and reduces the risk of infections.

2. How often should sterilizers and autoclaves be inspected?

Sterilizers and autoclaves should be inspected regularly, as recommended by the manufacturer and in accordance with CDC guidelines. This may vary depending on the specific model and usage, but typically inspections are conducted on a monthly or quarterly basis.

3. What are the consequences of not performing preventative maintenance on sterilizers and autoclaves?

Failure to perform preventative maintenance on sterilizers and autoclaves can lead to equipment malfunction, compromised sterilization effectiveness, increased risk of infections, and potential non-compliance with regulatory requirements. It can also result in costly repairs or the need for premature equipment replacement.

4. Can healthcare facilities perform sterilizer and autoclave maintenance in-house, or should they hire external service providers?

Healthcare facilities can choose to perform sterilizer and autoclave maintenance in-house if they have the necessary expertise and resources. However, it is important to ensure that staff members responsible for maintenance are properly trained and competent. Alternatively, healthcare facilities can hire external service providers who specialize in equipment maintenance to ensure compliance with guidelines and regulations.

5. How can healthcare facilities ensure proper documentation of sterilizer and autoclave maintenance?

Healthcare facilities can ensure proper documentation of sterilizer and autoclave maintenance by implementing a structured record-keeping system. This includes maintaining inspection reports, cleaning and calibration records, staff training documentation, and records of any repairs or replacements performed. Electronic systems or software specifically designed for equipment maintenance can help streamline the documentation process.

Contact Auxo Medical for Trusted Autoclave and Sterilizer Preventative Maintenance 

When it comes to ensuring the reliability and efficacy of your autoclaves and sterilizers, look no further than Auxo Medical for trusted preventative maintenance services. As a leading name in the industry, Auxo Medical is committed to providing comprehensive maintenance solutions that keep your essential equipment in top working condition and up to regulation standards. Regular servicing by our skilled technicians helps prevent unexpected breakdowns, extends the life of your machinery, and ensures compliance with stringent health and safety standards. Auxo Medical’s preventative maintenance plans are meticulously designed to address all aspects of sterilizer performance, from routine inspections to timely repairs, ensuring your operations run smoothly and efficiently. With Auxo Medical, you can have peace of mind knowing that your sterilization processes are in expert hands. Contact Auxo Medical today by filling out a service request online or call our office at (888) 728-8448.

The post Sterilizer and Autoclave Preventative Maintenance as Required by CDC, Joint Commission, and CMS appeared first on Auxo Medical.

Unveiling the ⁤Innovation: How the Midmark M9 is ‌Redefining​ Autoclave Efficiency

A Game-Changer for Sterilization: Why​ the Midmark M9⁣ is ⁢a⁣ Must-Have in Healthcare‍ Facilities

Expert‌ Tips: Maximizing the Benefits of the⁣ Midmark ⁣M9 Autoclave for​ Optimal Sterilization

Order the Midmark Ritter M9 UltraClave Autoclave from Auxo Medical

For healthcare facilities looking to upgrade or expand their sterilization capabilities, ordering the Midmark Ritter M9 UltraClave Autoclave from Auxo Medical is an excellent choice. The Midmark Ritter M9 is renowned for its reliability and efficiency, making it a staple in clinics, dental offices, and surgical centers. Auxo Medical offers this leading-edge autoclave with its state-of-the-art features, including an intuitive LCD control panel and automatic door that simplifies the sterilization process. With exceptional customer service and competitive pricing, Auxo Medical ensures that acquiring this essential piece of equipment is a seamless and hassle-free experience. Opting for the Midmark Ritter M9 UltraClave through Auxo Medical not only guarantees you a top-quality product but also the support and guidance from a trusted supplier in the medical equipment industry.

Midmark Ritter M9 UltraClave (Autoclave), M9 UltraClave

Request Quote

The Midmark Ritter M9 UltraClave is a user-friendly automatic sterilizer designed for simple and reliable operation. Its automated features streamline the sterilization process: simply load the instruments, select the desired cycle, and press start. The M9 automatically fills with the correct water level and, upon cycle completion, automatically opens the door for efficient steam dissipation and faster drying times. Built-in safety features, including overheat protection, a pressure relief valve, and an error light, ensure safe and reliable performance. Self-program controls allow customization of cycle parameters to accommodate specific instrument processing needs, while pre-programmed cycles offer convenience for routine sterilization. The green LCD display provides clear visibility of cycle indicators. The M9 is commonly used in various healthcare settings such as dental clinics, medical offices, veterinary practices, and other outpatient facilities where efficient and reliable sterilization of instruments is critical. Its ease of use and compact design make it well-suited for smaller practices and labs. Industries beyond healthcare, such as tattoo parlors and beauty salons, may also utilize the M9 for sterilizing tools and equipment.

