Fraud Blocker
Quality Assurance - Refurbished Sterilizer | Auxo Medical

Troubleshooting an Autoclave: A Comprehensive Guide

August 21, 2023
, , , , , Articles

Autoclaves, the powerful machines that use steam under pressure to sterilize equipment and other objects, are essential in a range of industries, from healthcare to food processing. However, like any piece of equipment, they can sometimes encounter problems. This article will guide you through the troubleshooting process for an autoclave, helping you to identify and resolve common issues.

Common Autoclave Problems and Solutions

1. Autoclave Won’t Start

If your autoclave refuses to start, the first step is to check the power supply. Ensure the machine is plugged in and the circuit breaker hasn’t tripped. If everything seems fine with the power, the issue could be with the door. Autoclaves have safety features that prevent operation if the door isn’t properly sealed. Check the door seal for any damage and ensure it’s closed tightly.

2. Slow Warm-Up

If your autoclave takes longer than usual to warm up, the problem could be due to a few factors. First, check the water level in the reservoir. An insufficient water level can cause the autoclave to heat up slowly. If the water level is fine, the issue could be a malfunctioning heating element or a faulty thermostat. In this case, consult the manufacturer’s manual for instructions on how to test and replace these components.

3. Incomplete Sterilization

If your autoclave isn’t achieving proper sterilization, check the following:

  • Loading: Ensure items are loaded correctly, with enough space between them for steam to circulate. Overloading the autoclave can lead to incomplete sterilization.
  • Cycle Time and Temperature: Verify that the correct cycle time and temperature settings are being used for the items being sterilized. Consult your autoclave’s manual for recommended settings.
  • Steam Quality: Ensure the steam being produced is of good quality. Poor steam quality can result from using hard water, which can leave mineral deposits in the autoclave, affecting its performance. Use distilled water to avoid this issue.

4. Wet Loads

If you find that items are still wet after a sterilization cycle, the issue could be related to the drying phase. Check the following:

  • Drying Time: Ensure the drying time is set correctly and allow for adequate drying time after the sterilization cycle.
  • Door Gasket: Inspect the door gasket for damage or leaks, as this can allow steam to escape and prevent proper drying.
  • Ventilation: Ensure the autoclave is well-ventilated and not placed in an enclosed space, as this can hinder the drying process.

5. Error Codes

Many modern autoclaves display error codes when something goes wrong. These codes can help you identify the specific issue with your machine. Consult your autoclave’s manual for a list of error codes and their corresponding meanings.

Regular Maintenance for Optimal Performance

To keep your autoclave functioning optimally, regular maintenance is crucial. Here are some maintenance tasks you should perform routinely:

  1. Clean the Chamber: After each use, wipe the chamber with a soft cloth to remove any residue. Regularly clean the chamber with a non-abrasive cleaner to prevent buildup of dirt and grime.
  2. Inspect the Door Gasket: Check the door gasket for damage, such as cracks or wear, and replace it if necessary. A damaged gasket can lead to leaks and poor sterilization.
  3. Clean the Water Reservoir: Empty and clean the water reservoir regularly to prevent mineral deposits and bacterial growth. Use distilled water to fill the reservoir.
  4. Check Filters and Valves: Inspect and clean filters and valves as recommended by the manufacturer. Replace them if necessary.
  5. Lubricate Moving Parts: Lubricate door hinges, latches, and other moving parts as recommended by the manufacturer to ensure smooth operation.

When to Call a Professional

While many autoclave issues can be resolved through troubleshooting and regular maintenance, there are instances when you should seek the help of a professional:

  1. Electrical Issues: If you suspect an electrical problem, such as a malfunctioning heating element or thermostat, it’s best to consult a professional technician to avoid the risk of injury or further damage to the autoclave.
  2. Persistent Problems: If you’ve tried troubleshooting and the issue persists, it’s time to call a professional. They can diagnose and resolve the problem more efficiently.
  3. Calibration: Autoclaves should be calibrated regularly to ensure accurate temperature and pressure readings. This process should be performed by a professional to ensure proper calibration.

