At Auxo Medical, we provide Fuji mobile and procedural imaging equipment that supports bedside care, minimally invasive procedures, and veterinary practices. These solutions emphasize mobility, precision, and reliable image quality where it’s needed most.

Fuji Portable X-Ray Systems

• Fuji FDR AQRO Portable X-ray with FDR ES 24/14C – Compact and easy to maneuver in tight spaces.
• Fuji FDR Go PLUS with FDR D-EVO III – Full-size portable designed for agile bedside workflows.

Industries and Use Cases

• Emergency departments and ICUs: Rapid bedside imaging without patient transport
• Critical care and post-operative floors: Quick checks for high-acuity patients

Fuji Surgical C-Arms with Flat Panel Detectors

• Fuji Persona C Compact C-arm with 30cm Cesium Flat Panel Digital Detector
• Fuji Persona C Compact C-arm with 21cm Cesium Flat Panel Digital Detector
• Fuji Persona CS Compact C-arm with 21cm Cesium Flat Panel Digital Detector

Best-Fit Procedures and Settings

• Orthopedic surgery and ambulatory surgery centers: Hardware placement and alignment visualization
• Pain management clinics: Guidance for injections and minimally invasive interventions

Fuji Veterinary X-Ray Room

• Fuji VXR Veterinary X-Ray Room – Compact system built for in-clinic veterinary radiography.

Who It Serves

• Small animal veterinary clinics needing routine and pre-op imaging
• Specialty veterinary practices focused on orthopedic and surgical cases

At Auxo Medical, we help you select the right Fuji portable, C-arm, or veterinary solution to match your clinical environment and patient care needs. Contact us today or request a quote from the products below:

The post Fuji Portable X-Ray, C-Arms & Veterinary Solutions from Auxo Medical appeared first on Auxo Medical.

The post ECG Machines and Stress Test Systems for Hospitals and Clinics appeared first on Auxo Medical.

The Difference Between Chemical Film Developers and Digital Detectors

Traditional X-ray imaging relies on photographic film that must be processed using chemical developers, fixers, and other solutions in a darkroom or processor. This method involves exposing the film to X-rays, then chemically developing it to produce a visible image. While effective for decades, chemical processing is time-consuming, generates hazardous waste, requires regular maintenance of processors, and often results in lower contrast or resolution compared to modern alternatives.

Digital detectors, by contrast, use advanced flat-panel technology—typically cesium iodide (CsI) or similar scintillators paired with thin-film transistor (TFT) arrays—to capture X-ray images electronically. The detector converts X-ray energy directly into digital signals, delivering instant images on a workstation or monitor. This eliminates chemicals entirely, reduces radiation exposure, improves workflow speed, and provides superior dynamic range and detail. Digital systems also support easy image storage, sharing, and post-processing enhancements.

Devices That Use Digital Detectors

Digital detectors power a wide range of modern radiographic and fluoroscopic equipment. Common devices include:

• U-arm and fixed radiography systems for general diagnostic imaging.
• C-arm fluoroscopy units for real-time surgical guidance.
• Portable and wireless detector panels that retrofit existing X-ray rooms or mobile units.
• Long-length or full-spine detectors designed for specialized views.
• Mini C-arms for extremity and orthopedic procedures.

These devices appear across radiology departments, operating rooms, and mobile imaging setups.

Industries and Use Cases That Benefit from Digital Detectors

Hospitals, outpatient surgery centers, orthopedic clinics, and trauma centers gain significant advantages from digital detectors. Use cases include:

• Orthopedic and spine surgery — Precise visualization during joint replacements, fracture repairs, and spinal fusions with minimal radiation.
• Vascular and interventional procedures — Real-time imaging for catheter placements and minimally invasive interventions.
• General surgery and emergency care — Fast image acquisition for trauma assessments and intraoperative guidance.
• Full-spine and long-bone imaging — Single-exposure captures for scoliosis evaluations or whole-limb studies, improving patient comfort and workflow.
• Retrofit upgrades — Converting legacy film or CR systems into efficient DR setups without replacing the entire X-ray machine.

Facilities focused on reducing dose, eliminating chemical waste, and accelerating turnaround times see the greatest impact.

Our Digital Detector Products at Auxo Medical

We offer a robust lineup of digital detectors and systems from trusted manufacturers. Here is a sampling of our available products:

• Fuji Digital Radiography U-arm System w/ 17×17 Detector and FDX Console Workstation — A versatile, space-saving solution ideal for clinical environments needing reliable general radiography.
• Fuji FDR D-EVO III G80i 17×32 in Full Spine Detector Panel Only — Ultra-lightweight wireless panel perfect for spine, trauma, and surgical long-view imaging.
• FDR D-EVO III G43 17 x 17” Detector Panel Only — One of the industry’s lightest detectors, offering excellent portability and durability for everyday use.
• Fuji ES 14C Detector with Battery, Tethered — Compact retrofit solution delivering high-performance imaging in existing X-ray setups.
• Fuji Persona C Compact C-arm with 30cm Cesium Flat Panel Digital Detector — Advanced mobile fluoroscopy system optimized for minimally invasive procedures.
• OEC GE OEC ELITE CFD 21cm Flat Detector C-Arm – General Surgery Package — High-clarity surgical imaging with modern flat-panel technology replacing older image intensifiers.
• Philips Veradius Unity Flat Detector C-Arm — Precision mobile imaging solution with dose feedback and repositioning features for surgical suites.
• Orthoscan Pulse Mini C-Arm with Flat Detector — Compact system ideal for orthopedic extremity imaging with pulsed fluoroscopy.

We also carry additional Fuji ES and FDR series tethered detectors, DRTECH EXTRON C-arms, and more specialized models to fit various facility needs.

Upgrading to digital detectors streamlines operations and enhances diagnostic confidence. Contact us at Auxo Medical to discuss which solution best fits your practice.

The post Digital Detectors for X-Ray Units Available at Auxo Medical appeared first on Auxo Medical.

If you’re searching for a trusted source for a refurbished defibrillator, a monitor/defibrillator for transport or bedside response, or mechanical CPR support to improve consistency during resuscitation, you’re in the right place. Explore our Defibrillators product category to see what’s currently available and request a quote directly from each product page.

Why defibrillator readiness is more than buying a device

A defibrillator program works best when the device, accessories, and training all line up with your environment. In hospitals, that might mean advanced monitoring and fast, intuitive operation for in-house rapid response teams. In EMS and transport, it often means rugged portability, reliable power, and features that support resuscitation while moving a patient. In training and biomedical support, it can mean realistic simulation tools that help teams practice confidently without tying up clinical units.

That’s why we focus on complete solutions—helping you choose equipment that matches your protocols, staffing, and patient population, and supporting you with service and maintenance options when you need them.

