Below is a sampling of the products you’ll find in our Featured category, along with common use cases and the types of facilities that benefit most from each solution.

Why our Featured medical equipment category is a smart place to start

Our Featured category is designed to highlight medical equipment that helps facilities move faster—whether you’re opening a new space, replacing a down unit, expanding service lines, or standardizing equipment across multiple rooms. You’ll find a mix of critical clinical equipment across sterile processing, exam rooms, operating rooms, patient monitoring, emergency response, and patient transport.

Because many Featured items are selected specifically for broad demand across healthcare environments, this category is a strong starting point for:

• Ambulatory surgery centers that need dependable OR and procedure room equipment
• Hospitals that need patient monitoring, transport, or emergency readiness coverage
• Clinics and specialty practices that need exam room uptime and workflow efficiency
• Sterile processing departments focused on consistent instrument reprocessing

Infusion therapy and medication delivery: pumps that support safe, consistent workflows

Infusion and syringe pump reliability impacts patient safety, nurse workload, and therapy consistency. If you’re outfitting an infusion area, updating inpatient capability, or supporting procedural sedation workflows, these Featured items are common go-tos.

• Medfusion 3500 V 3.0.6 Syringe Pump
  Great fit for: hospitals, outpatient infusion, anesthesia support areas, and specialty practices that rely on controlled syringe delivery.
  Typical use cases: medication administration where consistent syringe infusion performance and workflow-friendly setup matters.
• Abbott Plum A+ IV Infusion Pump, Single Channel
  Great fit for: med-surg floors, outpatient care environments, and treatment areas that need dependable infusion capability.
  Typical use cases: IV therapy delivery in clinical settings that value straightforward operation and repeatable processes.
• Baxa Repeater Pump
  Great fit for: pharmacy operations and compounding workflows in hospitals and infusion-focused environments.
  Typical use cases: supporting standardized fluid transfer tasks where accuracy and repeatability reduce staff burden.

Patient monitoring and vital signs: scalable coverage from spot checks to continuous monitoring

Monitoring needs vary by department. A pre-op area might need efficient vital signs capture, while perioperative and higher-acuity areas may need continuous monitoring with flexible parameter options. Our Featured selection includes options that work across the continuum of care.

• Edan IM70 Patient Monitor (Refurbished)
  Great fit for: general care environments, procedure areas, and facilities expanding monitoring capacity.
  Typical use cases: continuous bedside monitoring where staff need clear visibility and dependable performance.
• Mindray DPM5 Patient Monitor
  Great fit for: clinics, outpatient settings, and facilities that benefit from moving monitors between rooms.
  Typical use cases: flexible monitoring coverage in spaces that balance throughput with patient safety.
• Mindray Passport V with CO2
  Great fit for: perioperative environments, procedural areas, and care teams that want broader monitoring capability.
  Typical use cases: supporting patient monitoring workflows where capnography is clinically valuable.
• Mindray Passport 8 Patient Monitor with Sidestream EtCO2
  Great fit for: OR, PACU, and procedure-driven departments that prioritize strong monitoring capability.
  Typical use cases: continuous monitoring in procedural and perioperative environments.
• Welch Allyn Spot Vital Signs LXi Monitor
  Great fit for: primary care, urgent care, specialty clinics, and intake areas focused on fast vitals capture.
  Typical use cases: efficient spot-check vitals during triage, intake, and routine visits.
• Welch Allyn 6000 Series Vital Signs Monitor w/ CO2
  Great fit for: ambulatory care, surgery centers, and general care floors that want enhanced vitals monitoring.
  Typical use cases: standardized vital signs workflows where easy cleaning and clear display support busy teams.
• Welch Allyn Spot Vital Signs Model 420 NTB
  Great fit for: outpatient clinics and specialty practices that want quick, reliable vitals in a compact workflow.
  Typical use cases: routine vitals capture during visits, follow-ups, and screening workflows.

Cardiology diagnostics: ECG systems for screening, intake, and clinical decision support

ECG equipment often needs to work across multiple workflows—from routine screenings to pre-op evaluations. If you’re upgrading an older unit or adding capability to support patient throughput, these Featured options are worth a close look.

• GE MAC 5500 HD ECG
  Great fit for: hospitals, cardiology services, and facilities that need a strong resting ECG workflow.
  Typical use cases: structured ECG acquisition in clinical environments that value speed, clarity, and system integration potential.
• Mortara ELI 250 ECG Machine
  Great fit for: clinics, specialty practices, and facilities that benefit from a portable ECG workflow.
  Typical use cases: point-of-care ECG capture that supports fast clinical decisions in outpatient and intake environments.

Sterile processing and infection control: build a stronger instrument reprocessing line

Instrument reprocessing is a chain—cleaning, rinsing, drying, and sterilization all matter. When any link is weak, departments feel it as delays, rework, and risk. That’s why sterile processing equipment is one of the most impactful upgrades a facility can make.

• Steris Caviwave Single Chamber Ultrasonic Cleaner 15 Gal
  Great fit for: sterile processing departments, surgery centers, and instrument-heavy specialty clinics.
  Typical use cases: ultrasonic cleaning to improve soil removal prior to sterilization steps.
• Steris Caviwave Pro Single Chamber 17 GAL Ultrasonic Cleaner
  Great fit for: higher-throughput sterile processing environments with frequent instrument turnover.
  Typical use cases: consistent ultrasonic cleaning performance where workflow efficiency and repeatable outcomes matter.
• Steris Caviwave Rinsing and Drying Ultrasonic Cleaner
  Great fit for: sterile processing teams that want a more streamlined cleaning-to-drying workflow.
  Typical use cases: improving throughput while supporting high-quality instrument turnaround.
• Durasonic 4L Tabletop Ultrasonic Cleaner
  Great fit for: smaller clinics, specialty practices, and departments that need tabletop ultrasonic cleaning capability.
  Typical use cases: cleaning smaller loads efficiently without dedicating large-floor equipment space.
• Midmark Ritter M9 UltraClave (Autoclave), M9-022
  Great fit for: clinics and outpatient environments that need a trusted sterilization workhorse.
  Typical use cases: instrument sterilization supporting daily procedure schedules and quick turnovers.
• Tuttnauer 3870E Autoclave
  Great fit for: busy practices and departments with larger sterilization loads.
  Typical use cases: higher-capacity sterilization needs in clinical environments focused on steady throughput.
• Tuttnauer Elara 11 Autoclave
  Great fit for: facilities seeking advanced sterilization capability aligned with modern infection control priorities.
  Typical use cases: supporting instrument processing demands where cycle performance and consistency are key.

OR and procedure rooms: tables, lighting, positioning, and surgical energy

Procedure rooms and operating rooms run on coordination. The right combination of surgical tables, lighting, patient positioning, and clinical accessories helps teams stay efficient while supporting patient safety and comfort.

• Steris Amsco Model 3085 Surgical Table
  Great fit for: hospitals and surgery centers that need a versatile general surgical table.
  Typical use cases: supporting a range of surgical specialties where positioning flexibility is essential.
• Skytron 3600B Surgical Table
  Great fit for: OR environments that prioritize positioning capability and imaging access.
  Typical use cases: procedures where table design supports both clinician access and workflow needs.
• Steris LED385 Exam Light on Floor Stand
  Great fit for: exam rooms, procedure rooms, specialty clinics, and minor treatment spaces.
  Typical use cases: improving visualization for exams and in-office procedures without a ceiling-mount buildout.
• Steris Harmony Air M Series Dual Head LED Surgical Light
  Great fit for: operating rooms and procedure rooms where consistent illumination supports clinical precision.
  Typical use cases: surgical lighting needs where shadow management and bright field illumination matter.
• Allen Yellofin Lift-Assist Stirrups (OEM# O-YFASI)
  Great fit for: women’s health, urology, and surgical specialties that rely on consistent lower-extremity positioning.
  Typical use cases: procedures where ergonomic positioning and staff workflow are both critical.
• Valleylab Force FX ESU
  Great fit for: surgical environments and procedural specialties that depend on trusted electrosurgical energy delivery.
  Typical use cases: general surgery and specialty procedures that require consistent surgical energy performance.

Exam rooms and patient access: modernize comfort, accessibility, and clinician workflow

Exam room equipment shapes patient experience and staff efficiency. If you’re building new rooms, renovating, or upgrading to improve accessibility, these Featured solutions help create a more functional point of care.

• Midmark 623 Exam Table
  Great fit for: primary care, specialty clinics, and facilities improving patient access.
  Typical use cases: exams where barrier-free access supports patients with mobility challenges.
• Midmark 626 Exam Table
  Great fit for: high-throughput clinics and exam rooms that want dependable, clinician-friendly workflows.
  Typical use cases: day-to-day exams where positioning efficiency supports schedule density.
• Midmark 630 Barrier-Free Power Procedure Table
  Great fit for: procedure-focused clinics and outpatient specialties that need powered positioning flexibility.
  Typical use cases: in-office procedures where precise positioning supports both patient comfort and clinician access.
• Midmark 641 Procedure Chair
  Great fit for: outpatient procedures, specialty practices, and departments prioritizing patient access.
  Typical use cases: procedures where multi-position capability supports efficient care delivery.
• Midmark Ritter 75L Exam Chair
  Great fit for: specialty clinics and multi-use exam environments.
  Typical use cases: exams and minor procedures where adjustable positioning supports consistent workflow.

Imaging and airway management: capability that supports critical moments

Some equipment categories are “day-to-day.” Others are “when it matters most.” Imaging and airway tools often fall into the second group—especially in procedure-heavy settings, emergency workflows, and airway management scenarios.

