Description
With today’s hectic pace, tight budgets and patient safety concerns, you need an infusion pump that serves both you and your patients, helping to maximize valuable resources and enhance your clinical practice. You’ll find the Plum 360 Infusion Pump is unlike any other, with a unique combination of features that empowers you to deliver optimal healthcare – today and tomorrow.
Plum 360 Infusystem
Features:
- Dimensions
- Approx. 8” H x 8” W x 6” D (0.20 m H x 0.20 m W x 0.15 m), excluding pole clamp extrusion and power cord storage
- Weight
- Approx. 10 lbs. (4.5 kg) with battery
- Battery Life
- Approx. 3 hours at up to 125 mL/hr on a single line, or delivers at least 250 mL if > 126 mL/hr
- Power Requirements
- 120 V~, 50 to 60 Hz, 50 VA
- Recharge Time
- Approx. 8 hours with the device operating at 125 mL/hr on one line
- Volume Range
- 0.1 to 99.9 mL (in 0.1 mL increments), 100 to 9999 mL (in 1 mL increments)
- Delivery Rate Accuracy
- ± 5% (1 to 999 mL/hr), ± 10% (0.1 to 0.9 mL/hr)
- Delivery Rates
- Lines A and B: 0.1 to 99.9 mL/hr (in 0.1 mL increments), 100 to 999 mL/hr (in 1 mL increments)
- Concurrent Delivery: 0.5 mL/hr minimum for each line
- PlumSet: 500 mL/hr cumulative (A+B) maximum
- KVO: 1.0 mL/hr or the last delivery rate on the associated line, whichever is less
- Delivery Units
- mL/hr, mcg/kg/min, mcg/min, mcg/kg/hr, mg/min, mg/m2, mg/m2/min, mg/m2/hr, mg/kg, mg/kg/hr, mg/hr, ng/kg/min, g/hr, mEq/hr, mUn/min, units/min, units/hr, units/kg/hr
- System Alarms
- Occlusion, Air-in-Line, Low Battery, Door Opened While Pumping, Lockout Violation, VTBI Complete, Valve/Cassette Test Failure, Nurse Call, No Action, Programming Not Complete
- Occlusion Alarm Pressure
- Distal Pressure Limit (without alarm): 1-15 psig (default 6 psig)