Featured defibrillators and resuscitation products available from our catalog

Below is a sampling of defibrillator and resuscitation-support products from our defibrillator catalog. Each product name links to the correct Auxo Medical product page so you can request a quote quickly.

Physio-Control Lifepak 20E Defibrillator

If you need a hospital-ready defibrillator/monitor built for fast response, the LIFEPAK line is a strong fit. We often recommend this type of unit for in-hospital first responders who need an intuitive interface, dependable daily readiness behavior, and clear monitoring visibility during high-stress events.

• Common use cases: hospital rapid response, code teams, emergency department overflow, procedural areas that require immediate defibrillation capability
• Industries and settings: hospitals, surgery centers, urgent care centers, specialty clinics with sedation or higher acuity workflows

Lifepak 20E Defibrillator w/out pacing

Some teams want the LIFEPAK workflow and AED capability, but do not require external pacing as part of their typical response pathway. This option can be a practical match for facilities standardizing equipment while aligning features to clinical needs.

• Common use cases: crash cart standardization, backup response units, outpatient and procedural settings needing reliable defibrillation support
• Industries and settings: ambulatory centers, outpatient clinics, specialty offices, inpatient units supporting rapid response coverage

PhysioControl Lifepak 15

When you need a high-performance monitor/defibrillator with broad clinical capability, the LIFEPAK fifteen platform is widely used for advanced response and transport scenarios. This style of unit is well suited for teams that want robust monitoring, therapy options, and streamlined data handling during resuscitation and post-event review.

• Common use cases: ALS response, patient transport, emergency department monitoring, higher-acuity clinical environments
• Industries and settings: EMS agencies, hospitals, critical access facilities, mobile transport teams

LIFEPAK 15

If your environment is hard on equipment, durability matters. This LIFEPAK fifteen listing highlights a platform built to stand up to challenging conditions while supporting advanced clinical workflows. We see it as a strong fit for teams that need consistent performance in busy, high-turnover response settings.

• Common use cases: busy emergency response areas, transport-heavy workflows, multi-unit standardization
• Industries and settings: EMS, emergency departments, hospital biomedical standardization projects

Refurbished Zoll X Series

The ZOLL X Series is a powerful monitor/defibrillator option for organizations that want advanced monitoring and resuscitation support in one device. This listing is particularly relevant when your team values therapy capability plus monitoring depth for patient movement and care transitions.

• Common use cases: transport monitoring, emergency department response, ICU-to-imaging transfers, code response with expanded monitoring
• Industries and settings: hospitals, EMS, critical care transport, emergency preparedness teams

Zoll R Series Defibrillator

For ALS providers and hospital teams looking for an advanced defibrillator platform with an emphasis on readiness management and CPR support features, the ZOLL R Series is a standout. This product line is often associated with workflow features that support device fleet readiness and post-event review.

• Common use cases: ALS response, defibrillator fleet management, code response standardization
• Industries and settings: EMS, hospitals, large facilities managing multiple response carts or response teams

Zoll R Series Defibrillator, with SP02

If you want the ZOLL R Series platform plus oxygen saturation monitoring capability, this configuration supports teams who prefer more complete monitoring during resuscitation, transport, or stabilization.

• Common use cases: ALS response with pulse oximetry monitoring, transport monitoring, emergency department response
• Industries and settings: EMS, hospitals, transport teams, facilities prioritizing monitoring expansion during critical events

LUCAS 2 Chest Compression System

Mechanical CPR can help reduce fatigue-related variation and support consistent compressions during long or complex resuscitations. The LUCAS system is designed to help responders stay focused on other essential tasks—airway management, medication delivery, rhythm checks, and coordinated team roles—while compressions remain consistent.

• Common use cases: prolonged resuscitation, transport during CPR, limited staffing situations, high-volume response teams
• Industries and settings: EMS, emergency departments, cath labs, hospitals with dedicated code teams

Lifeline ARM Chest Compression Device RCF-AlO00EN

The Lifeline ARM is another mechanical CPR option aimed at delivering consistent chest compressions. This kind of device can be valuable for organizations building a standardized resuscitation approach across shifts, units, or multiple sites.

• Common use cases: standardizing CPR quality, supporting responders during extended events, improving consistency when staffing is tight
• Industries and settings: EMS, hospitals, urgent care centers with higher-acuity workflows, industrial medical teams with onsite response requirements

Hard Paddles Lifepak 15

Accessories matter. Having the right paddles and connection options available for your defibrillator can help your team stay efficient during urgent response. These hard paddles are intended for use with the LIFEPAK fifteen monitor/defibrillator.

• Common use cases: stocking crash carts, replacing worn accessories, standardizing response equipment across units
• Industries and settings: hospitals, EMS agencies, biomedical departments managing accessory readiness

Zoll 12 Lead ECG M-series Simulator

Training tools can be the difference between “we covered it in class” and “we’re ready in real life.” This simulator is intended for use with ZOLL M Series defibrillators and is designed to generate realistic ECG rhythms for practice and testing. It’s a strong fit for clinical education, EMS training programs, and biomedical teams validating workflows.

• Common use cases: clinical training, EMS education, skills labs, equipment checks and simulation scenarios
• Industries and settings: EMS training centers, hospitals with education departments, clinical simulation labs

Who we support

We’re based in Richmond, Virginia, and we support healthcare organizations and technical teams across a wide regional footprint, including multiple states in the Mid-Atlantic and Southeast. If you’re searching for a defibrillator supplier, refurbished defibrillator options, or biomedical equipment support in Virginia or nearby service regions, we’re built to help you move quickly from quote to deployment.

We also deliver equipment across the contiguous United States, and in some cases we can support international shipping needs—so multi-site organizations can work with one partner for consistent procurement and support.

How to choose the right defibrillator for your environment

The “best” defibrillator is the one that fits your team, protocols, and environment. Here are practical decision points we walk through with customers:

• Clinical setting and staffing: Hospital code teams and ALS providers may prioritize advanced monitoring and therapy options, while lower-acuity settings may prioritize ease of use and fast AED workflows.
• Monitoring needs: If your team relies on oxygen saturation, blood pressure monitoring, or advanced ECG workflows, choose a platform configured to support those parameters.
• Transport and durability: For EMS, transport, and busy hospital workflows, rugged construction and portability matter as much as feature depth.
• Readiness and fleet management: If you manage multiple devices across a facility or agency, readiness features and data workflows can reduce surprises and streamline compliance.
• Resuscitation consistency: If CPR quality consistency is a key goal, consider pairing a defibrillator platform with a mechanical CPR option like LUCAS or Lifeline ARM.

