Description
Steris AMSCO Stage 3 Series 16″ 3013 Sterilizer
Refurbished Steris Amsco Model 3013 Steam Sterilizer includes: Stage 3 Controller with thermal printer, For Recess Mount, Chamber DIMS 16 x 16 x 26, Prevacuum (Class B), Thermal display with touchpad operation.
Features:
- Stage 3 controller with thermal printer
- Single Radial arm manual door (optional hinge)
- Recess Mount
- Interior chamber size of 16″ x 16″ x 26″
- Pre-vacuum configuration
- Thermal display with touch pad operation
- Hydrostatically tested pressure chamber
Warranty: 1 Year Parts & Labor, 6 months on PM Parts, 5 years on pressure vessel.
Additional Information:
- All refurbished steam sterilizers are fully disassembled and rebuilt using all OEM parts and procedures.
- Optional Stainless steel side panels available.
- Optional 30kW steam generator for electrical units.
- Standard Preventative Maintenance must be completed while unit is under warranty
- Additional freight and installation charges apply.
What is the difference between the two configurations: Gravity & Prevacuum?
- Gravity - designed for sterilization of liquids in flasks with vented closures, at 250°F (121°C), and also heat- and moisture-stabile goods at 270°F (132°C).
- Prevacuum – designed for efficient, high-volume processing of heat- and moisture-stabile materials, such as fabrics, wrapped hard goods, glassware or animal bedding, at 270°F (132°C). Prevacuum units will also run gravity-type cycles.
Gravity units operate by the gravity downward displacement air-removal principle. Prevacuum sterilizers have a chamber evacuation system for high-speed, high-volume sterilization. Both types use steam-under-pressure as the sterilizing agent.
Utility Requirements:
All utility supplies should have manual shutoffs located where the sterilizer connects to the utilities. Any utilities supplied above the sterilizer should be directed downward.
Cold Water (C)
- 80° F (26.7° C) maximum.
- A 1” minimum NPT fitting should be provided.
- Vacuum Sterilizer (3013 & 3023):
- 30 to 50 minimum dynamic/static psig (206.8 – 344.7 kPa)
- Peak consumption is 15 GPM; Average consumption is 164 GPH.
Cold Water (C) for Unit with Reimers Steam Generator
- ½” NPT
- 20 to 50 psig (137.9 – 344.7 kPa) dynamic
- Refer to recommended quality under cold water listing.
Steam (S) (House-Steam Units only)
- A steam trap should be installed in the line immediately upstream of the utility shutoff.
- A ½” NPT fitting should be available.
- 50-80 psig (344.7 – 551.6 kPa) dynamic/static
Drain (D)
- 1- ½” ODT drain terminal and floor drain capable of handling peak water consumption.
- The drain line must be connected to a receiver capable of withstanding 140° F water otherwise a drain cooler will be required.
Electricity (E)
- Outlet box for 120 VAC, 50/60 Hz, 1 Amp (5.5 Amps for electric units) electric service to the sterilizer controls.
Generator Electricity (G) (Electric Units only)
- Steam Generator
- Outlet box for 120 VAC, 60 HZ, 7 Amp electrical service for the steam generator control.
- Terminal box for 208 or 480 Volt, 50/60 Hz, 3-phase service to the optional integral electric steam generator heaters.
All configurations require a ground.