• OEC 9800 C-Arm, 9” C-arm with GSP & Flat Panel Upgrade
  Great fit for: surgery centers and hospitals performing orthopedic, pain management, spine, and general surgical imaging workflows.
  Typical use cases: mobile fluoroscopy support during procedures where imaging guidance improves precision.
• Verathon GlideScope Monitor with Baton
  Great fit for: anesthesia teams, emergency departments, ICUs, and procedure areas that prioritize airway visibility.
  Typical use cases: airway management where visualization supports confident placement and training consistency.

Emergency readiness and patient transport: stretchers, gurneys, stair chairs, AEDs, and defibrillators

From patient movement to cardiac response, readiness equipment protects patients and reduces staff strain. If you’re equipping an ED, adding inpatient transport capacity, or strengthening first-response coverage, these Featured products support the front lines.

• Philips Heartstart FRX AED w/ Wall Mount Box
  Great fit for: clinics, outpatient centers, facilities management teams, and any care environment building AED coverage.
  Typical use cases: fast-access defibrillation capability for public and clinical spaces.
• Physio-Control Lifepak 20E Defibrillator
  Great fit for: hospitals and in-facility responder teams that need defibrillation and monitoring capability.
  Typical use cases: emergency response workflows where time, usability, and reliability matter.
• Stryker MX Pro 6080 Emergency Gurney
  Great fit for: emergency departments, transport teams, and high-traffic patient movement environments.
  Typical use cases: rapid patient transport where durable construction supports frequent daily use.
• Stryker 1115 Prime Big Wheel Stretcher
  Great fit for: hospitals and departments moving patients across longer corridors and busy units.
  Typical use cases: transport workflows where maneuverability and patient comfort support better moves.
• Mac PT-1000 Transport Stretcher (Refurbished)
  Great fit for: cost-conscious facilities that still require dependable transport capability.
  Typical use cases: general patient transfer across departments and care areas.
• Pedigo 5400 W Stretcher, Side Brake Only
  Great fit for: hospitals and procedural environments that want a practical stretcher option for multiple areas.
  Typical use cases: supporting patient movement between departments such as perioperative areas and recovery spaces.
• Stryker 5050 Stretcher Chair
  Great fit for: surgery centers and compact clinical spaces that need flexible positioning.
  Typical use cases: converting between transport and seated workflows without changing equipment.
• Stryker Stair-PRO Stair Chair
  Great fit for: EMS, transport teams, and facilities that manage stairs during patient movement.
  Typical use cases: safer patient movement on stairs while reducing caregiver strain.
• Arizant 775 Bair Hugger
  Great fit for: perioperative environments and recovery areas focused on patient comfort.
  Typical use cases: warming support in pre-op, OR, and recovery workflows.

Orthopedic workflow support: tools that keep patient flow moving

In orthopedic and cast room environments, speed and cleanup matter—especially when patient volume spikes. This Featured option supports efficient cast removal workflows.

• Stryker Cast Saw with Vacuum
  Great fit for: orthopedic clinics, sports medicine, urgent care, and hospital ortho departments.
  Typical use cases: cast removal workflows where integrated suction supports cleaner, faster room turnover.

How to choose the right Featured equipment for your facility

If you’re comparing options in our Featured category, here are practical selection criteria we recommend using so you get equipment that fits your workflow—not just your budget:

• Care setting: outpatient clinics and high-acuity units often need different monitoring, transport, and procedure capabilities.
• Throughput and staffing: higher volume environments benefit from equipment that reduces steps and speeds room turnover.
• Room constraints: footprints, mounting needs, and power considerations can make or break a smooth installation.
• Standardization goals: aligning models across rooms can simplify training, maintenance, and parts planning.
• Serviceability: plan for preventative maintenance and long-term uptime—especially for sterile processing and perioperative equipment.

When you’re ready, start with our Featured medical equipment collection and click into any product page to request a quote or purchase (depending on the item). If you want to standardize a room buildout—OR, SPD, clinic exam rooms, or transport—we can help you map the right combination of equipment for your space and workflow.

The post Featured Medical Equipment from Auxo Medical: Solutions for Surgery Centers, Clinics, Hospitals, and Sterile Processing appeared first on Auxo Medical.

Expert Repairs, Parts, and Maintenance

We specialize in medical equipment repair and maintenance that meets or exceeds original manufacturer standards. Our team refurbishes equipment with precision, often providing the same warranty coverage as the OEM. When issues arise, our qualified service technicians perform on-site repairs quickly and efficiently, minimizing downtime for your facility. From routine maintenance to complex troubleshooting, we handle it all with the expertise your equipment deserves.

Sales Consultation and Support

Outfitting a medical office or facility can feel overwhelming, especially when sourcing from multiple vendors. We simplify the process by offering comprehensive sales consultation and support. Our team helps you select the right equipment from a wide range of popular manufacturers and models, all at a fraction of standard OEM costs. This approach gives you the performance you need along with the financial flexibility to invest in other areas of your practice.

Valuation and Liquidation Services

Knowing the true value of your medical equipment is essential whether you are upgrading, liquidating assets, or preparing insurance documentation. We provide professional medical equipment valuations and liquidation services tailored to your specific situation. Our experts assess equipment accurately so you can make informed decisions and maximize returns during any transition.

Flexible Financing Options

We make acquiring or upgrading medical equipment easier through our partnership with leading finance companies. Our financing solutions include competitive rates across a broad spectrum of needs. You can get an instant equipment lease quote, compare monthly payment plans, and apply for financing in just minutes—all at no cost to apply. Even if your business is newer, we can connect you with alternative financing sources to help move forward.

At Auxo Medical, we are committed to being your trusted partner for every stage of medical equipment ownership. From repairs and maintenance to consultation, valuation, liquidation, and financing, our services are built around your success. Contact us today to learn how we can support your facility with reliable, cost-effective solutions.

The post Auxo Medical: Comprehensive Additional Services for Your Medical Equipment Needs appeared first on Auxo Medical.

What we do at Auxo Medical

We support healthcare and industrial environments with equipment sales and service that are built around uptime, safety, and predictable ownership costs. We work with a wide range of customers, including hospitals, surgery centers, outpatient clinics, dental practices, veterinary clinics, research organizations, laboratories, and even industries like agriculture, aerospace, and food processing.

In practical terms, you can come to us for

• New medical and lab equipment across many categories and brands
• Refurbished equipment restored to “like new” condition through a documented process
• On-site field service in our supported regions and equipment categories
• Preventive maintenance programs and customized service plans
• OEM and aftermarket parts sourcing
• Equipment installation and setup support
• Financing options and trade-in support

Medical and lab equipment we provide

We provide a broad range of medical and lab equipment to fit the needs of clinical care, sterile processing, and specialized environments. Because different facilities have different requirements, we focus on matching the right equipment configuration to your workflow, volume, utilities, and compliance needs—so you are not forced into a one-size-fits-all purchase.

If you are equipping a new space, replacing aging assets, or expanding capacity, we can support both new equipment sales and refurbished equipment options—so you can choose the right balance of budget, availability, and long-term reliability.

Refurbished medical equipment you can trust

Refurbished equipment should never be a gamble. Our approach is built around consistent processes, thorough testing, and a standard of finish and function that aims to deliver “like new” results—not “cleaned up and shipped out.” We break down equipment, restore it, and test it thoroughly so it is ready for real clinical use.

We refurbish a wide range of devices, including sterile processing and biomedical equipment such as:

• Sterilizers and autoclaves
• Washer disinfectors
• Surgical tables
• Stretchers and beds
• Surgical and exam lights
• Warmers
• Steam generators
• Other biomedical equipment types

Refurbished vs used: why the difference matters

Used equipment can be easy to buy, but difficult to trust—especially when service history is unclear and performance is not guaranteed. Refurbished equipment, when done correctly, is restored through a structured process and backed by warranty coverage, which helps reduce unexpected downtime and surprise repair costs.

New equipment sales, plus practical support

Yes, we sell new equipment across many types and brands. Just as importantly, we can support you through the selection process so you can make a purchase that matches your facility’s real constraints: space, power, steam availability, throughput goals, staff workflow, and serviceability.

Delivery and installation that fits your timeline

We deliver equipment throughout the contiguous United States, and in some cases we can ship internationally. If you need help beyond the shipment, we also offer installation on the equipment we provide, so your team is not left alone to figure out setup details or integration needs.

Parts support: OEM and aftermarket options

Downtime often comes down to parts availability. We support customers with a wide range of OEM and aftermarket parts so repairs and maintenance can move forward without unnecessary delays. If you need help identifying the right part or confirming compatibility, our team can assist through the request process.

Where we provide field service

We provide field service across multiple regions, including:

• Virginia
• Maryland
• Washington, D.C.
• North Carolina
• South Carolina
• Tennessee
• Georgia
• Florida
• Kentucky
• Ohio
• Michigan

This field coverage allows us to support maintenance, inspections, repairs, and service plan visits with on-site technicians in the areas we serve.

Certified and factory-trained technicians

Service quality is only as good as the people doing the work. We have technicians with current and active AAMI CBET credentials, and we also draw from skilled trade backgrounds that matter in real-world installations and repairs, including electrician, plumbing, HVAC, and welding experience.

We also have factory-trained technicians across a range of manufacturers and equipment types. Examples include:

• Sterilizers and washers from manufacturers such as Steris, Belimed, Primus, and Tuttnauer
• Surgical lights from manufacturers such as Amico and NUVO
• Anesthesia machines from manufacturers such as GE and Mindray
• C-arms and X-ray systems such as OEC/GE
• EMS and transport equipment such as Stryker

To keep skills current, our technicians regularly attend continuing education opportunities.