Why facilities choose refurbished defibrillators from Auxo Medical

Refurbished defibrillators can be a smart way to expand coverage, standardize equipment, or replace aging units—without compromising the seriousness of the mission. When you buy through us, we focus on practical readiness: clear product listings, quote-based purchasing, and configurations that align with clinical workflows. Many of our listings emphasize accessories, operational readiness behaviors, and serviceability—because emergency gear is only valuable when it’s ready right now.

Ready to build a stronger response program?

If you’re planning a new defibrillator purchase, replacing aging devices, expanding coverage across departments, or building out mechanical CPR capability, we can help you select the right equipment for your environment. Visit our Defibrillators product category, review the products above, and request a quote from the product page that matches your needs.

The post Defibrillators and Resuscitation Equipment for Hospitals, EMS, and Clinical Teams appeared first on Auxo Medical.

High-Performance X-Ray Tables for Versatile Radiography

We offer robust Fuji X-ray tables engineered for high-volume imaging environments. The Fuji Carbon Fiber Top Adjustable Height X-ray Table (P/N: 800051360) features a low-attenuation carbon fiber tabletop that delivers high-contrast images while minimizing patient dose—ideal for hospitals and outpatient clinics performing routine and specialized radiographic procedures.1

Complementing this, the Fuji Laminate Top Adjustable Height X-ray Table (P/N: 800051359) provides a 4-way floating tabletop that operates without power, offering ergonomic flexibility for busy radiology departments.

For fixed-height needs, explore the Fuji Carbon Fiber Top Fixed Height X-ray Table (P/N: 800051331) and the Fuji Laminate Top Fixed Height X-ray Table (P/N: 800051332), both designed for durability and patient support up to 551 pounds in surgical centers and diagnostic imaging facilities.

Advanced Digital Radiography Systems

Our Fuji digital radiography suites streamline operations across diverse settings. The Fuji FDR Essentia FS Digital Radiography Suite delivers space-efficient, high-quality imaging with intuitive touchscreen controls, benefiting orthopedic clinics and multi-specialty practices.1

The Fuji FDR Clinica X Radiology Suites offer scalable solutions for hospital radiology departments and outpatient facilities, incorporating Fujifilm’s innovative image processing for superior diagnostic clarity.

Specialized Detectors for Full-Spine and Trauma Imaging

For spine, trauma, and surgical applications, we provide lightweight wireless detectors. The Fuji FDR D-EVO III G80i 17×32 in Full Spine Detector Panel Only weighs just 12 lbs and enables seamless long-length imaging in a single exposure—perfect for orthopedic surgeons, trauma centers, and pain management clinics.

The Fuji FDR D-EVO GL 17×49 in Full Spine Length Detector With Rolling Stand further enhances efficiency for full-spine radiography in hospitals and rehabilitation facilities.

Portable and Mobile Solutions for On-the-Go Care

Mobility is critical in emergency rooms, ICUs, and long-term care. The Fuji FDR AQRO Portable X-ray with FDR ES 24/14C is ultra-compact and 80% lighter than traditional units, enabling effortless positioning by a single technologist in hospitals and ambulatory surgery centers.1

The Fuji FDR Go PLUS with FDR D-EVO III adds quiet operation and optimal dose efficiency for bedside imaging in critical care environments.

Veterinary and Surgical Imaging Excellence

Veterinary practices benefit from the Fuji VXR Veterinary X-Ray Room, a compact system delivering brilliant image quality at low dose in small spaces.1

For surgical suites, the Fuji Persona C Compact C-arm with 30cm Cesium Flat Panel Digital Detector provides fast, precise positioning and high-resolution imaging for minimally invasive procedures in ambulatory surgery centers and orthopedic operating rooms.1

Why Choose Auxo Medical for Fuji Equipment?

At Auxo Medical, we combine premium Fuji products with expert support to help you optimize your imaging capabilities. Whether upgrading to digital radiography, outfitting a new facility, or enhancing portable workflows, our solutions support hospitals, clinics, surgical centers, veterinary practices, and more with reliable performance and reduced radiation exposure.

Contact us today or request a quote from the products below and explore how these Fuji systems can elevate your diagnostic imaging.

The post Discover Premium Fuji Imaging Solutions at Auxo Medical appeared first on Auxo Medical.

Below is a practical guide to how centrifuges are used across healthcare and laboratory environments—plus a product sampling from our centrifuge catalog so you can quickly compare options by workflow, speed expectations, and specimen type.

Why the “right” centrifuge matters in clinical labs

A centrifuge is not just a spinning motor—it is a quality-control tool. The right rotor style, consistent performance, safe lid locking, and repeatable cycles help you reduce redraws, improve separation quality, and keep specimens moving downstream into chemistry, hematology, coagulation, urinalysis, or serology testing.

In practice, most facilities choose centrifuges based on a few decision drivers:

• Workflow speed for STAT or rapid turnaround testing
• Repeatability for routine processing with minimal operator variability
• Specimen type such as serum, plasma, urine, coagulation tubes, or blood bank tubes
• Portability for mobile phlebotomy and home health collection
• Specialty use for veterinary microhematocrit or blood bank cell washing and serology procedures

STAT centrifuges for rapid turnaround and high-throughput accessioning

STAT labs live and die by minutes. If your accessioning bench is constantly feeding analyzers, a dedicated STAT centrifuge can help compress the time between draw and result—especially for serum or plasma preparation. We stock several Drucker Diagnostics DASH series options designed for fast, repeatable processing in busy environments.

Featured STAT centrifuges from our catalog:

• Drucker Diagnostics DASH Flex 24 Programmable STAT Centrifuge
  Built for high-volume STAT workflows where customizable protocols and consistent execution matter. A strong fit for hospital labs, reference labs, and centralized accessioning areas that want programmable control without slowing the bench.
• Drucker Diagnostics DASH Flex 12 Programmable STAT Centrifuge
  A great mid-footprint option for facilities that want programmable STAT cycles with straightforward operation. Common use cases include emergency departments, STAT benches, and satellite labs.
• Drucker Diagnostics DASH Flex 6 DC Programmable STAT Centrifuge
  Designed for compact STAT spaces where speed and customization are still required. Ideal for smaller hospital labs, urgent care labs, and point-of-care environments where bench space is limited but expectations remain high.
• Drucker Diagnostics DASH Apex 24 High Volume STAT Centrifuge
  A strong choice for labs that want high-volume STAT throughput with streamlined operation. Excellent for busy accessioning lines that need to keep specimens moving with minimal friction.
• Drucker Diagnostics DASH Apex 12 Set-and-Lock STAT Centrifuge
  Built for repeatability. If your goal is to lock in validated cycles and reduce variability between operators and shifts, set-and-lock style controls are a practical advantage for compliance-minded labs.
• Drucker Diagnostics DASH Apex 6 Compact STAT Centrifuge
  A compact, workflow-friendly STAT centrifuge designed for speed. A smart pick for smaller STAT benches, emergency testing areas, and labs that want fast processing without a complex learning curve.
• Drucker Diagnostics DASH Apex 4 Compact STAT Centrifuge
  For ultra-tight spaces and quick spins near the analyzer. This model is often useful for satellite labs and rapid-response areas that need a small footprint.