Call the Professionals at Auxo Medical for Autoclave Preventive Maintenance and Repair

If you are in need of autoclave preventive maintenance or repair services, look no further than Auxo Medical. With our team of highly skilled professionals, we specialize in providing top-notch services to ensure the optimal functioning of your autoclave equipment. Whether you need routine maintenance to prevent any potential issues or immediate repair work, Auxo Medical has got you covered. We understand the importance of having a reliable autoclave system in various industries, such as medical, dental, and laboratory settings. By entrusting your equipment to our professionals, you can have peace of mind knowing that they will diagnose and address any issues efficiently and effectively. Don’t compromise on the quality and functionality of your autoclave – call the professionals at Auxo Medical today! Toll-Free: (888) 728-8448.

 

What is a Washer-Disinfector and How Does it Work?

August 14, 2023
, , , , , , , , , Articles

What is a Washer-Disinfector and Why is it Important?

Tiva 8 Narrow Design Undercounter Washer DisinfectorA washer-disinfector is an essential piece of equipment in medical, laboratory, and clinic settings. It is a machine that combines the processes of washing and disinfecting to ensure optimal cleanliness of medical equipment, surgical instruments, glassware, and other tools used in these settings.

Washer-disinfectors are important because they help prevent the spread of infections. In healthcare facilities, infection control is crucial to protect patients from exposure to pathogens. Sterilization of instruments and equipment plays a significant role in preventing the transmission of diseases from one patient to another. A washer-disinfector can provide a high level of assurance that items are clean and safe for use by removing both visible dirt and microorganisms that may be present on surfaces. Overall, this makes it easier for healthcare providers to maintain their cleanliness standards while keeping patient safety at the forefront.

The Benefits of Using a Washer-Disinfector in Medical, Laboratory, and Clinic Settings

A washer-disinfector is a crucial piece of equipment for maintaining cleanliness in medical, laboratory, and clinic settings. One of the key benefits of using a washer-disinfector in these environments is that it can effectively eliminate harmful bacteria and microorganisms from surfaces that cannot be sterilized with other methods.

Another major benefit of using a washer-disinfector is that it provides a more efficient method for cleaning and disinfecting medical equipment. Compared to manual cleaning methods, using a washer-disinfector can reduce the risk of cross-contamination and save time for healthcare professionals who need to prioritize patient care.

Investing in a high-quality washer-disinfector can provide numerous benefits for maintaining cleanliness and safety in medical facilities. By effectively eliminating harmful bacteria and saving time on cleaning procedures, healthcare professionals can focus on providing optimal care for their patients without worrying about the spread of infection or disease.

How Does a Washer-Disinfector Work?

A washer-disinfector uses a combination of high-pressure water sprays, detergents, and heat to remove debris, bio-burden, and microorganisms from the equipment. The process typically begins with a prewash cycle using cold water to remove larger debris. The next step involves using hot water sprays with detergents to clean the items. Once the cleaning is complete, the washer-disinfector moves into the disinfection phase where it heats up water to temperatures above 82 degrees Celsius for a specific period of time to kill any remaining microorganisms.

The final step in this process is drying by using either forced air or vacuum drying methods depending on the type of equipment being cleaned. By utilizing this multi-step process, washer-disinfectors effectively eliminate cross-contamination and can be relied upon to produce highly sanitized supplies for use in medical procedures or experiments.

The Advantages of Investing in a New or Refurbished Washer-Disinfector

Getinge 46 Washer-DisinfectorAs an essential piece of equipment for medical, laboratory, and clinic settings, investing in a new or refurbished washer-disinfector has several advantages that can benefit your facility in multiple ways. One major advantage of investing in a new or refurbished washer-disinfector is the reduced risk of contamination and infection. A sterilizer may not be enough to fully eliminate contaminants, but a washer-disinfector works differently by using chemicals, high-pressure water, and heat to thoroughly clean and disinfect items. This not only protects patients from infection but also protects healthcare providers from exposure to hazardous substances.