Service plans for sterile processing equipment

Sterile processing equipment is mission-critical, and the best way to reduce surprise failures is to pair responsive repair support with a preventive maintenance strategy. We offer multiple service plan structures and can customize a plan to match your department’s needs.

Our service plan options include:

• Alpha plan, designed as our highest maintenance and repair coverage with fixed investment
• Beta plan, designed to increase predictability with more comprehensive coverage
• Gamma plan, designed as a labor-focused maintenance program built around scheduled service
• Delta plan, designed to improve reliability with a moderate investment level
• Delta Plus coverage, which can include unscheduled service calls in addition to scheduled service

A good service plan is not just a contract—it is an operational tool. The goal is to keep cycles consistent, reduce disruptions, and make it easier to budget for maintenance over time.

Biomedical equipment inspections, calibrations, and annual checks

Many facilities need recurring inspections and performance checks to stay compliant and safe. We provide a wide range of biomedical equipment services that can include inspections, calibrations, and equipment check-ins. Because needs vary by facility and device category, we align the work scope to your internal requirements and operational schedule.

Imaging equipment service: what we service and what we do not

We do not service MRI and CT scanners. We do provide full field services for fluoroscopy and X-ray systems, including C-arms, cath labs, and rad rooms.

This distinction matters because it helps you route service requests to the right team quickly—especially when imaging uptime impacts patient flow and procedure schedules.

Steam constraints? We can still help you run sterilizers and washers

Not every facility has building steam available, and utilities limitations should not automatically block your sterile processing goals. Many sterilizer and washer options can be configured with integral steam boilers. If steam needs extend across multiple devices, we can also provide freestanding boiler options.

Financing and trade-ins

Capital equipment planning often involves timing, budget cycles, and competing priorities. We offer affordable financing options to help facilities acquire needed equipment while keeping cash flow manageable.

We also accept trade-ins. If you are replacing equipment, trading in existing assets can be a practical way to offset costs and simplify transitions during upgrades or expansions.

Documentation and transparency in refurbishment

Confidence comes from clarity. Our refurbishment process varies by equipment type, and we document the process and provide documentation to the customer. This helps align expectations and supports internal recordkeeping.

Important note about personal equipment

Our services are focused on professional and organizational needs. We do not provide services for personal equipment.

Why facilities choose us

Facilities choose Auxo Medical because we combine equipment access with real service capability. Instead of forcing you to coordinate across multiple vendors, we aim to be the single partner you can rely on for equipment sourcing, installation support, parts, ongoing maintenance, and field repair—especially in sterile processing, biomedical equipment service, anesthesia equipment support, and fluoroscopy and X-ray service categories.

If your goal is to reduce downtime, strengthen compliance readiness, and extend the useful life of critical equipment, we are ready to help.

Contact Auxo Medical Today!

Contact Us

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Phone Number *

Zip Code *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

The post Auxo Medical FAQs: New and Refurbished Medical Equipment Sales, Service, Maintenance, and Repair appeared first on Auxo Medical.

Who we are

We are Auxo Medical, and we exist to make equipment ownership simpler, more dependable, and easier to support over the long haul. Our team brings together equipment expertise, responsive field service, and a relationship-first mindset so you can standardize support, reduce downtime, and plan confidently.

We are built around a straightforward promise: deliver the medical equipment and service you need from a company you can trust. That trust is earned through consistency—showing up, communicating clearly, and standing behind our work.

What we do: sales, maintenance, and repair—together

We are an all-in-one medical equipment solution for sales, maintenance, and repair. Instead of juggling vendors, we help you align purchasing decisions with real-world serviceability, long-term upkeep, and day-to-day reliability.

We provide medical equipment plus repair and maintenance services for environments that cannot afford surprises—supporting clinical and lab teams with the responsiveness and follow-through you expect.

Refurbished and reconditioned equipment you can feel confident buying

We offer refurbished and reconditioned medical equipment with a quality standard we take personally. When your facility chooses refurbished equipment, you should not have to choose between value and confidence—you should get both.

Who we serve

We support a wide range of healthcare and laboratory settings, including:

• Ambulatory surgery centers
• Hospitals
• Laboratories
• Private physician practices
• And more clinical and operational care environments that rely on dependable equipment performance

Our role is to bring the expertise to match the right equipment to the right use case, the reliability to build lasting relationships, and the responsiveness to support you when service needs happen.

Our story: from East Coast roots to nationwide service momentum

We began as East Coast Distributors, and later Jay Crabtree purchased the company and changed the name to Auxo Medical. From our headquarters in Richmond, Virginia, we expanded our services and operations so we could support more facilities with a broader, more complete set of solutions.

Over time, we expanded with affiliated operations in states including Michigan, Kentucky, Florida, Georgia, Tennessee, and Ohio, while our field service team grew to support hundreds of accounts across more than ten states and a large community of preventive maintenance agreement holders.

Where we work: field service locations and regional support

Our headquarters is in Richmond, Virginia, and we support customers through multiple field service locations across the eastern United States. Our service footprint includes: Virginia, Maryland, Washington, DC, North Carolina, South Carolina, East Tennessee, Grand Rapids in Michigan, Lexington in Kentucky, Tampa in Florida, Atlanta in Georgia, and Dayton in Ohio serving central and western Ohio.

As part of our continued growth, we expanded further west by opening field service in Dayton, Ohio at the beginning of twenty twenty four—one more step in our ongoing field maintenance and repair expansion throughout the United States.

Our mission and vision

Our mission is to focus on sustainable quality, continual improvement, and unmatched training—so we can provide superior returns and opportunities for our customers, employees, and investors.

Our vision is to encourage integrity, transparency, and value in healthcare and life sciences equipment and service solutions.

Our core values: how we make decisions and earn long-term trust

The best equipment partner is not just knowledgeable—they are steady, accountable, and safe. Our core values guide how we serve customers and how we operate as a team:

• Integrity and professionalism
  We value honesty and integrity above all else, and we treat customers and employees with respect and professionalism.
• Customers
  Our customers are the lifeblood of our business, and we protect those relationships through honesty, flexibility, commitment, and quality.
• Improvement and innovation
  We are a learning organization, always working to improve our company and ourselves.
• Empowering work environments
  We work without fear of failure by taking thoughtful risks, and we encourage decision-making that supports our company and customers.
• Teamwork
  We strive to help teammates and customers succeed, holding ourselves accountable and always asking what we could have done better.
• Safety
  Nothing we do is worth risking the health or safety of our team members or customers.
• Wise environmental practices
  We respect our environment and recycle, reuse, and reduce waste wherever and whenever we can.

What customers say about working with us

Our clients consistently describe the experience of working with Auxo Medical in practical, outcome-based terms—strong communication, timely paperwork, thorough inspections, and service that helps reduce downtime and overall cost compared to OEM service pathways.

We also hear, again and again, that our team shows up with professionalism and responsiveness—one customer put it simply: “response to service calls has been stellar.”

How to work with Auxo Medical

If you are looking for a long-term equipment partner—not just a one-time purchase—we are set up to support you through the full lifecycle: selecting equipment that fits your needs, maintaining performance through preventive maintenance, and responding quickly when repairs are needed. That combination is how we help teams protect uptime and plan with confidence.

Contact Us

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Phone Number *

Zip Code *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

Frequently asked questions

Do you provide both equipment and service?

Yes. We provide medical equipment sales along with maintenance and repair services, designed to work together as one solution.

What types of facilities do you support?

We serve ambulatory surgery centers, hospitals, laboratories, private physician practices, and more.

Do you service personal equipment?

No. We do not provide services for personal equipment.

Where are you headquartered, and where do you provide field service?

We are headquartered in Richmond, Virginia, with field service locations across multiple states including Virginia, Maryland, Washington, DC, North Carolina, South Carolina, East Tennessee, Michigan, Kentucky, Florida, Georgia, and Ohio.

The post About Auxo Medical: Medical and Lab Equipment Sales, Maintenance, and Repair You Can Trust appeared first on Auxo Medical.

We provide preventative maintenance, inspections, calibrations, and repair for a wide range of medical and lab equipment, with a strong focus on sterile processing, biomedical, anesthesia, and imaging systems. Our field coverage is regional, and service categories can vary by location—so the fastest way to confirm availability is to review the service area pages below and contact us for a quote.

If you’re ready to schedule service, visit our Contact page. If you don’t see your city listed, reach out anyway—we may still have a solution.

What We Service (and Why Preventative Maintenance Matters)

Preventative maintenance is about more than “checking a box.” It’s how you reduce downtime, catch small issues before they become major failures, and maintain consistent performance for staff and patients. In regulated environments, it also supports documentation needs and helps keep equipment aligned with common safety and quality expectations.

• Sterile processing equipment:
  We help keep sterilizers, autoclaves, washer disinfectors, ultrasonic cleaners, steam generators, and boilers operating reliably—supporting sterile workflows and instrument turnaround.
  Learn more on our Sterile Processing Equipment Service page.
• Biomedical equipment:
  We service many everyday clinical workhorses such as patient monitors, ECG, exam and surgical tables, OR lighting, stretchers, beds, and more—helping you maintain safe, consistent patient care.
  Learn more on our Biomedical Equipment Service page.
• Anesthesia equipment:
  We inspect, maintain, calibrate, and repair anesthesia machines, anesthesia monitors, and related systems—supporting safety and performance in the OR and procedural environments.
  Learn more on our Anesthesia Equipment Service page.
• Imaging equipment:
  We support inspections and repairs for systems such as C-arms, R/F rooms, cath labs, and portable X-ray—plus help with common operational issues like image quality problems and basic PACS/DICOM troubleshooting.
  Learn more on our Imaging Equipment Service page.