Coagulation centrifuges for hemostasis testing and time-sensitive results

Coag testing is one of the most time-sensitive areas of the clinical lab, and centrifugation quality plays a direct role in getting a usable specimen to the analyzer. If your lab runs frequent coag panels (or supports ED and critical care coag requests), a dedicated coag centrifuge can help standardize the workflow and reduce delays.

• Drucker Diagnostics DASH Coag 2-3-5 Minute STAT Coag Centrifuge
  Purpose-built for coagulation testing environments where rapid processing supports faster clinical decisions. A great fit for hospital labs, STAT coag benches, and emergency care workflows.

Routine centrifuges for clinics, physician office labs, and daily diagnostic volume

Routine testing demands consistency more than anything. Many labs prefer centrifuges that support repeatable, validated cycles and “set it and run it” simplicity—especially where multiple staff members share responsibilities across draws, processing, and packaging.

Featured routine centrifuges from our catalog:

• Drucker Diagnostics HORIZON 24 High-Capacity Routine Centrifuge
  Built for versatility and higher routine volume. A strong option for labs processing a steady stream of blood and urine specimens throughout the day.
• Drucker Diagnostics HORIZON 12 Compact Routine Centrifuge
  A space-friendly routine model for clinics, outpatient labs, and facilities where a compact footprint still needs dependable daily output.
• Drucker Diagnostics HORIZON 6 Compact Routine Centrifuge
  Ideal for smaller labs and point-of-care facilities that prioritize repeatability and straightforward operation in a compact layout.
• Drucker Diagnostics HORIZON 24 Flex Programmable Routine Centrifuge
  A programmable routine centrifuge for labs that want the flexibility to store and recall customized routines across different specimen types and departments.
• Drucker Diagnostics HORIZON 12 Flex Programmable Routine Centrifuge
  A programmable, compact routine option for labs that need flexible cycle control without dedicating extra bench space.
• Drucker Diagnostics HORIZON 6 Flex Programmable Routine Centrifuge
  Designed for flexible routine processing in smaller footprints. Useful for physician office labs, outpatient facilities, and satellite lab rooms.
• Drucker Diagnostics HORIZON 6 Flex FA Programmable Routine Centrifuge
  A flexible routine centrifuge option that supports fixed-angle style workflows where appropriate, often used in clinical environments that prefer that separation approach for certain tube types.

Everyday clinical centrifuges for compact labs and steady sample flow

Some facilities want proven, widely used clinical centrifuges that are easy to operate and fit well in a clinic lab environment. These are common in physician offices, outpatient collection sites, and smaller labs that still care deeply about specimen quality.

• Drucker Diagnostics 642E Single-Speed Electronic Centrifuge
  A strong fit for clinics and labs that want consistent, straightforward operation with a compact footprint. Often used anywhere routine serum or plasma separation is part of daily workflow.
• Drucker Diagnostics 642B Single-Speed Centrifuge
  A practical choice for budget-conscious labs that still want dependable separations and simple daily operation.
• Drucker Diagnostics 614B Fixed Angle Single-Speed Centrifuge
  Useful in offices and smaller clinical labs for on-site processing where fixed-angle workflows are preferred.

Mobile centrifuges for home health, field collection, and on-the-go processing

Mobile phlebotomy and home health collection adds a layer of complexity: you have to protect specimen integrity while keeping schedules tight. If your clinicians need to process tubes while traveling between patient locations, a vehicle-powered centrifuge can improve turnaround time while reducing delays before transport.

• Drucker Diagnostics 642M 12V DC Mobile Centrifuge
  Designed specifically for mobile processing needs. A great match for home health agencies, mobile phlebotomy routes, and field-based specimen collection programs.

Blood banking and serology centrifuges for transfusion services and immunohematology

Blood banking and serology workflows demand specialized performance—especially for grouping, typing, crossmatching, and cell washing procedures. At Auxo Medical, we carry blood bank and serology centrifuge options that support these critical processes in transfusion services and immunohematology labs.

• Drucker Diagnostics SERO 12 Blood Banking Centrifuge
  Built for blood banking environments that need consistent results across core serology procedures and high-importance samples.
• Serofuge 2002 Centrifuge
  A versatile centrifuge used in blood bank and serology workflows for procedures such as blood grouping and crossmatching.

Veterinary centrifuges for in-clinic diagnostics and lab-quality versatility

Veterinary practices often need multi-purpose centrifugation for common specimen types—plus microhematocrit capability. The goal is fast, reliable separation for in-house diagnostics without sending everything out. We carry veterinary centrifuges designed to support blood, urine, fecal, and microhematocrit workflows in clinic labs.

• Drucker Diagnostics TrueBond Veterinary centrifuge for blood, urine, fecal, and microhematocrit
  An all-in-one veterinary solution designed around the realities of in-clinic testing. A strong fit for general veterinary practices and veterinary diagnostic labs.
• Drucker Diagnostics TrueBond Set 3 Set-and-lock veterinary centrifuge for blood, urine, fecal, and microhematocrit
  Ideal for practices that want repeatable set-and-lock operation to keep staff training simple and results consistent across shifts.
• Drucker Diagnostics TrueBond Duet Compact Dual Rotor Veterinary Centrifuge
  Designed for veterinary clinics that want added flexibility across sample types and workflows—especially when the clinic lab is doing a wide mix of testing.

High-speed horizontal centrifugation for rapid sample separation

Some labs want a high-speed horizontal centrifuge that supports rapid turnaround and fits well next to STAT analyzers. If you’re building a lean workflow around “spin and run,” a dedicated rapid centrifuge can reduce bottlenecks.

• StatSpin Express 4 Centrifuge
  A strong choice for labs focused on rapid processing near the analyzer. Frequently used for time-sensitive workflows that benefit from quick separation and streamlined movement from centrifuge to testing.

Why labs choose Auxo Medical for centrifuges

We do more than list equipment—we help facilities match equipment to workflow reality. Our centrifuge catalog includes brand new, reconditioned, and refurbished options so you can balance performance goals with budget planning. We also support the long life of your lab equipment with service, maintenance, and repair expertise.

For organizations that value regional support, we are headquartered in Richmond, Virginia and provide field service across multiple areas in the Mid-Atlantic and Southeast, including Virginia, Maryland, Washington, DC, North Carolina, South Carolina, Tennessee, Kentucky, Ohio, Michigan, Georgia, and Florida.