While purchasing a new machine may not be finically feasible, a refurbished washer-disinfector may be a cost effective solution for your facilities needs. By opting for a refurbished machine, facilities can save a significant amount of money while still meeting their requirements. These refurbished washers have undergone a thorough inspection, repair, and cleaning process to ensure they are in excellent working condition. With the affordability of refurbished washer-disinfectors, facilities can invest their budget in other essential areas, making it a practical choice for those looking to make the most of their resources.

Overall, investing in a new or refurbished washer-disinfector has significant benefits for both patient care and facility management needs. With reduced contamination risks and cost savings opportunities, this investment is well worth considering for any healthcare provider looking to provide top-quality care while maintaining an efficient operation.

Regular Maintenance: Preventative Maintenance Plans for Your Washer-Disinfector

A washer-disinfector is a critical piece of equipment that must be maintained regularly to ensure optimal performance. Investing in a preventative maintenance plan through Auxo Medical can save you money in the long run, reduce downtime and improve overall efficiency. Regular maintenance of your washer-disinfector will extend its lifespan, prevent costly breakdowns and reduce the risk of contamination.

Preventative maintenance plans typically include regular inspections, cleaning, and calibration of your machine. During an inspection, our technicians will check for any wear and tear on parts that may need replacement soon. Cleaning involves removing any debris, grease or residue from the machine to prevent the buildup of bacteria or other contaminants. Calibration ensures that your machine is working within its specifications and performs optimally.

With regular maintenance and preventative care, you can avoid unexpected breakdowns or costly repairs. Additionally, by investing in preventative care plans with professional technicians such as those offered by Auxo Medical, you are ensuring that your staff remains safe while operating this vital equipment.

Emergency Repair Services for Your Washer-Disinfector

Despite regular maintenance and care, washer-disinfectors can experience sudden malfunctions that require immediate repair. When this happens, it’s important to contact a Auxo Medical for quick and reliable emergency repair services.

Emergency repair services are designed to address critical issues quickly and efficiently, minimizing downtime and preventing further damage. A skilled technician will come to your facility as soon as possible, diagnose the problem, and provide a prompt solution.

At Auxo Medical, we understand how important it is to have access to emergency repair services when you need them most. That’s why we offer 24/7 emergency repair services to our clients. Our team of technicians is highly trained and experienced in repairing all types of washer-disinfectors from different manufacturers.

No matter the issue with your machine, we have the expertise and resources needed to get it back up and running as soon as possible. Don’t let an unexpected breakdown impact your operations or compromise patient safety; trust Auxo Medical for all your washer-disinfector repair needs.

Other Sterilization Equipment: Autoclaves and Sterilizers

In addition to washer-disinfectors, there are other sterilization equipment options available for medical, laboratory, and clinic settings. Autoclaves and sterilizers are two popular options that offer a different way of achieving sterile instruments and equipment.

Autoclaves use high-pressure steam to kill bacteria, viruses, fungi, and other microorganisms on equipment surfaces. They work by increasing the temperature inside the chamber to above 100°C, which creates steam that penetrates the industrial-grade plastics or metal walls of the device being sterilized. It is an effective method for killing bacteria and spores.

Sterilizers may use also use chemicals such as hydrogen peroxide or peracetic acid to achieve disinfection or sterilization. They work by releasing vaporized chemicals into the device chamber until it reaches a certain concentration level that kills microorganisms at different levels of complexity.

While washer-disinfectors have become popular in recent years due to their efficiency at cleaning instruments with minimal human intervention, autoclaves and sterilizers remain staples in many medical settings. Each has its own benefits depending on the nature of your operation. If you’re unsure which option is best for your specific needs, consult with one of  our trusted professionals who can help guide you in selecting the right solution.

Contact Auxo Medical for Your New or Refurbished Washer-Disinfector as well as Maintenance and Repair

If you’re in the market for a new or refurbished washer-disinfector, look no further than Auxo Medical. Our team is proud to offer a wide selection of high-quality washer-disinfectors designed to meet your specific needs and budget requirements, as well as expert maintenance and repair services to keep your equipment in top working condition. Contact us today to learn more about our products and services.

