Description
The TTDC-1000 Table-Top drying cabinet, (TTDC) is manufactured with quality materials designed for ease of use and long-lasting durability. The overall design offers a variety of drying uses, all with a focus on the drying of a variety of medical equipment. The TTDC also offers easy access to major components for removal and installation of replacement parts.
Electrical Configuration:
The TTDC runs on 120 volt power using a single 15 amp breaker. The TTDC is shipped with a standard 3 prong electrical plug that’s ready to be plugged into a standard home outlet.
Heating Elements:
The TTDC uses one, 1200 watt 120v heating element. The design allows ease of maintenance if removal and replacement of the heating element is required. The TTDC is capable of heating to 150° at a 70° outside air temperature. The heater air outlet, constructed of 20 gauge steel, directs heated air through the cabinet.
Blower Motor:
The TTDC blower motor is bolted to the top frame under the upper cover. It uses an axial fan that blows air across the heating elements.
Ventilation: The TTDC ventilation is at the users discretion but the TTDC has a 4” opening in the top, centered and 5” inboard of the left sidewall to accept 4” ducting if desired by the user. Evacuation of the moist air can be performed in two ways 1.) Waste air from the dryer cabinet is led to an evacuation duct or an outlet in the wall using a vent hose, which is recommended. 2.) Ventilation out into the room where the dryer cabinet is positioned. If there is adequate space above the drying cabinet (i.e. 10 ft. ceiling) then venting is not required.
Induction Air: There is a 7 1/2” x 2” opening centered, 1.75”- 3.75” from right sidewall. It is recommended to allow 4” above the top height for adequate air induction and at least 2” around each side..* For both adequate incoming air & exhaust ventilation, it is recommended to have a minimum of 4” of clearance above the top of the cabinet to any ceiling, and at least 2” of clearance from any walls from the back & sides of the cabinet. The minimum suggested enclosed space to install the cabinet within is 40.5”H x 27.5”W x 26.5”D, if the unit will be used in a confined space (with an open front area only, or a door that can be opened during use).
Electronic Touch Control Panel:
The TTDC has a touch-sensor electronic control panel mount- ed on the front top panel above the door. The control panel senses, displays and controls temperature and run time around five preset temperatures.
Temperature Settings:
The push of the temperature button on the control panel allows the selection of one of five preset during temperatures with associated LED indicators. The five different drying settings are; air only, low, medium, normal, high. There is also the option of an alarm to sound when the drying cycle is over.
Fan (No Heat) Low (105°F) Medium (120°F) Normal (130°F) High (150°F)
Time Settings:
The push of the time buttons on the control panel selects the hours of run time from 0-9:45 minutes.
• Exhaust Ventilation: use of ducting at user’s discretion
• Electric Connection: 120V 15 amp breaker the cord is centered on back panel and is 12’ long
• Width: 23.43”
• Depth: 24.5”
• 46.54” with door open
• Height: 36.5”
• Net Weight: 100 lbs
• Shipping Weight: 165 lbs