Our Field Service Areas

We provide onsite service across the following field service areas. Select your region to see local coverage details and common cities we support.

• Virginia
• Maryland and Washington, DC
• North Carolina
• East Tennessee (including nearby areas in Alabama and Georgia)
• South Carolina
• Atlanta Metro, Georgia
• Central Florida
• Central and Western Ohio
• Lexington, Kentucky and surrounding areas
• Grand Rapids, Michigan and surrounding areas

Local Coverage Highlights (By Region)

Below are high-level examples of the cities and metros we commonly support..

Virginia medical and lab equipment maintenance and repair

Across Virginia, we support facilities in and around Richmond, Chesterfield, Charlottesville, Roanoke, Newport News, Norfolk, Virginia Beach, Fredericksburg, Alexandria, and Arlington—plus surrounding areas. We provide preventative maintenance, inspections, calibrations, and repair for sterile processing, biomedical, anesthesia, and imaging equipment (services may vary by location).

Maryland and Washington, DC medical equipment service

In Maryland and the DC region, we commonly serve Baltimore, Glen Burnie, Annapolis, Frederick, College Park, Bethesda, and Washington, DC—plus nearby areas that border Northern Virginia. We provide preventative maintenance, inspections, calibrations, and repair for sterile processing, biomedical, anesthesia, and imaging equipment (services may vary by location).

North Carolina preventative maintenance and repair

In North Carolina, we support a wide range of facilities in and around Raleigh, Durham, Winston-Salem, Charlotte, Fayetteville, Greensboro, Greenville, Wilmington, and Asheville. Our local technicians help keep sterile processing, biomedical, anesthesia, and imaging equipment operating safely and consistently (services may vary by location).

East Tennessee medical equipment repair and preventative maintenance

Our East Tennessee service area includes key cities such as Knoxville, Chattanooga, and Cookeville, and can extend into nearby regions like Huntsville and Dalton depending on the service need. If your facility is in East or Central Tennessee—or nearby areas of Alabama or Georgia—contact us and we’ll help confirm coverage and service availability.

South Carolina medical and lab equipment service

In South Carolina, we commonly support facilities in and around Columbia, Florence, Myrtle Beach, and Charleston. Our South Carolina coverage can also include nearby cross-border metros depending on the service request, including areas near Charlotte, Savannah, and Augusta. If you’re unsure whether your site is in range, contact us—we’ll verify quickly.

Atlanta Metro, Georgia medical equipment maintenance and repair

In the Atlanta Metro area, we frequently serve facilities in Atlanta as well as surrounding communities such as Roswell, Gainesville, Athens, Alpharetta, Marietta, Carrollton, Macon, Newnan, Peachtree City, and Griffin. We help clinical and lab teams reduce downtime through consistent preventative maintenance and responsive repairs.

Central Florida sterile processing and medical equipment service

Our Central Florida coverage includes areas such as Tampa, St. Petersburg, Orlando, Lakeland, Sarasota, Fort Myers, West Palm Beach, Port St. Lucie, Melbourne, Daytona Beach, and Ocala. If you’re searching for reliable sterile processing equipment repair and preventative maintenance in Florida, we’re built for fast response and practical, facility-friendly service.

Central and Western Ohio medical equipment service

In Ohio, we commonly serve the Central and Western region, including Dayton, Columbus, Cincinnati, Springfield, and Lima. Coverage may also extend into nearby areas depending on the service request. If you need preventative maintenance or repair support for medical or lab equipment in this region, contact us and we’ll confirm scheduling options.

Lexington, Kentucky and surrounding areas

Our Kentucky coverage commonly includes Lexington, Frankfort, Somerset, Louisville, and nearby areas. If your facility needs dependable service for sterile processing, biomedical, anesthesia, or other supported equipment types, we’ll help you plan a maintenance strategy that reduces downtime and surprises.

Grand Rapids, Michigan and surrounding areas

In Michigan, we commonly serve Grand Rapids and surrounding areas, including cities such as Lansing, Midland, Flint, Farmington Hills, Westland, and Jackson. If you need a partner for preventative maintenance and repair that keeps your equipment reliable and your schedules on track, we’re ready to help.

How to Request Service (Fast)

We make it simple to get the process started—especially if your equipment is down or you’re planning preventative maintenance across multiple devices.

• Send a service request: Use our contact form to tell us what you have, what’s happening, and where you’re located.
• Share an equipment list: If you’re looking for a preventative maintenance plan, an equipment list helps us scope the visit and speed up quoting.
• Schedule onsite support: We coordinate timing to match your facility workflow, access requirements, and clinical schedule.
• Get documentation-ready service: We focus on clear service reporting so your team can support internal requirements and audits.

Common Equipment We Support (Examples)

Exact equipment coverage depends on service area and technician availability, but these are common examples of what we support.

Sterile processing equipment

• Sterilizers and autoclaves
• Large sterilizers
• Washer disinfectors (including glassware washers)
• Ultrasonic cleaners
• Steam generators and boilers

Biomedical equipment

• Patient monitors and ECG systems
• Exam tables and surgical tables
• OR and surgical lighting
• Stretchers and beds
• Electrosurgical units and related equipment

Anesthesia equipment

• Anesthesia machines and anesthesia monitors
• Preventative maintenance and corrective repairs aligned to manufacturer specifications
• Support for core anesthesia system components, from gas delivery and vaporizers to breathing circuits and monitoring

Imaging equipment

• C-arms
• R/F rooms
• Cath labs
• Portable X-ray systems
• Support with imaging-related performance issues, including image quality concerns and basic PACS/DICOM troubleshooting

Who We Help

We support a wide range of organizations that rely on medical and lab equipment uptime, including hospitals, surgery centers, outpatient clinics, laboratories, and other professional facilities. If you’re responsible for equipment reliability and compliance documentation, we’re built to be the partner you can call for both preventative maintenance and urgent repairs.

Please note: we do not provide services for personal equipment.

Field Service FAQ

Do you only work in the locations listed above?

Those are our primary field service areas. If you’re outside the listed regions, contact us anyway—we may still be able to help depending on the request and scheduling.

Do you offer preventative maintenance plans?

Yes. We provide preventative maintenance options and can tailor service to your equipment mix, usage, and operational needs. Sharing an equipment list helps us recommend the right approach.

Can you handle both planned maintenance and repairs?

Yes. We support scheduled preventative maintenance as well as repair service when equipment fails or performance drops.

Do you support documentation needs for facilities?

Yes. We prioritize clear service reporting and documentation to help your team support internal requirements and common regulatory expectations.

Ready to Confirm Coverage and Get a Quote?

Visit our Field Service Areas page to review coverage, then contact us to request service. We’ll help you confirm availability, scope the visit, and keep your equipment performing the way your team needs it to.

Contact us to request a maintenance or repair quote

Service Quote / Repair Request

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Zip Code *

Phone Number *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

The post Field Service Areas for Medical and Lab Equipment Maintenance and Repair appeared first on Auxo Medical.

When Virginia healthcare facilities need reliable, expert support for their medical and laboratory equipment, they turn to us — Auxo Medical. Headquartered in Richmond, VA, we have been a trusted equipment and service provider in the Mid-Atlantic region for over 25 years. Our team of highly skilled technicians and engineers specialize in preventative maintenance, inspections, calibrations, and repairs of medical and laboratory equipment, and we also offer a diverse range of new and refurbished equipment, ensuring that healthcare and research facilities have access to reliable, high-quality tools essential for their operations.

We enhance patient care and maximize equipment uptime in Virginia with our comprehensive medical equipment services. Our team of expert technicians provides rapid response repairs, preventative maintenance, and reliable equipment inspections, minimizing downtime and ensuring the smooth operation of your facility.

Whether you operate a hospital, ambulatory surgery center, outpatient clinic, dental practice, or veterinary facility, we are your all-in-one medical equipment solution in Virginia.

Serving Healthcare Facilities Across All of Virginia

We proudly serve the entire Virginia area — including Richmond, Chesterfield, Charlottesville, Roanoke, Newport News, Norfolk, Virginia Beach, Fredericksburg, Alexandria, Arlington, Washington D.C., and surrounding regions — with expert preventative maintenance, inspections, calibrations, and repairs for sterile processing (SPD), biomedical, anesthesia, and imaging equipment. Our headquarters in Richmond, VA enables efficient response times, with field technicians equipped for on-site service throughout these locales. No matter where your facility is located in the Commonwealth, our team is close by and ready to respond.

Our Medical Equipment Services in Virginia

Biomedical Equipment Maintenance & Repair

We service a wide range of biomedical equipment, including patient monitors, ECG machines, surgical tables, surgical lights, stretchers, electrosurgical units, exam tables, ventilators, and more. We maintain and repair biomedical equipment from many of the top and popular brands, ensuring your critical medical devices operate safely and efficiently. We offer a full range of services, including inspections, maintenance, repairs, and calibrations, providing complete diagnostic, repair, and calibration reports for your records. Our skilled Biomedical Equipment Technicians maintain and repair patient monitors, ECG machines, surgical tables, surgical lights, stretchers, electrosurgical units, ventilators, and more, ensuring your critical devices meet NFPA 99 and AAMI standards. Brands we support include GE Healthcare, Datascope, Philips, Mindray, Edan, Medtronic, Steris, Midmark, Skytron, Stryker, Hill-Rom, and others.