Sterile Processing Equipment Repair and Maintenance | Auxo Medical

Autoclave Maintenance & Repair by Auxo Medical

July 24, 2023
, , , , , Articles

In the world of medical equipment, autoclaves play a crucial role in maintaining the highest standards of sterilization. However, proper maintenance and regular repair are necessary to ensure their longevity and optimal performance. In this article, we’ll delve into the importance of autoclave maintenance and repair and how Auxo Medical can provide the necessary services to keep your equipment functioning at its best. From identifying common issues to sharing best practices, we’ll explore everything related to autoclave maintenance and repair. By the end of this article, you can rest assured that your autoclave is in safe hands with Auxo Medical.

Importance of Autoclave Maintenance

Autoclaves are essential tools in various industries, including healthcare and pharmaceuticals. These machines use high-pressure steam to sterilize equipment, instruments, materials, and other items to prevent the spread of infectious diseases. However, like any other equipment, autoclaves require regular maintenance to function correctly and provide reliable results. Neglecting preventive maintenance can lead to several problems that can affect the performance of the machine and compromise its safety. The importance of autoclave maintenance cannot be overstated. Regular servicing ensures that autoclaves function at peak efficiency and deliver consistent results. Proper maintenance helps prevent downtime, reduce repair costs, enhance safety for patients and staff, extend the lifespan of autoclaves and promote compliance with regulatory requirements. By investing in preventive maintenance for your autoclave machines regularly, you can avoid costly repairs down the road while ensuring efficient sterilization cycle times for your patients’ safety.

Investing in autoclave maintenance is crucial to ensure that it works reliably at all times and produce accurate test results consistently. It also helps minimize downtimes due to technical issues or breakdowns which would cost you both time and money in terms of repairs or replacements. Therefore prioritizing preventive maintenance programs is an excellent investment that will ultimately pay off by ensuring patient satisfaction while improving compliance with healthcare standards across different industries.

Common Autoclave Problems

Autoclaves are essential machines used in various industries for sterilization of instruments, glassware, and other laboratory materials. Despite their importance, autoclaves are not immune to problems or malfunctions. Some of the most common autoclave problems include leakage of steam, improper sterilization of materials, and failure to reach the required temperature for effective sterilization.

Leakage of steam from an autoclave can be caused by various factors such as damaged gaskets or loose fittings. This problem can affect the efficiency of the autoclave leading to poor sterilization results. Improper sterilization is another common problem that may result from inadequate loading techniques or failing to follow correct procedures for loading instruments and materials onto the autoclave racks.

Failure to reach the required temperature is also a common issue that may occur in an autoclave. The root cause may be due to faulty installations or damaged heating elements that need repair or replacement. Regardless of the problem experienced with an autoclave, it is important for professionals to diagnose and resolve these issues promptly so as not to impact research operations negatively and risk contamination of sterile supplies.

Autoclave Maintenance and Repair Professionals

Autoclaves are highly complex and technical pieces of equipment that require professional maintenance and repair services. As such, it is important to work with autoclave maintenance and repair professionals who have the necessary expertise to keep your equipment in top condition. At Auxo Medical, we pride ourselves on having a team of highly skilled technicians who specialize in autoclave maintenance and repair. Our team has years of experience working with a wide range of autoclave models, and we are well equipped to handle any issue that may arise.

Whether you need routine maintenance or emergency repairs, our team is available 24/7 to ensure that your equipment is always in working order. We understand how important your autoclave is to your operations, which is why we always strive to provide prompt and effective service to minimize downtime for our clients.

Autoclave Maintenance Scheduling

Autoclaves are invaluable tools for maintaining hygiene and sterility in medical facilities. To ensure that these critical pieces of equipment function optimally, it is essential to adhere to strict maintenance schedules. Autoclave maintenance scheduling involves routine checks and inspections of the machine’s functionality, such as water levels, temperature settings, and pressure gauges. At Auxo Medical, we emphasize the importance of regular autoclave maintenance scheduling. Our team of experts will work with you to set a preventive maintenance plan and schedule to prevent potential malfunctions or breakdowns. These routine checks can help detect any issues early on and ensure that your autoclave is operating at peak performance.

