Description
The SharperTek Model STM-1500 is a single tank, tabletop product for cleaning medical instruments using ultrasonic energy in a detergent solution.
This machine has means to flush the ID of cannulated instruments using an ID flush tray. The STM-1500 is auto fill/drain. It utilizes a touchscreen control
Stainless Steel Construction:
All exterior panels are type 304 stainless steel with a #4 polished finish. The sonic cleaning chamber is constructed of low carbon, 12-gauge, type 316L mirror finish stainless steel for increased corrosion resistance.
Automated Controls and HMI Display:
A Programmable Logic Controller (PLC) located behind the front access door is used to program & control adjustable parameters as well as maintain control of automated functions.
UV Light and Ozone Swivel Lid*:
Provides and extra layer of cleanliness. Feature can be turned ON/OFF
Pressure air Blow Off*:
Blow-Off cannulated instruments post rinse cycle. Feature can be turned ON/OFF- air purges ID of cannula
Automatic Fill*:
Controller will automatically fill the sonic tank once cycle starts
Automatic Rinse and Spray Cycle*:
Controller will automatically fill the sonic tank without chemistry, sonicates and spray rinse.
Liquid Level Sensors:
A low liquid level sensor is provided to assure the heaters are covered with water and a high level sensor is provided to assure proper liquid level depth for ultrasonic cleaning.
Overflow Protection:
This product is equipped with built-in overflow to drain.
Automatic Cycle Start & Stop*:
Controller will automatically initiate start of ultrasonic cavitation once the cycle starts and the tank is full.
Automatic Cycle Timer:
Controller will automatically run programmed cycle time.
Automatic Solution Heater:
Thermostat automatically controls heater and maintains tank solution at pre-set temperature.
Automatic Detergent Dosing*:
Controller will automatically dispense a pre-set amount of sonic detergent into the water as the tank fills.
Automatic Drain*
Controller will automatically open the drain valve when the
• UL 61010A-1
• Seismic Anchorage Per California Building Code 2001 • Uniform Plumbing Code
• OSHA Standards forNoise Emissions
• FCCStandardsForRadiatedInterference
1. AAMI TIR12:2010 Designing, Testing, and Labeling Reusable Medical Devices for Reprocessing in Health Care Facilities.
2. AAMI TIR30:2011 A Compendium of Processes, Materials, Test Methods, and Acceptance Criteria for Cleaning Reusable Medical Devices
Specs:
- Overall Cabinet: 38″ L x 22″ W x 19.5″ H Table Top Unit
- Working Height: Table Top Unit
- Dry Weight:120 lbs
- Operating Weight: 150lbs
- 120 Pounds
- 150 Pounds
SONIC CLEANING CHAMBER:
- Overall Size: 28″ Lx 14″W x 8.6″ H
- Liquid Volume: 10 Gal
- Effective Liquid Depth: 6″
- Maximum Tray Size: 27.5″ L x 13″ W x 4″ High
- Maximum Load: 35 Pounds (15.9 kg)
ULTRASONICS:
- Transducer Type: Piezoelectric
- Quantity: 20
- Tank Bonding: Ultrasonic Epoxy
- Generator Output: 1,000 Watts
- Frequency: 40kHz
Electrical: 208V 240V 50/60H, SP, 6.2Amps
Includes:
Qty 1 Standard instrument Baskets with wire mesh
Qty 1 SteraZine Detergent 4 Gallons
Qty 1 SDL Verify Software
If Robotic instrument (Da Vinci) flush trays required add: AM-STM1500-IFB