Sterile Processing Equipment (SPD) Service & Repair

We understand the importance of proper maintenance and repair for sterilizers, autoclaves, washer-disinfectors, and steam generators and keep your facility operating under Joint Commission standards. We provide maintenance and repair for sterilizers, autoclaves, washer-disinfectors, ultrasonic cleaners, and steam generators, ensuring your facility meets Joint Commission standards and operates without interruptions. Brands include Steris, Amsco, VPro, Getinge, Tuttnauer, Primus Spire, Scientek, Sharpertek, Belimed, Miele, Lancer, and more.

Anesthesia Equipment Service & Repair

Our factory-trained technicians provide maintenance, calibration, and repair of anesthesia machines, monitors, and booms. Our response includes leak testing, calibrations, and part replacements to get operating rooms back online fast. Our Biomedical Technicians maintain and repair equipment from Mindray, GE Healthcare, Datex-Ohmeda, Dräger, Penlon, and more. In addition, our biomedical service technicians receive direct training from GE and Mindray.

Medical Imaging Equipment Service

We provide specialized inspections and repairs for C-Arms, R/F rooms, catheterization labs, and portable X-ray systems. Our services are essential for a variety of facilities and practices, including hospitals, surgery centers, veterinarian clinics, and chiropractors. Our field service engineers offer equipment inspections, repairs, equipment de-installation and relocation, as well as PACS and DICOM troubleshooting. With our dedicated support, healthcare providers can maintain the reliability and efficiency of their imaging systems at an affordable price, ultimately enhancing patient outcomes and operational success.

Preventative Maintenance (PM) Plans in Virginia

Equipment downtime can cause disruptions in patient care and negatively impact the bottom line of healthcare facilities. Preventative maintenance plans can save time, money, and help keep patients safe. Equipment failures can happen without warning, leading to costly repairs or even replacements. Regular maintenance helps detect issues before they turn into major problems, saving healthcare facilities from expensive emergencies. Our factory-trained biomedical and sterile processing technicians provide scheduled inspections, calibrations, and performance testing to keep your equipment in peak condition and help you maintain regulatory compliance with organizations such as The Joint Commission and CMS. Experience significant cost savings with our comprehensive medical equipment maintenance programs. We offer a variety of service plans designed to reduce your overall spending by 30–40% on preventative maintenance (PM) contracts, labor costs, parts, and even equipment acquisition. Our efficient service model, combined with our competitive pricing and access to cost-effective refurbished equipment, allows you to optimize your budget without compromising the quality of care. We also offer loaner equipment for various categories, minimizing downtime and ensuring your facility remains operational.

Emergency Repair Services in Virginia

We know that when critical equipment goes down, every hour matters. Our team is built for fast response — whether that means dispatching a technician for an emergency repair or expediting a replacement unit from our inventory. We move quickly because your patients can’t wait. Whether you are in need of an emergency repair to avoid rescheduling patients or a preventative maintenance agreement to keep your operational costs fixed, let our service team handle these headaches for you.

New & Refurbished Medical Equipment Sales in Virginia

We provide Virginia healthcare facilities with access to a wide selection of new and refurbished medical and laboratory equipment. We offer a cost-effective alternative to purchasing new equipment directly from manufacturers, providing high-quality, reliable instruments at a fraction of the price. Our catalog includes anesthesia machines, patient monitors, surgical tables, infusion pumps, sterilizers, and much more. We partner with top brands in the industry to ensure that our customers have access to reliable and high-quality equipment. Some of the top brands available include Abbott, Alaris, Amico, GE, Philips, Steris, and Welch Allyn.

Why Virginia Healthcare Facilities Choose Auxo Medical

Our name, Auxo, comes from the Greek goddess of growth — and that’s exactly what we help our clients do. We grow with you, supporting your facility at every stage with equipment you can trust, service you can depend on, and pricing that respects your budget. We don’t just sell you equipment and disappear. We build long-term relationships with our clients, becoming an extension of your biomedical engineering or facilities management team. From initial consultation through installation, training, ongoing maintenance, and eventual replacement, we’re with you for the entire lifecycle of your equipment.

Here’s what sets us apart:

• AAMI Certified Technicians: We have AAMI Certified Biomedical Equipment Technicians (CBET) on staff and follow NFPA 99 and AAMI recommendations.
• Factory-Trained Engineers: Our service technicians are factory-trained and experienced across multiple equipment platforms and manufacturers. Whether it’s a complex anesthesia machine repair, a sterilizer validation, or a routine PM on a patient monitor, our team has the skills and knowledge to get the job done right the first time.
• Significant Cost Savings: Save 30–40% on PM contracts, labor, parts, and equipment costs with Auxo Medical.
• Compliance Documentation: Our team provides detailed service reports and maintenance records that support your accreditation and audit requirements.
• Wide Facility Support: Our client base includes hospitals and health systems, ambulatory surgery centers (ASCs), outpatient clinics and primary care offices, and dental practices.

Facilities We Serve in Virginia

With decades of experience, our team of technicians and engineers is dedicated to providing you with timely and efficient service to avoid equipment downtime and getting you back to focusing on patient care or research. We serve a broad range of Virginia facilities, including:

• Hospitals and Health Systems
• Ambulatory Surgery Centers (ASCs)
• Outpatient and Primary Care Clinics
• Dental Practices
• Veterinary Clinics
• Research and Laboratory Facilities
• Private Physician Practices

Contact Auxo Medical — Your Virginia Medical Equipment Partner

Partnering with Auxo Medical means reduced operational costs, improved efficiency, and a commitment to delivering exceptional patient care across Virginia.

Ready to get started? Visit our Virginia Medical Equipment Service Page to learn more, request a quote, or schedule service. You can also reach our team directly:

• Toll-Free: (888) 728-8448
• Local: (804) 233-4424
• Headquarters: 5401 Distributor Drive, Richmond, VA 23225
• Hours: Monday–Friday, 8:00 AM–4:30 PM

Service Quote / Repair Request

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Zip Code *

Phone Number *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

At Auxo Medical, we believe that reliable medical equipment shouldn’t be a luxury — it should be a given. Let us show Virginia healthcare facilities what a true equipment partner looks like.

The post Virginia’s Trusted Medical & Lab Equipment Maintenance, Repair, and Sales Partner appeared first on Auxo Medical.

We specialize in servicing sterile processing, biomedical, anesthesia, and imaging equipment from top brands such as Steris, Midmark, Tuttnauer, Skytron, Stryker, Hill-Rom, Welch Allyn, GE Healthcare, Philips, Medtronic, Getinge, Mindray, Edan, and more.

Our Field Service Areas

We proudly serve healthcare and research facilities across 10 states and the District of Columbia, offering prompt, reliable service to keep your critical equipment running smoothly. Please select from our available field service areas below or use the field service area locator using your facility name, address, state, or zip code.

Virginia

We serve the entire Commonwealth of Virginia, including Richmond, Chesterfield, Charlottesville, Roanoke, Newport News, Norfolk, Virginia Beach, Fredericksburg, Alexandria, Arlington, and surrounding regions. As our home state, Virginia is where our headquarters and core service teams are located, ensuring fast response times and deep local expertise.

Maryland & Washington, D.C.

Our Maryland and D.C. service area covers Baltimore, Glen Burnie, Annapolis, Frederick, College Park, Bethesda, Washington D.C., Arlington VA, Alexandria VA, and the surrounding areas. We provide preventative maintenance, inspections, calibrations, and repairs for sterile processing, biomedical, anesthesia, and imaging equipment throughout the region.

North Carolina

We offer comprehensive field service throughout North Carolina, supporting hospitals, surgery centers, and clinics with scheduled maintenance programs and emergency repair services for all categories of medical and lab equipment.

South Carolina

Our South Carolina service teams provide on-site maintenance, inspection, and repair services to healthcare facilities across the state, ensuring your equipment meets regulatory standards and operates at peak performance.

Tennessee

We serve Eastern Tennessee, including the Chattanooga area and surrounding communities. Our technicians provide the same high-quality preventative maintenance and repair services that facilities across our entire network rely on.

Georgia

Our Georgia coverage focuses on the Atlanta metro area and surrounding regions. We support hospitals, outpatient clinics, and laboratories with expert equipment maintenance and timely repair services.

Florida

We proudly serve the Central Florida region, including Tampa, St. Petersburg, Orlando, Lakeland, Sarasota, Fort Myers, West Palm Beach, Port St. Lucie, Melbourne, Daytona Beach, Ocala, and surrounding areas. We understand the importance of reliable medical equipment in this fast-growing healthcare market and provide prompt, efficient maintenance and repair services.

Ohio

Our Ohio service area covers Central and Western Ohio, including the Dayton area and surrounding communities. We deliver expert field service for a full range of medical and lab equipment.

Michigan

We serve the Grand Rapids area and surrounding regions in Michigan, offering preventative maintenance programs, equipment inspections, calibrations, and repairs to keep your facility running without interruption.

Kentucky

Our Kentucky service team is based in the Lexington area, covering Lexington, Frankfort, Somerset, and surrounding communities with comprehensive medical equipment maintenance and repair services.