FAQ: Choosing a centrifuge for your lab or clinic

Which centrifuge is best for STAT testing?

For STAT workflows, many labs look for fast turnaround features, clear status indication, and repeatable cycles that reduce operator variability. In our catalog, the DASH Flex series and DASH Apex series are designed specifically around STAT lab demands, while the StatSpin Express line is commonly used for rapid separation near analyzers.

Which centrifuge is best for routine processing in clinics?

Clinics and physician office labs often prioritize simplicity, repeatability, and compact footprint. In our catalog, the HORIZON routine models and the Drucker Diagnostics single-speed clinical centrifuges are commonly aligned with these needs.

Which centrifuge should a veterinary clinic consider?

Veterinary clinics often need multi-purpose capability across blood, urine, fecal, and microhematocrit samples. Our TrueBond veterinary centrifuge options are built specifically for these in-clinic workflows.

Can we support mobile centrifugation for home health or field collection?

Yes. If your workflow includes field collection and you want to reduce delays before transport, a mobile centrifuge designed for vehicle-powered operation can be a strong operational upgrade.

Ready to choose? Browse our centrifuge catalog, open the product pages that match your workflow, and reach out to our team. We’ll help you align the right centrifuge with your specimen types, turnaround expectations, and bench space—so your lab can run smoother from accessioning to results.

The post Medical and Laboratory Centrifuges from Auxo Medical: Find the Right Fit for STAT, Routine, Blood Bank, Veterinary, and Mobile Workflows appeared first on Auxo Medical.

At Auxo Medical, we help facilities build safer, smoother workflows with dependable patient positioning equipment—from precision surgical positioners to imaging-friendly accessories. Whether you’re running an operating room, ambulatory surgery center (ASC), pain management suite, or procedure clinic, the right positioning setup supports three things every team cares about: patient comfort, secure access to the surgical site, and efficient turnover.

On our Patient Positioning catalog page, you’ll find a mix of brand new, reconditioned, and refurbished options—so you can match performance needs and budget without compromising on essentials.

Why patient positioning matters (and what people often overlook)

Patient positioning isn’t just “where the patient lies.” It’s a system that affects:

• Surgical access & visibility (stable anatomy and consistent exposure)
• Imaging quality (radiolucent components, proper table extensions, and smart accessory placement)
• Staff ergonomics (less lifting, fewer awkward holds, more controlled adjustments)
• Procedure consistency (repeatable setups across rooms, surgeons, and service lines)

A common misconception is that “pads are pads” and “supports are supports.” In reality, small details—like how a device mounts to the table, whether it’s radiolucent, how quickly it adjusts, and whether it stores cleanly—can make or break the workflow on busy days.

Featured patient positioning products (a practical sampling from our catalog)

Below is a curated sampling of patient positioning products from our Patient Positioning category. We’ve grouped them the way real facilities think about positioning: by specialty, room type, and workflow.

1) Lithotomy, GYN, urology, robotic & colorectal: stirrups and leg positioning

• Allen Yellofin Lift-Assist Stirrups (OEM# O-YFASI)
  Built for teams that want controlled leg positioning and easier intraoperative adjustments. These are commonly used for lithotomy and are relevant across OB/GYN, urology, laparoscopy, robotic, and colorectal service lines—especially when staff ergonomics and repeatability matter.
• Single Loop Leg Prep
  A leg-prep accessory designed to support the limb during prep and setup. Great for facilities that want a wipe-clean workflow and consistent positioning during pre-op prep steps in ORs and ASCs.
• Stand Alone leg Prep
  Ideal when you’re not working off a standard OR table rail. This can be especially helpful when cases are performed on a stretcher or gurney—a real-world scenario for outpatient centers, procedure rooms, and high-throughput environments where flexibility matters.

2) Orthopedics & sports medicine: knee supports, arthroscopy tools, and stress positioning

• Steris BF717 Arthroscopy Knee Positioner
  A targeted solution for arthroscopy setups (commonly “off the end” techniques). If you support sports medicine or high-volume ortho, specialized knee positioners can help standardize your room setup and reduce improvised positioning.
• Total Knee Stabilizer Leg Support
  Built to support legs for total knee replacement workflows. When your facility runs TKA days, purpose-built stabilizers can help maintain consistent limb support and surgeon access.
• Shutt Universal Stress Post
  Commonly associated with meniscal repair workflows (including figure-4 positioning techniques). This is the kind of specialty tool that matters most in knee arthroscopy programs where efficiency and access are everything.
• Knee Bolster Pad for Smith & Nephew T-max (BB-WEDGE-2718505)
  A reusable positioning wedge designed for lower extremity positioning. Wedges are small investments that can reduce “workarounds” and help teams get consistent angles across providers and rooms.

3) Shoulder procedures & beach chair positioning: systems designed for access

• Allen Table Powered Beach Chair
  A streamlined way to position patients through an articulated range using the surgical table’s power. Great for facilities that perform frequent shoulder arthroscopy and want fast, repeatable beach chair setups.
• Smith & Nephew Tenet T-max Shoulder Positioner
  A shoulder positioning system designed around stable support and surgical access, with adjustability that supports a broad range of shoulder workflows. This is a strong fit for orthopedics, sports medicine, and mixed-case ASC environments.
• Smith & Nephew Tenet Spider Shoulder Positioner
  Used in beach chair and lateral positioning for procedures such as rotator cuff and instability work. If your facility’s shoulder volume is growing, dedicated shoulder positioners help keep outcomes consistent and setups quick.
• Smith & Nephew T-max Storage Rolling Cart (OEM: 7210553)
  Don’t overlook storage. Purpose-built carts reduce missing components, speed up room turnover, and make it easier to move complete shoulder positioning kits between rooms or cases.
• Smith & Nephew Tenet T-max Non Operative Armboard (PN:7210559)
  A specialized armboard designed to stabilize and position the patient’s arm in non-operative contexts. Useful across mixed procedure environments where access and consistent arm placement matter.

4) Head, ENT, neuro, plastics: cranial and head supports

• Mayfield Headrest – Basic Headrest
  A solution designed for cranial stabilization in prone and supine positioning with mobility for head alignment. A practical option for facilities supporting ENT, neuro, and other cases where head positioning precision matters.
• Steris Narrow Headrest Lightweight, Radiolucent Head Support
  Designed to support access around the head while maintaining radiolucent performance—especially relevant in ophthalmic, ENT, neuro, and plastic surgery workflows where access and imaging matter at the same time.

5) Lateral positioning: peg boards and stabilization components

• Surgical Peg Board Positioner System for Lateral Positioning 50in
  Built for lateral positioning with radiolucent pegs and a gel pad—helpful for cases where lateral stability must coexist with imaging needs. A strong fit for many orthopedic and multi-specialty OR environments.