Download Brochure

To submit a quote request for this product please fill out the form below.

Product Quote Request

Name *

Name

Name

Name

Company Name *

Email *

Phone *

Shipping Zip Code *

Quantity *

Quantity *

Submit Quote Request for Product

Δ

SKU: AM-M9-022 Categories: Autoclaves, *Featured Tags: Autoclave, Esthetician Autoclave, Lab, Medical, Midmark, Outpatient, Refurbished, Research, Ritter, Tattoo & Piercing Autoclave, Veterinary Brand: Midmark, Ritter

• Description
• Additional information

Description

Midmark Ritter M9 UltraClave (Autoclave), M9-022

The Midmark Ritter M9 Ultraclave automatic sterilizer is an autoclave that couldn’t be easier and is time tested for reliability. You load it set it and forget it. Select your cycle and the time is set for you. Press Start and the Midmark M9 fills with the correct amount of water. Once the sterilization process is complete, the door opens automatically and quietly to dissipate the steam to give you fast drying time for your instruments. Its real convenience!

Features:

• Fills with correct amount of water when you hit the start button.
• Door opens automatically to dissipate steam and give you the fastest drying time.
• Built-in safety features such as overheat protection, a pressure relief valve and flashing “Error” light.
• Self Program Controls enable you to create different cycle parameters to meet specific instrument processing needs
• Green LCD Display for easy view of indicators

For Use in Industries:

• Medical offices
• Dental clinics
• Veterinary practices
• Outpatient facilities
• Research and medical laboratories
• Tattoo parlors
• Beauty salons
• Estheticians

For Sterilization of:

• Handpieces: Dental and surgical handpieces.
• Instruments: Scalpels, forceps, scissors, curettes, probes, and other surgical instruments.
• Needles: Hypodermic needles (in appropriate containers).
• Surgical burs: Used in dental procedures.
• Endodontic files: Used in root canal procedures.
• Glassware: Beakers, test tubes, and other laboratory glassware (heat-resistant).
• Metal instruments: Retractors, clamps, speculums.
• Plastic instruments: Certain heat-resistant plastics and polymers used in medical devices.
• Rubber items: Certain heat-resistant rubber items.
• Fabric: Wrapped instrument packs and certain heat-resistant fabrics.
• Tattoo needles: Properly packaged and in appropriate containers.
• Grips and tubes: Metal grips and tubes used with tattoo machines.
• Stainless steel jewelry: Body jewelry made of surgical stainless steel.
• Metal tools: Scissors, forceps, and other metal tools used during the tattooing process.
• Metal implements: Comedone extractors, tweezers, nail clippers, cuticle pushers, and other metal tools used in facials, manicures, and pedicures.
• Scissors and razors: Hair cutting scissors and razors (if compatible with steam sterilization).
• Glassware: Small glass containers used for mixing products (if heat-resistant)

Important Considerations:

• Manufacturer’s Instructions: Always consult the instrument or device manufacturer’s instructions for compatibility with steam sterilization.
• Packaging: Items should be properly packaged to ensure steam penetration and maintain sterility after the cycle.
• Materials Compatibility: Not all materials can withstand steam sterilization. Avoid sterilizing heat-sensitive materials, liquids in sealed containers, and items that can be damaged by moisture.
• Cleaning: Thoroughly clean instruments before sterilization to remove debris and bioburden. (Cleaning of instruments in a small facility can be assisted with undercounter or countertop washer disinfectors or ultrasonic cleaners)

 

Download Brochure

Additional information

Condition	Refurbished

Related Products

• Add to cart

  Medfusion 3500 V 3.0.6 Syringe Pump

  $1,795.00

  The Medfusion 3500 Syringe Pump with Version 3.0.6 Software is a versatile, advanced infusion device suitable for use across various hospital departments and physician practices. This refurbished "smart pump" features automatic detection of multiple syringe types from seven different manufacturers,…
• View Product

  GE MAC 5500 HD ECG

  Request Quote

  The GE MAC 5500 HD Resting ECG System is a high-end ECG system designed for speed, accuracy, and comprehensive disease management. Built upon GE's legacy of ECG innovation, the MAC 5500 HD offers advanced algorithms and networking capabilities, making it…
• View Product

  Stryker MX PRO R3 Emergency Transport Cot

  Request Quote

  The Stryker MX PRO R3 Emergency Transport Cot is a lightweight, highly durable patient transport solution designed for demanding emergency situations. Weighing just 81 pounds, it supports up to 650 pounds, making it one of the most versatile and maneuverable…

The post The Midmark M9 Autoclave: Midmark Ritter M9 UltraClave Automatic Sterilizer appeared first on Auxo Medical.