Medical and Lab Equipment We Service

Our field service programs cover a wide range of medical and laboratory equipment categories, including:

• Sterile Processing Equipment — autoclaves, sterilizers, washer-disinfectors, and related systems
• Biomedical Equipment — patient monitors, ECG machines, electrosurgical units, surgical and exam tables, stretchers, hospital beds, and more
• Anesthesia Equipment — anesthesia machines, vaporizers, and ventilators
• Imaging Equipment — C-Arms, R/F rooms, catheterization labs, portable X-ray units, and ultrasound machines

We service equipment in hospitals, surgery centers, outpatient clinics, dental practices, veterinary facilities, research institutions, laboratories, agricultural operations, aerospace facilities, and food processing environments.

Our Service Offerings

• Preventative Maintenance Programs — Scheduled maintenance to extend equipment life and reduce unexpected downtime
• Field Service and Equipment Repair — On-site repair by certified technicians to minimize disruption to your operations
• Inspection and Calibration Support — Ensuring your equipment meets manufacturer specifications and regulatory requirements
• Emergency Service Response — Rapid response when critical equipment fails unexpectedly
• Service Contracts — Customized agreements tailored to your facility’s specific needs and budget
• New and Refurbished Equipment Sales — High-quality medical and lab equipment to complement our service programs

Why Choose Auxo Medical?

With over 25 years in the industry building, repairing and maintaining medical and lab equipment, our team delivers field maintenance and repair services that keep your equipment running efficiently without straining your budget. We have local service teams in your area, which means faster response times, personalized attention, and a deep understanding of regional healthcare needs.

Whether your equipment requires routine preventative maintenance, an urgent repair, or a full inspection and calibration, we are committed to providing cost-effective, timely, and professional service to ensure your medical and lab equipment operates at peak performance.

Contact Us

Ready to optimize your medical and lab equipment maintenance? Contact Auxo Medical today for a quote or consultation.

Service Quote / Repair Request

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Zip Code *

Phone Number *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

Headquarters: 5401 Distributor Drive, Richmond, VA 23225

Toll-Free: (888) 728-8448 Local: (804) 233-4424 Fax: (888) 420-9471

Hours of Operation: Monday–Friday: 8:00 am – 4:30 pm Saturday–Sunday: Closed

The post Field Service Areas for Medical & Lab Equipment Maintenance & Repair appeared first on Auxo Medical.

Who We Are

At Auxo Medical, we believe that reliable medical equipment shouldn’t be a luxury — it should be a given. Headquartered in Richmond, Virginia, we are a full-service medical and laboratory equipment company specializing in sales, field service, maintenance, and repair for healthcare facilities of every size. Whether you run a large hospital system, a single-room dental practice, or a veterinary clinic, we have the expertise, inventory, and technical team to keep your operations running smoothly.

Our name, Auxo, comes from the Greek goddess of growth — and that’s exactly what we help our clients do. We grow with you, supporting your facility at every stage with equipment you can trust, service you can depend on, and pricing that respects your budget.

What We Do

We offer a comprehensive range of products and services designed to meet the complex needs of modern healthcare environments. Our capabilities fall into two core categories: equipment sales and technical service.

New & Refurbished Medical Equipment Sales

Finding the right equipment at the right price is one of the biggest challenges healthcare administrators and procurement teams face. We make that process easier by offering both brand-new and professionally refurbished medical and laboratory equipment. Every refurbished unit we sell undergoes rigorous inspection, testing, and reconditioning to meet or exceed original equipment manufacturer (OEM) specifications.

Our equipment catalog includes, but is not limited to:

• Sterilizers and autoclaves — tabletop, floor-loading, and large-capacity steam sterilizers for sterile processing departments (SPD/CSSD), dental offices, veterinary clinics, and research laboratories
• Anesthesia machines and systems — new and refurbished anesthesia delivery systems from leading manufacturers, fully tested and patient-ready
• Surgical tables and lights — general and specialty surgical tables, examination tables, and overhead surgical lighting systems
• Patient monitors and vital signs equipment — multiparameter monitors, pulse oximeters, capnography units, and related accessories
• Imaging equipment — diagnostic imaging systems for clinical and veterinary applications
• Laboratory equipment — centrifuges, biological safety cabinets, incubators, and other essential lab instruments
• Washer-disinfectors and ultrasonic cleaners — critical components for instrument reprocessing workflows

By offering refurbished equipment alongside new inventory, we give our clients the flexibility to stretch their capital budgets without compromising on quality or patient safety.

Biomedical Field Service, Maintenance & Repair

Equipment downtime costs more than money — it disrupts patient care, delays procedures, and puts your team under unnecessary stress. That’s why we offer responsive field service and repair across our entire service territory.

Our factory-trained biomedical and sterile processing technicians provide:

• Preventive maintenance (PM) programs — Scheduled inspections, calibrations, and performance testing to keep your equipment in peak condition and help you maintain regulatory compliance with organizations such as The Joint Commission and CMS
• Emergency and on-demand repair — When something breaks, we respond quickly. Our team is equipped to diagnose and repair issues on-site, minimizing downtime and keeping your facility operational
• Installation and decommissioning — Professional installation of new and refurbished equipment, as well as safe removal and decommissioning of end-of-life systems
• Compliance and documentation support — Detailed service reports and maintenance records that support your accreditation and audit requirements

We service a wide array of equipment types, with particular depth of expertise in:

• Sterile processing equipment (SPD/CSSD) — sterilizers, washer-disinfectors, ultrasonic cleaners, cart washers, and related reprocessing systems
• Anesthesia delivery systems — vaporizer testing, flow sensor calibration, breathing circuit leak checks, and full system overhauls
• Biomedical equipment — general biomedical devices including patient monitors, defibrillators, electrosurgical units, infusion pumps, and more
• Imaging systems — diagnostic and clinical imaging equipment maintenance and repair

Industries and Facilities We Serve

One of the things that sets us apart is the breadth of facilities we support. We don’t serve only large hospital systems — although we certainly do that, too. Our client base includes:

• Hospitals and health systems — from community hospitals to large academic medical centers
• Ambulatory surgery centers (ASCs) — fast-paced surgical environments that require reliable, well-maintained equipment
• Outpatient clinics and primary care offices — smaller clinical settings that still demand professional-grade equipment and service
• Dental practices — sterilizers, autoclaves, and infection control equipment tailored to dental workflows
• Veterinary clinics and animal hospitals — anesthesia, sterilization, and monitoring equipment designed for veterinary applications
• Laboratories and research facilities — scientific and clinical laboratories that rely on precision instruments
• Industrial facilities — sterilization and decontamination equipment for industrial and manufacturing applications

No matter the size of your operation, we bring the same commitment to quality, responsiveness, and technical excellence.

Where We Serve

From our headquarters in Richmond, Virginia, we provide equipment sales and field service across a large and growing service territory spanning the Southeast, Mid-Atlantic, and parts of the Midwest. Our current coverage includes:

• Virginia (VA)
• Maryland and Washington, D.C. (MD/DC)
• North Carolina (NC)
• South Carolina (SC)
• Tennessee (TN)
• Georgia (GA)
• Florida (FL)
• Ohio (OH)
• Michigan (MI)
• Kentucky (KY)

This multi-state presence allows us to provide consistent, high-quality service whether your facility is in downtown Atlanta, rural eastern Kentucky, the suburbs of Detroit, or anywhere in between. We are continually expanding our reach to serve more communities and healthcare providers.

If your facility is located in one of these states, we encourage you to request a preventive maintenance quote or reach out to discuss your equipment needs. If you’re outside our listed territory, contact us anyway — we may still be able to help.

Why Healthcare Facilities Choose Auxo Medical

In a crowded market of medical equipment vendors and third-party service providers, we know you have options. Here’s why facilities across the East Coast and Midwest choose to work with us:

Cost-Effective Solutions Without Compromise

We understand the financial pressures healthcare organizations face. Our refurbished equipment program gives you access to top-tier devices at a fraction of the cost of buying new, while our flexible PM agreements help you plan and budget for ongoing maintenance expenses. We believe you shouldn’t have to choose between fiscal responsibility and clinical quality.

Deep Technical Expertise

Our service technicians are factory-trained and experienced across multiple equipment platforms and manufacturers. Whether it’s a complex anesthesia machine repair, a sterilizer validation, or a routine PM on a patient monitor, our team has the skills and knowledge to get the job done right the first time.

Speed and Responsiveness

We know that when critical equipment goes down, every hour matters. Our team is built for fast response — whether that means dispatching a technician for an emergency repair or expediting a replacement unit from our inventory. We move quickly because your patients can’t wait.

A True Partnership Approach

We don’t just sell you equipment and disappear. We build long-term relationships with our clients, becoming an extension of your biomedical engineering or facilities management team. From initial consultation through installation, training, ongoing maintenance, and eventual replacement, we’re with you for the entire lifecycle of your equipment.

How to Get Started

Getting in touch with us is easy. Whether you need a quote for new or refurbished equipment, want to set up a preventive maintenance agreement, or require emergency repair support, we’re here to help.

• Call us at (888) 728-8448— Speak directly with a member of our team to discuss your needs.
• Submit a service request — Use the service request form below to describe your situation and we’ll respond promptly
• Request a PM quote — Let us evaluate your equipment inventory and build a customized preventive maintenance program designed for your facility

We respond to every inquiry with the urgency it deserves — because we know your equipment is mission-critical.

Service Quote / Repair Request

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Zip Code *

Phone Number *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

Frequently Asked Questions

What types of equipment does Auxo Medical sell?

We sell both new and refurbished medical and laboratory equipment, including sterilizers, autoclaves, anesthesia machines, surgical tables, surgical lights, patient monitors, imaging systems, washer-disinfectors, ultrasonic cleaners, and laboratory instruments.

What does “refurbished” mean when it comes to your equipment?