6) Imaging, fluoro, and pain management suites: radiolucent accessories that keep images clean

• Fluoro Extender Polycarbonate
  A radiolucent extender designed to insert under the tabletop pad without attachment hardware—useful for facilities that want flexible table placement support across fluoroscopy environments.
• Carbon Fiber Arm Board 6in wide- 2in Pad
  A radiolucent arm board with broad positioning range, designed to slide under the tabletop pad and fold for storage. Excellent for pain management and C-arm table workflows where imaging cleanliness matters.
• Carbon Fiber Arm Board 6in wide- 1in Pad
  Similar concept with a different pad profile—helpful when you’re standardizing across rooms but tailoring clinician preference.
• Spine Positioning System II 8 Piece System
  Built for the pain management suite and designed to improve visualization of spinal anatomy for injection workflows. If your facility performs high volumes of spine injections, dedicated systems can improve consistency from patient to patient.
• Interventional Supine Pillow System Contoured Pad and Support Wedge Pad
  Supports the patient’s neck and can help maintain cervical positioning while creating unobstructed working space—useful in interventional environments where access and comfort both matter.
• T-Rail Clamp – Imaging For CFPM tables w/ clamp groove- 6in long
  Designed for CFPM imaging tables and built to lock into position. Great when you need secure mounting points for compatible accessories in imaging-heavy rooms.
• T-Rail Clamp – Imaging Bariatric For CFPMB Table w/ Clamp Groove- 6in long
  A bariatric-oriented clamp option for CFPMB imaging tables—valuable for facilities planning for broader patient populations and room versatility.

7) Upper extremity and hand procedures: arm/hand tables and traction

• ISI Surgical Carter Hand Surgery Table
  Designed to accommodate stable traction and convert quickly—useful for dedicated hand surgery programs and orthopedic specialty rooms.
• Under Pad Mount Arm and Hand Surgery Table W/Single Leg
  A smart option when you’re working with tables or stretchers without side rails—fast setup and minimal disruption to the patient.
• 24” L Horizontal Traction Tower
  A stainless steel traction solution that adapts to many arm and hand table setups—relevant for facilities that want a robust traction workflow without fragile add-ons.
• Carter bent traction arm assembly
  A traction arm component that supports traction-based workflows. If you’re building or maintaining a hand table traction setup, having the right assemblies on hand reduces downtime between cases.
• TransMotion Medical Carter Hand Surgery Table
  Built for TransMotion Medical chair workflows and includes traction and transport/storage considerations (carrying case). Useful for facilities that run eye procedure or specialized chair-based procedural flows and want a consistent hand/arm platform.

8) Specialty table kits: packaging that helps standardize your setup

• Hana/ProFX Style Positioning Kit
  A procedural kit designed to fit the Hana/ProFx table system, including key components like a donut headrest, arm boards, straps, and protective covers. This is a practical option when your goal is standardization—consistent room setups, consistent staff expectations, and fewer missing components.

Quick buying guide: how we help facilities choose the right patient positioning equipment

When you’re selecting surgical positioning devices and accessories, here are the filters we recommend using first (because they prevent the most expensive mistakes):

• Procedure & position: beach chair, lithotomy, lateral, supine, prone, “off the end,” etc.
• Table compatibility: rail type, clamp style, required sockets/adaptors, and intended table models (especially for specialty extensions)
• Imaging requirements: radiolucent surfaces/components for fluoro and C-arm workflows
• Adjustability & repeatability: range of motion is great—repeatable indexing and easy resets are even better
• Cleaning & turnaround: wipe-clean surfaces, removable pads, and storage carts can significantly impact throughput
• Staff ergonomics: lift-assist and simplified adjustments reduce physical strain across high-volume days

Who benefits most from upgrading patient positioning equipment?

We see the biggest ROI when facilities are in one (or more) of these situations:

• ASCs scaling case volume and trying to reduce turnover time
• Hospitals standardizing rooms across different service lines and surgeon preferences
• Ortho / sports medicine teams doing high volumes of knee and shoulder procedures
• Pain management and interventional suites where imaging and access are constant constraints
• Urology programs that need table extensions and imaging-friendly accessories
• Hand surgery and upper extremity specialists building consistent traction workflows

FAQ: Patient positioning equipment

Do radiolucent positioning accessories really matter?

Yes—especially in C-arm and fluoro workflows. Radiolucent accessories help reduce imaging interference and can limit the need to reposition equipment mid-procedure.

Should we buy one universal system or specialty devices?

If you’re a mixed-case facility, it often makes sense to build a core “standard room kit” (head support, arm support, clamps, basic positioning) and then add specialty devices for high-volume lines (shoulder beach chair positioning, knee arthroscopy positioning, spine injection positioning, etc.).

Can patient positioning equipment help with turnover?

Absolutely. Standardized kits and storage/transport solutions (like dedicated carts) reduce missing components and speed up setup, teardown, and room reset.

Let’s get your positioning setup right

At Auxo Medical, we don’t just list equipment—we help you match patient positioning products to your procedures, your room constraints, and your workflow goals. If you’re building a new OR/ASC room, expanding an ortho program, or upgrading imaging-friendly positioning for a pain suite, start here:

Browse Patient Positioning Equipment or contact us and tell us what procedures you run, what tables you’re using, and what you want to improve (speed, imaging access, standardization, staff ergonomics, or all of the above).

The post Patient Positioning Equipment: Surgical Positioners & OR Table Accessories We Trust in Real-World Clinical Environments appeared first on Auxo Medical.

Below, we break down how to choose the right mobile C-arm, what features actually matter in real-world cases, and a curated sample of C-arm systems and related accessories currently listed in our C-Arms catalog.

What a C-Arm Does (and Why Choosing the Right One Matters)

A C-arm is a mobile fluoroscopy imaging system that provides real-time X-ray visualization during procedures. In practice, the “right” C-arm helps your team:

• Position faster and reduce “re-shoot” frustration with consistent image clarity
• Support minimally invasive techniques with live imaging and easy angles around the table
• Improve day-to-day efficiency with intuitive controls, storage, and workflow tools
• Manage radiation exposure through modern dose features and smarter imaging modes

Because C-arms sit at the intersection of clinical performance, room logistics, and long-term serviceability, the best choice is usually the one that fits your specialty mix, case volume, and staffing realities — not just the one with the biggest spec sheet.

New vs Reconditioned vs Refurbished C-Arms: How We Think About Value

In our C-Arms catalog, you’ll see equipment listed across condition types, including brand new, reconditioned, and refurbished options. Here’s a practical way to compare them:

• Brand new can be ideal for teams that want the latest platform, long runway, and standardized fleet planning.
• Reconditioned often targets a “best of both worlds” balance: strong performance with meaningful cost control.
• Refurbished is a common choice for ASCs, specialty clinics, and hospitals expanding capacity — especially when you want a proven model with a clear upgrade path.