Serving Central and Western Ohio

At Auxo Medical, we proudly serve the Central and Western Ohio region, including Dayton, Columbus, Cincinnati, Springfield, Lima, as well as Muncie, Indiana, and the surrounding areas. We are committed to providing local, reliable, and affordable maintenance and repair solutions for medical equipment. Whether you need preventive maintenance, emergency repairs, or equipment replacement, our team is here to assist you.

Trusted SPD Equipment Maintenance and Repair in Central and West Ohio

At Auxo Medical, we specialize in maintaining and repairing sterile processing equipment in Central and Western Ohio. Our reputation for excellence and dedication to customer satisfaction is unrivaled. We understand the importance of reliable and efficient equipment in medical facilities, and we are committed to keeping your equipment in optimal condition.

Our team of highly skilled technicians possesses the expertise and knowledge necessary to handle various types of sterile processing equipment, including sterilizers, autoclaves, washer-disinfectors, ultrasonic cleaners, steam generators, and boilers. We ensure that these equipment function at their optimal level, adhering to industry standards and regulations.

With our comprehensive maintenance and repair services, clients can have peace of mind, knowing that their equipment is in capable hands. We offer timely repairs, preventive maintenance programs, and regular inspections to keep your equipment running smoothly. By adopting a proactive approach, we help healthcare facilities avoid expensive breakdowns and minimize downtime.

Comprehensive Maintenance and Repair Services

At Auxo Medical, we offer a wide range of maintenance and repair services for medical equipment. Here are some of the services we provide:

Sterile Processing Equipment Maintenance and Repair

We specialize in maintaining and repairing sterile processing equipment, including sterilizers, autoclaves, washer-disinfectors, ultrasonic cleaners, steam generators, and boilers. Our team of skilled technicians conducts regular inspections and servicing to identify and resolve any potential issues before they become major problems. With our preventive maintenance programs, you can prolong the lifespan of your equipment, improve efficiency, and ensure compliance with industry standards.

Preventive Maintenance Programs

To minimize disruptions and ensure the smooth operation of your medical equipment, we offer preventive maintenance programs. Our skilled technicians are experienced in identifying and resolving issues before they escalate, keeping your equipment in optimal working condition. Regular servicing and inspections can extend the lifespan of your machinery, improve efficiency, and prevent unexpected breakdowns.

Emergency Repairs

We understand that emergencies can happen at any time. That’s why we offer prompt and reliable emergency repair services for medical equipment. Our team of technicians is available to address any urgent repair needs, ensuring minimal downtime and disruption to your healthcare facility.

Get Your Quote / Repair Request

If you are in need of maintenance or repair services for your medical equipment, simply fill out our online form to request a quote. Our team will review your request and provide you with a comprehensive quote tailored to your specific needs. We strive to offer competitive pricing without compromising on the quality of our services.

Testimonials and Reviews

Don’t just take our word for it. Here are some testimonials from our satisfied customers:

• “I have had the pleasure to work with Anthony and the Auxo team over the last few months. They were very thorough in communicating and completed PM inspections, repairs, and paperwork in a timely manner. The Auxo team went above and beyond to provide quality service at a significant cost savings in comparison to the OEM.” – Lori Migliore, Channel Leader, Service Partner Management – PartsSource.
• “Auxo has become a preferred service provider for PartsSource and we will continue to work closely with them on future endeavors.” – Bonnie B., Category Manager.
• “The Auxo Medical team is qualified to work on a vast array of equipment and systems. They’ve provided staff training, personalized service, and attention to detail for the past eight years.” – Branch Manager / Program Specialist.
• “Auxo Medical came into our facility a couple of months ago and has done an outstanding job by working with our staff and getting prior issues identified and resolved. Auxo has been a true partner with our organization.” – Darcy A., Manager Biomedical Engineering – Tampa, FL.

Contact Auxo Medical in Ohio Today

If you’re looking for exceptional medical equipment services in Ohio, Auxo Medical is your go-to source. Our team is ready and waiting to provide you with the information and assistance you need, whether it’s about purchasing, leasing, or servicing medical equipment. Don’t let any questions or concerns go unresolved; reach out to us today. Our friendly and knowledgeable staff is committed to offering personalized support, ensuring that you find the right solutions for your specific needs. Contact Auxo Medical in Ohio today and take the first step towards enhancing your medical practice with our top-notch services. Call our office at (888) 728-8448.

The post Autoclave, Sterilizer, Washer Disinfector & Steam Generator Maintenance & Repair in Ohio appeared first on Auxo Medical.