Every refurbished unit we sell is thoroughly inspected, repaired as needed, tested, and restored to meet or exceed OEM performance specifications. We stand behind the quality of our refurbished equipment with warranties and ongoing service support.

What states does Auxo Medical serve?

We currently provide equipment sales and field service across Virginia, Maryland, Washington D.C., North Carolina, South Carolina, Tennessee, Georgia, Florida, Ohio, Michigan, and Kentucky.

Can you service equipment you didn’t sell to us?

Absolutely. Our field service team works on a wide range of medical and laboratory equipment regardless of where it was originally purchased. Contact us to discuss your specific equipment and service needs.

How quickly can you respond to an emergency repair request?

We prioritize emergency calls and work to dispatch a technician as quickly as possible. Response times vary by location and technician availability, but urgency is built into everything we do. Call us or submit a service request for the fastest response.

Do you offer preventive maintenance contracts?

Yes. We offer customizable preventive maintenance programs tailored to your facility’s equipment inventory, usage patterns, and compliance requirements. Request a PM quote to get started.

Let Us Support Your Mission

At the end of the day, our work exists to support yours. Every piece of equipment we sell, every repair we make, and every PM visit we complete is in service of a larger goal: helping you deliver safe, effective care to the patients and communities you serve.

We are Auxo Medical — your partner in medical equipment sales, service, and support across Virginia, the Mid-Atlantic, the Southeast, and the Midwest.

Ready to talk? Contact us today to request a quote, schedule service, or learn more about how we can support your facility.

Contact Us

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Phone Number *

Zip Code *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

The post Your Trusted Partner for Medical Equipment Sales, Service & Repair — Auxo Medical appeared first on Auxo Medical.

Auxo Medical provides preventive maintenance, repair, and inspections on a wide range of sterile processing, biomedical, anesthesia, and imaging equipment—with services varying by location.

This guide breaks down:

• What Auxo Medical services in the field (by equipment category)
• Where Auxo Medical’s technicians are currently deployed (by state/metro)
• How to confirm coverage quickly using the service-area locator and quote request workflow

What Auxo Medical Services in the Field (Equipment Categories)

Auxo Medical supports healthcare and research environments with field service across four core categories: Biomedical, Sterile Processing (SPD/CSSD), Anesthesia, and Imaging.

Biomedical equipment service (biomed inspections, calibrations, and repairs)

Common biomed devices Auxo Medical services include:

• Patient monitors & ECG
• Ultrasound machines
• Surgical & exam tables
• OR & surgical lighting
• Stretchers & hospital beds
• Electrosurgical units (ESU) and more

Auxo Medical services brands that includes GE Healthcare, Philips, Mindray, Edan, Medtronic, Midmark, Skytron, Stryker, Hill‑Rom, and more.

Auxo Medical also notes it has AAMI Certified Biomedical Equipment Technicians (CBET) on staff and follows NFPA 99 and AAMI recommendations. CBET is a biomedical equipment technician certification offered through AAMI’s certification program.

Sterile Processing (SPD/CSSD) equipment maintenance and repair

Auxo Medical’s sterile processing field service commonly covers:

• Full CSSD & SPD maintenance
• Small/medium/large sterilizers
• Tabletop autoclaves
• Washer disinfectors
• Ultrasonic cleaners
• Steam generators, boilers, and more

Brands include STERIS/AMSCO, Tuttnauer, Lancer, Spire/Primus, Scientek, Consolidated, Sharpertek, Belimed, BetaStar, Reimers, and more.

Auxo Medical also offers customized PM plans and service levels and helps facilities operate under Joint Commission standards.

Anesthesia equipment maintenance and repair

Anesthesia coverage includes:

• Anesthesia machines
• Anesthesia monitors
• Anesthesia booms
• Medical, dental, & veterinary anesthesia equipment
• Vaporizers and more

Auxo Medical’s Biomedical Technicians maintain and repair equipment from Mindray, GE Healthcare, Datex‑Ohmeda, Dräger, Penlon, and more. In addition, Auxo Medical’s biomedical service technicians receive direct training from GE & Mindray.

Imaging equipment service (including connectivity troubleshooting)

Auxo Medical’s imaging field support includes:

• C‑arms
• R/F rooms
• Catheterization labs
• Portable X‑ray systems and more

Auxo Medical’s Imaging Equipment Engineers assist with de-installation & relocation and PACS & DICOM troubleshooting as part of imaging support.

Imaging Equipment brands serviced include GE Healthcare (OEC 9800/9900, Innova 2100), Fuji, Siemens, Philips, Shimadzu, and more.

Auxo Medical Field Service Areas (States + Major Metros)

Auxo Medical offers s a service-area selector and also provides a field service area locator you can use with a facility name, address, state, or ZIP code to confirm coverage.

Below are the current field service regions and example cities/metros served.

Virginia (statewide + major metros)

Auxo Medical is headquartered in Richmond, Virginia, and serves Virginia including Richmond, Chesterfield, Charlottesville, Roanoke, Newport News, Norfolk, Virginia Beach, Fredericksburg, Alexandria, Arlington, and Washington, DC (area).

Maryland + Washington, DC (Baltimore–DC corridor)

Coverage includes Baltimore, Glen Burnie, Annapolis, Frederick, College Park, Bethesda, Washington, DC, plus nearby Northern Virginia areas.

North Carolina (major metros statewide)

Coverage includes Raleigh, Durham, Winston‑Salem, Charlotte, Fayetteville, Greensboro, Greenville, Wilmington, Asheville, and surrounding areas.

South Carolina (key SC metros + nearby cross‑border support)

Coverage includes Columbia, Florence, Myrtle Beach, Charleston, and also lists nearby regional metros such as Charlotte (NC), Savannah (GA), and Augusta (GA).

East & Central Tennessee (plus parts of AL/GA)

Auxo Medical provides service across East and Central Tennessee as well as Northeast Alabama and Northwest Georgia, including Knoxville, Chattanooga, Cookeville, Huntsville, and Dalton.

Atlanta Metro, Georgia

Coverage includes the Atlanta Metro Area and surrounding cities including Roswell, Gainesville, Athens, Alpharetta, Marietta, Carrollton, Macon, Newnan, Peachtree City, and Griffin.

Central Florida (Tampa–Orlando corridor and more)

Coverage includes Central Florida, listing Tampa, St. Petersburg, Orlando, Lakeland, Sarasota, Fort Myers, West Palm Beach, Port St. Lucie, Melbourne, Daytona Beach, and Ocala, and surrounding areas.

Central & Western Ohio (plus Muncie, Indiana)

Coverage includes Dayton, Columbus, Cincinnati, Springfield, and Lima, and also Muncie, Indiana and surrounding areas.

Notably, Auxo Medical’s Ohio service team provide expert sterile processing equipment maintenance/repair (sterilizers, autoclaves, washer-disinfectors, ultrasonic cleaners, steam generators, boilers).

Lexington, Kentucky (regional coverage)

Coverage includes Lexington, Frankfort, Somerset, Louisville, and also Cincinnati, OH and the surrounding region.

Grand Rapids, Michigan (and surrounding MI metros)

Coverage includes Grand Rapids, Lansing, Midland, Flint, Farmington Hills, Westland, and Jackson, and surrounding areas.

Preventive Maintenance Plans (Built for Uptime + Budget Control)

For sterile processing equipment, Auxo Medical provides a diverse array of service plans that can be customized to fit the clients diverse needs:

• Alpha: highest coverage with fixed investment
• Beta: more comprehensive with predictable investment
• Gamma: labor-only scheduled service (with Delta Plus including unscheduled calls)
• Delta: moderate investment aimed at reliability

Trust Auxo Medical as your service partner to stabilize uptime, reduce disruptions, and simplify compliance documentation for you.

What to Expect When You Request a Maintenance or Repair Quote

A clean, high-converting way to describe the process in your article:

1. Send a request with your facility details and ZIP (and a message describing the issue or PM need).
2. Upload an equipment list if you want an estimate for a preventive maintenance plan.
3. An Auxo Medical representative will follow up to discuss details and timelines to begin the agreement and work order.
4. A professional service technician/engineer will arrive on-site to perform the necessary service, bringing your equipment back online for safe and productive use.
5. For ongoing customers, Auxo Medical also provides a service portal for requests and record keeping (for SLA clients).

Auxo Medical provides service to hospitals, surgery centers, labs, clinics, etc. and does not provide service for personal equipment.

Why Facilities Choose Auxo Medical

Medical, lab, research and industrial facilities trust Auxo Medical because:

• Auxo Medical has AAMI Certified Biomedical Equipment Technicians (CBET) on staff
• Factory-trained, experienced technicians
• Support aligned with NFPA 99 & AAMI recommendations
• 24/7 emergency repairs available
• Depot repair on select equipment
• Save up to 50% vs OEM service providers
• Service portal access for SLA clients

Contact Information

Auxo Medical LLC (Headquarters)
5401 Distributor Drive, Richmond, VA 23225
Toll-Free: (888) 728-8448
Local: (804) 233-4424
Fax: (888) 420-9471
Hours: Monday–Friday 8:00am–4:30pm (closed Saturday–Sunday)

Request a Service Plan, Maintenance or Repair Quote

Service Quote / Repair Request

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Zip Code *

Phone Number *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

FAQ

Do you service personal/home medical equipment?

No—Auxo Medical does not provide services for personal equipment or residential equipment.

Do services vary by location?

Yes. Auxo Medical’s available services and categories vary by service area—so the fastest way to confirm support is to use the service-area locator or request a quote with your facility ZIP.

What kinds of equipment do you service?