We help facilities select a configuration that matches the work you actually do — orthopedic surgery, pain management, vascular access, urology, GI, and more — and we’ll talk through room constraints, imaging expectations, and service planning before you commit.

How to Choose the Best Mobile C-Arm for Your Facility

Detector Type: Flat Panel vs Image Intensifier

A major decision point is whether you want a flat panel detector system or an image intensifier based system.

• Flat panel detector C-arms are often chosen for modern workflow, crisp imaging, and advanced dose and positioning features. They’re especially attractive for demanding surgical environments.
• Image intensifier C-arms remain popular because they’re familiar, proven, and widely supported — a strong fit for many general surgery and orthopedic workflows.

Full-Size vs Mini C-Arm

If your imaging needs are focused on extremities (hands, wrists, feet, ankles), a mini C-arm can be a smart, space-friendly choice. If you need broader anatomy coverage and full fluoroscopy capability for common OR procedures, a full-size C-arm is typically the better fit.

Software Packages and Procedure Fit

Many systems are configured around procedure types (for example, general surgery packages versus vascular-oriented options). If your case mix includes vascular work, pain management, or high-volume orthopedic imaging, choosing the right package can have a bigger day-to-day impact than small spec differences.

Workflow Features That Matter in the OR

When teams tell us a C-arm “just works,” it usually comes down to practical workflow wins like clear positioning cues, fast setup, intuitive UI, strong image tools, and consistent results across users and shifts.

Featured C-Arm Systems and Accessories from Our Current Catalog

Here’s a representative sample of C-arms and C-arm-adjacent recording accessories currently listed in our C-Arms category. Availability can change, so the fastest path is to open the product page and request a quote.

Premium and Flat Detector Mobile C-Arms

• OEC GE OEC ELITE CFD 31cm Flat Detector Super C-Arm – VAS 15 Software Vascular Package
  A flat panel detector based OEC Elite CFD configuration designed for advanced mobile imaging with planning and workflow tools geared toward high-demand procedural environments.
• Philips Veradius Unity Flat Detector C-Arm
  A flat detector C-arm platform focused on surgical precision and efficient positioning, including workflow features like Position Memory and dose feedback tools.
• Siemens Cios Alpha C-arm with Vascular Package
  A compact, mobile flat detector C-arm designed for fluoroscopy and single-image acquisition across multiple surgical specialties, including vascular-oriented use cases.
• EXTRON 5 Premium C-Arm 30×30 Flat Detector
  A DRTECH flat-panel C-arm option positioned as a low-dose, high-end imaging solution for demanding surgical environments, paired with a large 4K monitor workflow.
• Fuji Persona CS Compact C-arm with 21cm Cesium Flat Panel Digital Detector
  A compact surgical C-arm built around a cesium iodide flat panel detector, designed for fast positioning and strong image quality across minimally invasive workflows.

Proven Image Intensifier Mobile C-Arms

• OEC 9900 Elite C-Arm, 12” with Vascular Package
  A vascular-configured OEC 9900 Elite setup built around an image intensifier workflow, aimed at teams that want strong imaging performance in interventional-style cases.
• OEC 9900 C-Arm, 12” Elite with General Surgery Package
  A general surgery focused OEC 9900 Elite configuration for full-size mobile fluoroscopy needs in busy surgical environments.
• OEC 9800 with 9″ Image Intensifier and ESP Package
  A widely recognized OEC platform for mobile fluoroscopy applications, paired with an expanded surgery oriented package for broad procedural coverage.
• OEC 9800 with 12″ Image Intesifier and ESP Package
  A full-size OEC 9800 configuration built around a larger image intensifier workflow, often selected when teams want familiar operation and strong procedural versatility.
• Ziehm Solo 9 in C-Arm
  A compact C-arm option with an integrated monitor, designed for crowded treatment environments such as pain management and orthopedic applications.
• Siemens Arcadis Avantic C-Arm 13” II
  A full-size Siemens C-arm platform commonly associated with flexible imaging workflows and options that support a wide range of procedural imaging needs.
• Genoray Z7000
  A full-size C-arm option positioned for pain management clinics, surgery centers, and hospitals that want a feature-forward platform with a straightforward interface.

Mini C-Arms for Extremity Imaging

• OEC 6800 MiniView C-Arm
  A mini C-arm option noted for touchscreen operation and image processing features designed to support clearer visualization in extremity workflows.
• OEC 6600 Mini C-Arm
  A portable mini C-arm platform designed for extremity imaging needs when space, mobility, and simplicity matter.
• Orthoscan Pulse Mini C-Arm with Flat Detector
  A mini C-arm with a flat detector approach and pulsed fluoroscopy, designed to support strong image quality and diagnostic confidence in extremity imaging.
• Hologic Floroscan InSight FD Mini C-arm
  A mini C-arm built around a thin-profile flat detector design for maneuverability, with features that support flexible positioning and efficient imaging.
• Hologic Fluoroscan Premier Encore Mini C-Arm
  A mini C-arm option focused on ease of use and productivity, supporting a range of magnification and imaging modes for extremity work.

C-Arm Video and Image Recording Accessories

If your goal includes teaching, documentation, case review, or capturing outputs from imaging sources in the room, dedicated medical recorders can make the process cleaner and more consistent.

• TEAC UR-4MD Medical Video Recorder
  A medical video recording device built for quick setup and straightforward use when capturing Full HD video in clinical environments.
• MediCapture MVR PRO 409 (Medical Video Recorder)
  A recording solution designed for operating rooms with multiple control options, including touchscreen operation and app-based remote control.
• MediCapture Medicap USB 200 Medical Image Recorder
  A USB-based recording device designed to simplify capturing and storing medical images and clips without building complex recording workflows.

What You Get When You Source a C-Arm Through Us

Buying a mobile C-arm is rarely just a transaction. It’s a project — one that affects surgeons, techs, administrators, and patients. We help you get the details right, including matching the system to your procedure mix and ensuring you have the documentation and support path you need.

• Quote-based purchasing support so you can align configuration, condition, and expectations
• Clear next steps through our product-specific quote request forms
• Practical guidance on choosing packages and options that actually fit your day-to-day cases

Some of our listed C-arm offerings also specify inclusions such as delivery and installation (by package), and some configurations call out documentation and warranty-related details directly on the product page. If those items are critical for your facility, we’ll help you confirm exactly what’s included for the system you’re considering.

Common Questions About Buying a C-Arm

What’s the difference between a full-size C-arm and a mini C-arm?