Properly maintaining your autoclave can also extend its lifespan, saving you money in replacement costs over time. By following a strict maintenance schedule with the help of professionals like those at Auxo Medical, you can ensure that your facility’s sterilization needs are met consistently and without interruption.

Contact Auxo Medical for Autoclave Preventive Maintenance and Repair

If you are in need of autoclave preventive maintenance or repair services, look no further than Auxo Medical. With our expertise and experience in the medical equipment industry, we are the go-to company for all your autoclave needs. Our team of skilled technicians is trained to handle a wide range of issues, ensuring that your autoclave is running at its optimal performance. From routine maintenance checks to emergency repairs, Auxo Medical is committed to providing prompt and reliable services. Contact us today to schedule an appointment and ensure the longevity and efficiency of your autoclave.

Auxo Medical’s Refurbishment Process – Steam Sterilizers

April 13, 2023
, , , Articles
Auxo Medical Refurbishment Process - Steam Sterilizers

The Benefits of Purchasing a Refurbished Steam Sterilizer from Auxo Medical

Purchasing a refurbished sterilizer from Auxo Medical comes with a variety of benefits. Refurbished units are a cost-effective solution for healthcare facilities, laboratories and Sterile Processing Departments (SPD) that may not have the budget for brand new sterilizers. With over 25 years of process development and improvement, there is only one way to refurbish a steam sterilizer. A true REBUILD of the unit. Each machine goes through a rigorous refurbishment and rebuild process to bring it back to “like new” condition. Upon completion of the refurbishment procedure, each unit goes though a detailed quality assurance process to ensure it meets manufacturer and industry standards for performance and safety. In addition, all of our fully rebuilt steam sterilizers come with like new warranties and preventative maintenance and repair support options, so you can expect the same experience as if it were new.

The Following are the Procedures of the Auxo Medical Refurbishment Process:

Units are completely disassembled at the component level:

Sterilizer Disassembled - Refurbishment Process | Auxo Medical

Vessel and Frame Refurbishment:

  • Pressure Vessel Chamber or “Core” is bead blasted and hydrostatic pressure tested
  • Cast Iron Framing/Stand is bead blasted and repainted with rust resistant paint, or replaced completely.
  • Unit is fitted with new Insulation Blanket encasing the chamber/core.
Chamber - Before and After | Auxo Medical

Plumbing Rebuild:

All of the below are rebuilt:

  • Rebuild Steam Manifold
  • Rebuild Exhaust Manifold
  • Rebuild Water Manifold

Upper Plumbing:

New:

    • Air Filters
    • Pressure Gauges
    • Pressure transducer
    • Ball Valves
    • Screens

Rebuilt:

    • Pressure Regulator
    • Strainers

Lower Plumbing:

New:

    • Chamber Sensor
    • Ball Valves
    • Pressure Switch
    • Screens
    • O-Rings
    • RTD, Jacket, Chamber, Drain

Rebuilt:

    • Check Valves
    • Venturi Water Ejector
    • Heat Exchanger
    • Strainers
    • Steam Traps
Sterilizer Plumbing Refurbishment | Auxo Medical

Doors:

  • Disassembled, cleaned, bead blasted if necessary
  • 400 series and Century Sterilizers, vertical power door:
    • Rebuilt with new Door Cable, Sensors, Stainless, and recertified Motor
  • Eagle 3000, radial handwheel door:
    • Rebuilt with refinished nickel coated door bars, new guides and door cover

Controls:

  • Displays/touchpads are reconditioned or replaced
  • Printer components are replaced
  • Control Board, Connector Board, Power Supply Board, Control housing are tested and Recertified using independent testing station
  • All wiring is verified and replaced if necessary

Framing/Stainless panels:

All other Stainless and framing side panels are new or regrained to be like new condition.

blank

Quality Assurance:

  • All units are calibrated
    • All units must complete 20 cycles without a leak rate above the manufacturer accepted range: 1.0 leak rate

High Quality and Reliable Refurbished Medical Equipment

With over a quarter century of experience in rebuilding and refurbishing steam sterilizers, you can rest assured that your purchase of a refurbished sterilizer from Auxo Medical will perform like new at a considerable cost savings without sacrificing quality and effectiveness. View our online catalogue of new and refurbished sterilizers  or contact Auxo Medical today to get your customized quote on a high quality refurbished steam sterilizer.