Auxo Medical lists coverage across sterile processing (SPD/CSSD), biomedical, anesthesia, and imaging equipment, including items like sterilizers/autoclaves/washer-disinfectors, patient monitors & OR tables/lights, anesthesia machines, and C-arms/portable X-ray systems.

The post Auxo Medical Field Service Areas: On‑Site Medical & Lab Equipment Maintenance and Repair appeared first on Auxo Medical.

Keeping your medical and laboratory equipment operating at peak performance is essential for patient safety, regulatory compliance, and operational efficiency. Unexpected equipment downtime can disrupt workflows, delay procedures, and create costly setbacks for healthcare facilities. That’s why hospitals, surgery centers, clinics, laboratories, and specialty practices across the Eastern United States trust Auxo Medical for professional medical equipment inspections, maintenance, and repairs.

Auxo Medical provides comprehensive service solutions for biomedical equipment, sterile processing systems, anesthesia machines, and imaging equipment—delivering expert support at a fraction of typical OEM costs.

If you’re searching for medical equipment maintenance near me, biomedical equipment repair services, or preventative maintenance plans for sterilizers and autoclaves, Auxo Medical offers the expertise, responsiveness, and value your facility needs.

Why Medical and Lab Equipment Maintenance Matters

Medical and laboratory equipment represents a significant investment. More importantly, it plays a direct role in patient care and safety. Regular inspections, preventative maintenance, and timely repairs help:

• Extend equipment lifespan
• Prevent costly breakdowns
• Reduce downtime
• Maintain compliance with CMS, FDA, GMP, NFPA99, AAMI, and Joint Commission standards
• Improve operational efficiency
• Protect patients and staff

By partnering with Auxo Medical, healthcare providers gain peace of mind knowing their equipment is maintained by AAMI Certified Biomedical Equipment Technicians (CBETs) and manufacturer-trained professionals.

Comprehensive Medical Equipment Services

Auxo Medical delivers full-service maintenance, inspections, calibrations, troubleshooting, and repairs across a wide range of equipment categories.

Biomedical Equipment Maintenance & Repair

Auxo Medical specializes in servicing critical biomedical equipment, ensuring devices function safely and accurately in fast-paced clinical environments.

Equipment Serviced Includes:

• Patient monitors
• ECG machines
• Surgical tables
• Surgical lights
• Stretchers
• Electrosurgical units
• Exam tables
• Ventilators
• Defibrillators
• OR lighting systems

Their technicians meet or exceed NFPA99 and AAMI recommendations, providing detailed inspection and calibration reports for your records and compliance needs.

Brands Serviced:

Auxo maintains and repairs equipment from leading manufacturers, including:

• GE Healthcare
• Philips
• Mindray
• Medtronic
• Midmark
• Skytron
• Stryker
• Hill-Rom
• Welch Allyn
• Datascope
• Edan
• Steris and more

Loaner equipment is available for select categories, minimizing downtime and keeping your facility operational.

Sterile Processing Equipment Service

Sterile processing departments (SPD) rely on properly functioning sterilization systems to meet infection control standards. Auxo Medical provides preventative maintenance and repair services for:

• Sterilizers
• Autoclaves
• Washer-disinfectors
• Ultrasonic cleaners
• Steam generators and boilers

Routine servicing helps facilities remain compliant with Joint Commission standards while improving efficiency and extending equipment life.

Sterilization Brands Serviced:

• Steris / Amsco
• V-Pro
• Getinge
• Primus Spire
• Belimed
• Tuttnauer
• Consolidated
• Miele
• Basil
• Lancer
• BetaStar
• Sharpertek

Auxo’s preventative maintenance programs are designed to identify potential issues before they escalate into costly failures—saving facilities both time and money.

Anesthesia Equipment Service & Repair

Anesthesia equipment requires precision calibration and expert handling. Auxo Medical employs AAMI Certified Biomedical Equipment Technicians (CBETs) with factory training from GE and Mindray.

Services Include:

• Preventative maintenance to manufacturer specifications
• Corrective repairs
• Calibration and inspections
• Troubleshooting oxygen flow systems
• Vaporizer servicing
• Breathing circuit assessments
• Pressure system diagnostics (high, intermediate, low)
• Anesthesia monitor servicing

Anesthesia Brands Serviced:

• GE Healthcare
• Mindray
• Datex-Ohmeda
• Aespire
• Dräger
• Penlon

Auxo offers preventative maintenance plans equivalent to OEM programs—often at lower hourly repair rates—helping facilities control operating budgets without sacrificing quality.

Imaging Equipment Inspections & Repairs

Advanced imaging systems require specialized service expertise. Auxo Medical provides inspection, repair, and technical support for:

• C-Arms
• R/F Rooms
• Catheterization Labs
• Portable X-Ray Systems

Additional Imaging Services:

• Equipment de-installation
• Equipment relocation
• PACS troubleshooting
• DICOM support

Imaging Brands Serviced:

• GE Healthcare (OEC 9800/9900, Innova 2100)
• Fuji
• Siemens
• Philips
• Shimadzu

With dedicated field service engineers, Auxo ensures healthcare providers maintain reliable imaging systems while avoiding excessive OEM service costs.

Field Service Areas

Auxo Medical provides on-site service throughout:

• Virginia
• Maryland
• Washington, D.C.
• North Carolina
• South Carolina
• Georgia
• Florida (Central Florida – Tampa)
• Tennessee (Chattanooga & Knoxville)
• Ohio (Central & Western)
• Kentucky
• Michigan (Grand Rapids)

If your facility operates in these regions, Auxo’s experienced technicians are ready to respond quickly to service requests.

Preventative Maintenance Plans That Reduce Downtime

One of the most significant advantages of partnering with Auxo Medical is access to customized preventative maintenance (PM) plans.

Facilities with active service agreements report:

• Dramatic reductions in equipment downtime
• Faster response times
• Same-day repairs in many cases
• Improved equipment reliability
• Lower total cost of ownership (TCO)

Auxo’s scheduled maintenance programs often reduce downtime by as much as two-thirds compared to poorly executed third-party agreements.

The Auxo Medical Difference

1. Expertise You Can Trust

Auxo’s technicians are:

• Highly trained and experienced
• Regularly manufacturer-trained
• Knowledgeable in medical software and hardware systems
• Skilled in fast-paced clinical troubleshooting
• Compliant with CMS, FDA, and GMP regulations

Each service visit includes professional documentation, helping facilities stay survey-ready and audit-compliant.

2. Cost-Effective Service Plans

Auxo Medical delivers OEM-equivalent preventative maintenance at more competitive pricing. Clients consistently report significant cost savings without sacrificing quality.

Additionally, active service contract holders receive:

• 5% discount on equipment purchases
• Trade-in and liquidation value assessments
• Sales consultation and upgrade support

3. Secure Service Portal

Auxo’s Service Portal allows current service plan holders to:

• Manage equipment inventory
• Track service cases in real time
• Submit new work orders
• Access maintenance and repair history
• Print documentation for surveys or budget planning

This centralized digital system streamlines asset management and ensures compliance documentation is always accessible.

4. Equipment Upgrades & Refurbishment

Auxo Medical helps facilities extend the life of their assets through:

• Onsite upgrades
• Equipment refurbishment
• Removal and replacement of outdated systems
• Cost-effective alternatives to purchasing brand-new equipment

This approach maximizes capital budgets while improving operational performance.

A Reputation Built on Results

For over 15 years, healthcare leaders have trusted Auxo Medical for responsive service and dependable expertise. Clients consistently highlight:

• Lightning-fast response times
• Thorough preventative maintenance inspections
• Significant cost savings compared to OEM providers
• Professionalism and clear communication
• Personalized attention
• Creative solutions during renovations and transitions

Auxo Medical has become a preferred service provider for major healthcare partners and surgery centers across multiple states.

Core Values That Drive Excellence

Auxo Medical operates according to a strong set of core values:

• Integrity & Professionalism – Honest, respectful service at every interaction
• Customer Focus – Commitment to long-term partnerships
• Teamwork – Shared accountability and collaboration
• Safety First – Protecting staff and clients at all times
• Innovation & Improvement – Continuous growth and learning
• Environmental Responsibility – Recycling, reusing, and reducing waste

These values guide every maintenance visit, repair call, and customer interaction.

Request a Maintenance or Repair Quote

If your facility needs:

• Medical equipment inspections
• Preventative maintenance plans
• Biomedical equipment repair
• Sterilizer or autoclave service
• Anesthesia machine maintenance
• Imaging system troubleshooting

Auxo Medical makes it easy to request a quote. Facilities can submit a service request online and upload equipment lists for preventative maintenance estimates.

Please note: Auxo Medical does not provide service for personal equipment.

Partner with Auxo Medical Today

Reliable medical equipment service is not just about fixing machines—it’s about protecting patient safety, maintaining compliance, and preserving your investment.

Auxo Medical combines certified expertise, competitive pricing, comprehensive service offerings, and rapid response times to deliver exceptional value to healthcare facilities throughout the Eastern United States.

If you’re looking for a trusted partner for medical equipment inspections, maintenance, repairs, and parts, Auxo Medical is ready to support your facility with professionalism, efficiency, and integrity.

Contact Auxo Medical today to request a preventative maintenance or repair quote and discover why so many healthcare organizations rely on Auxo to keep their critical equipment running at optimal performance.

Service Quote / Repair Request

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Zip Code *

Phone Number *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

Δ

The post Medical and Lab Equipment Inspections, Maintenance, Repairs & Parts appeared first on Auxo Medical.