Contact Us

* Please note:  Auxo Medical does not provide services for personal equipment.

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Maximum file size: 516MB

Sending

Definitions:

  • Resurfaced: Surfaces are decontaminated – types of resurfacing:
    • Bead blasting/buffing if brass or other similar metal
    • Re-graining if stainless steel
    • Repainting with rust resistant paint
    • Recoated with antimicrobial plating
  • Rebuilt: Component Housing bead blasted, inspected for integrity, rebuilt with new components like valve kits, seats, seals, O-Rings, etc.
  • New: Item replaced with OEM New replacement component
Autoclave | Auxo Medical

How Does an Autoclave Work?

March 20, 2023
, , , , Articles

The power of steam: An introduction to autoclaves

Autoclaves are a vital tool in the healthcare field, as well as in various other industries, such as laboratories and manufacturing facilities. Autoclaves use steam to sterilize and disinfect equipment, tools, and materials, ensuring that they are free of harmful bacteria and viruses. Steam sterilization is a highly effective method of sterilization as it can penetrate materials that other sterilization methods might not be able to reach, including fabrics, plastics, and other heat-resistant materials. The process of autoclaving involves exposing the materials being sterilized to high-pressure and high-temperature steam for a set period. By doing so, the steam kills any microorganisms on or within the material, ensuring that it is free of any harmful bacteria or viruses. Autoclaving is an essential part of maintaining a safe and hygienic workspace, and it is essential to know how it works, to ensure that it is used effectively.

The inner workings of an autoclave: A detailed look

Autoclaves work on simple principles of steam, pressure, and heat. The autoclave chamber is a sealed vessel, which is filled with water. Once the water has been heated to the boiling point, the steam is generated, which is then circulated throughout the chamber, creating pressure. The temperature and pressure inside the autoclave are carefully controlled to ensure that materials are effectively sterilized. There is a control panel on the outside of the autoclave that allows the user to set the temperature, pressure, and sterilization time. The entire process of sterilization is automated, and the autoclave will signal the user once the sterilization process has completed. The materials inside the sterilization chamber must be free of air pockets to ensure that the steam can adequately penetrate the materials. The equipment is designed to avoid pressure build-ups that might damage it while allowing pressure to build up within the chamber.

Modern autoclaves: Innovations and advancements in the field of sterilization

In recent years, there have been significant advancements in the design and function of autoclaves. Modern autoclaves are created with advanced technology and innovative features, such as touchscreen controls, automated loading and unloading, and remote monitoring. These features improve the efficiency and effectiveness of the sterilization process, making it easier for healthcare professionals and scientists to perform their work safely and effectively. Additional innovations include the use of plasma sterilization, which provides an alternative to traditional autoclaving, and humidity sensors, which help to reduce the risk of equipment damage that could occur when autoclaving moisture-sensitive items. As technology and science continue to advance, it’s likely that we’ll see more improvements in autoclave design, making them even more effective in sterilizing and disinfecting equipment, tools, and materials.

Get your autoclave and sterilize processing equipment from Auxo Medical

Autoclaves have been a staple in the healthcare industry and beyond for decades, providing a simple, cost-effective, and highly efficient method of sterilization that helps to protect workers and maintain a safe and hygienic workspace. At Auxo Medical, we have a wide range of autoclaves, sterilizers and washer disinfectors for to fit your facility or Sterile Processing Department needs. View all our available medical equipment online or contact us for a customized quote today.

The Benefits an Ultrasonic Cleaner From Auxo Medical

February 27, 2023
, , , , , Articles

Ultrasonic CleanerWhat is an Ultrasonic Cleaner?

An ultrasonic cleaner is a device that uses ultrasonic sound waves to agitate a cleaning solution and remove dirt, dust, and grime from various hard surfaces. The ultrasonic waves create tiny bubbles in the cleaning solution which implode and cause a scrubbing action on the surface being cleaned. Ultrasonic cleaners are used in a wide variety of industries, such as medical, automotive, and electronics, and are particularly adept at cleaning delicate items such as jewelry, lenses, and precision instruments. Ultrasonic cleaners are simple to operate, efficient, and cost effective, making them a popular choice for many cleaning applications.

 

Why Should You Use an Ultrasonic Cleaner in Your Medical Practice?

Ultrasonic cleaners are becoming an increasingly popular tool in medical practices. They are an effective and efficient way to clean medical instruments, making them a valuable asset to any medical practice. Here are some of the benefits of using an ultrasonic cleaner in your medical practice:

  1. Increased Safety: Ultrasonic cleaners are extremely effective at removing dirt, bacteria, and other contaminants from medical instruments. This helps to reduce the risk of cross contamination and the spread of infections.
  2. Cost Savings: Ultrasonic cleaners are more cost-effective than traditional cleaning methods. This can help to reduce the overall costs associated with instrument maintenance.
  3. Time Savings: Ultrasonic cleaners are much faster than traditional cleaning methods. This helps to reduce the time spent cleaning instruments and allows the medical staff to focus on more important tasks.
  4. Improved Durability: Ultrasonic cleaners can help to extend the life of medical instruments. This is because they are able to clean even the most difficult to reach areas of the instrument, which can help to prevent rust and corrosion.

Using an ultrasonic cleaner in your medical practice can help to improve safety, reduce costs, save time, and extend the life of medical instruments. It is an investment that will pay off in the long run and one that should be considered by any medical practice.

 

Durasonic Ultrasonic Bench top cleanersThe Benefits of Buying a Refurbished Ultrasonic Cleaner Versus New

When considering buying an ultrasonic cleaner, there are many benefits to choosing a refurbished model versus buying a new one. Refurbished models are typically more affordable and can save you money in the long run. Additionally, refurbished models have been tested and inspected to ensure they are in proper working condition, and can be certified by the manufacturer to have the same level of quality as a new model. Furthermore, they often come with a warranty, so you can be assured that you are getting a reliable product. With all these benefits, buying a refurbished ultrasonic cleaner is a great option for anyone looking to save money and get a reliable product.

 

Order Your New or Refurbished Ultrasonic Cleaner from Auxo Medical

Auxo Medical is the perfect choice for finding new and refurbished ultrasonic cleaners. With years of experience providing medical equipment to healthcare facilities, Auxo Medical offers top-of-the-line technology at unbeatable prices. Our ultrasonic cleaners are tested and certified to meet the highest standards in safety, performance, and efficiency. Whether you need a powerful, industrial-grade ultrasonic cleaner or a smaller, more compact model, Auxo Medical has the perfect solution for you. Shop today and experience the Auxo Medical difference.

Steris Sterilizer and Washer Printer Paper – In Stock, Low Price – Order Online

February 10, 2023
, , , , Articles, Product Specific Catalogs
blank
Steris Sterilizer and Washer Printer Paper
In stock and ready to ship
blank

Would you like to order more than just the products listed ?
blank
Auxo Medical
5401 Distributor Drive, Richmond, VA 23225
p. 804.233.4424 / 888.728.8448     f. 804.233.4202     w. www.auxomedical.com
L E T ‘ S    C O N N E C T
blank  blank  blank  blank  blank  blank
Copyright © 2023 Auxo Medical, LLC, All rights reserved.
Steris HC-900 Evolution Sterilizer | Auxo Medical

Auxo In Action – Installation of Steris Evolution HC900 Steam Sterilizer

December 22, 2022
, , , , Articles

Installation of Steris Evolution HC900 Steam Sterilizer

This past week Auxo Medical installed a Steris Evolution HC900 Steam Sterilizer at Calyxt’s facility in Roseville, MN. It was a pleasure to help Calyxt (calyxt.com) achieve the highest level of soil and equipment sterilization in their sustainable agricultural initiatives.

 

 

Contact us to learn about how Auxo Medical can assist your organization with sterilizing equipment, repair and service.

1 2