Full-size C-arms are typically selected for broader surgical use and general mobile fluoroscopy needs. Mini C-arms are often chosen for extremity imaging where compact size and fast positioning are priorities.

Should I choose a flat panel detector C-arm?

If your environment demands modern imaging workflow, advanced positioning tools, and a premium imaging experience, a flat panel detector C-arm can be a strong fit. For many facilities, image intensifier systems remain an excellent choice due to familiarity and wide support.

Do you offer multiple conditions (new, reconditioned, refurbished)?

Yes. Our C-Arms catalog includes brand new, reconditioned, and refurbished equipment, giving you flexibility to match budget and performance goals.

How do I get pricing and availability?

Open any product above and use the “Request Quote” option on the product page. We’ll respond with availability, configuration details, and practical guidance so you can move forward with confidence.

Ready to Choose the Right C-Arm?

If you want help selecting a mobile C-arm that fits your specialty, case volume, and imaging expectations, we’re here to make the process simpler. Start by exploring our C-Arms catalog and requesting a quote on the models that match your needs. We’ll help you compare options and move toward a purchase that supports great imaging, smooth workflow, and dependable day-to-day performance.

Explore the Available C-Arms Here:

The post C-Arm Machines for Sale: New and Refurbished Mobile C-Arms from Auxo Medical appeared first on Auxo Medical.

Patient monitoring is one of those areas where “good enough” isn’t good enough. Whether you’re managing high-acuity ICU patients, monitoring sedation in a procedure room, or running quick triage in an urgent care clinic, the right patient monitor helps your team spot changes early, document clearly, and standardize workflows across your facility.

At Auxo Medical, we support hospitals, surgery centers, clinics, and transport teams with a deep catalog of new, reconditioned, and refurbished patient monitors—including multi-parameter bedside monitors, portable transport monitors, vital signs spot-check devices, and capnography (EtCO2) solutions. Below is a practical, SEO-friendly guide to choosing the right system, with a sampling of patient monitors and accessories from our catalog.

Browse the full catalog here: Patient Monitors

What a Patient Monitor Should Do (Beyond “Show Vitals”)

When teams shop for a patient monitor, it’s easy to focus on a short checklist—ECG, SpO2, NIBP, temperature, respiration. But the real value of modern patient monitoring is how well a device fits your workflow and your acuity level:

• Match the acuity: A med-surg floor has different needs than the OR, ICU, or PACU.
• Scale your parameters: Modular platforms let you start with core vitals and add capabilities like invasive blood pressure (IBP), CO2 monitoring, or anesthesia gas analysis.
• Support transport and continuity: If patients move (ED → imaging → OR → PACU), portability and pickup-and-go workflow matter.
• Improve documentation: Integrated printers, data storage, and connectivity can reduce charting friction and improve consistency.
• Keep clinicians focused: Clear displays, intuitive controls, and sensible alarm configuration reduce cognitive load.

Quick “Best Fit” Guide (Sample Products from Our Patient Monitor Catalog)

If you want a shortcut, here are common buying scenarios—and real products we carry that often fit those needs.

High-acuity monitoring (ICU, OR, critical care)

• GE CARESCAPE B850 Patient Monitor (high-acuity versatility for OR/ICU workflows)
• Mindray DPM6 PACU Monitor w/ 12 lead Masimo MPM (modular, built for PACU and also used across ICU/OR environments)
• Philips IntelliVue MX700 Bedside Patient Monitor (bedside monitoring with an expanded real-time view)
• Drager Infinity Delta w/ 5 Agent Analysis (bedside-to-transport continuity with broad parameter support)

Bedside monitoring with EtCO2 (capnography) included

• GE B40 Patient Monitor w/ EtCO2
• GE B40 Patient Monitor 5 Agent Analysis & EtCO2
• GE Dash 4000 Patient Monitor W/ CO2

Portable and transport-friendly patient monitoring

• GE Dash 5000 Paitent Monitor w/ Sidestream EtCO2 (designed for hospital and transportation settings)
• Mindray Passport 8 Patient Monitor with Sidestream EtCO2 (portable, modular, and expandable)

Fast vital signs spot-check (clinics, triage, intake)

• Welch Allyn Spot Monitor with NIBP and Temperature (quick vitals workflows)
• Cleo Compact SpO2 and NIBP Monitor (portable spot-check flexibility)
• Biolight V9 Vital Signs Capnography (vitals plus EtCO2 options for triage/monitoring profiles)

Spotlight: Multi-Parameter Bedside Patient Monitors (ICU, OR, PACU, Step-Down)

Multi-parameter bedside monitors are the backbone of inpatient monitoring. The best fit depends on how sick your patients are, what parameters you need today, and what you may need to add later.

GE CARESCAPE monitoring for high-acuity workflows

If your priority is a high-acuity monitoring platform that supports efficient clinician workflow across critical areas, take a look at the GE CARESCAPE B850 Patient Monitor. This type of platform is commonly selected for environments where clinician speed, clarity, and adaptability matter—like the ICU and operating room.

Mindray modular monitoring for PACU + ICU/OR capability

PACU monitoring is unique: patients may be stable one minute and trending in the wrong direction the next. That’s why many teams prefer monitors that combine clear visualization, strong alarm control, and room to expand parameters.

The Mindray DPM6 PACU Monitor w/ 12 lead Masimo MPM is a strong example of a modular patient monitor used for post-anesthesia care and also deployed across ICU/OR use cases when advanced parameters are required.

And when you need a dedicated module to add capabilities inside compatible Mindray ecosystems, the Mindray MPM Masimo Set Mortara Module SpO2/ ECG/ NIBP/ 2-IBP 2-Temp (115-022715-00) is an option we carry for multi-parameter monitoring expansion in supported monitors.

Philips IntelliVue bedside monitoring visibility

For teams standardized on Philips ecosystems—or teams that want a bedside monitor designed to provide an expanded real-time view—consider the Philips IntelliVue MX700 Bedside Patient Monitor. Bedside monitors like this are often selected for patient rooms, step-down units, and higher-acuity areas where clinicians want more information visible at a glance.

Continuity from bedside to transport

When patient movement is constant, continuity becomes a safety feature. The Drager Infinity Delta w/ 5 Agent Analysis is an example of a monitor designed around the concept of staying with the patient from bedside to transport, while supporting a broad range of monitoring parameters.

Capnography (EtCO2) Monitoring: Where It Matters Most

Capnography (EtCO2 monitoring) helps teams understand ventilation status by measuring exhaled CO2 and displaying a waveform (capnogram). In real-world clinical workflows, EtCO2 is often prioritized in environments like:

• Procedural sedation (where ventilation can change quickly)
• PACU (post-anesthesia respiratory vigilance)
• Transport (fewer hands, fewer seconds to interpret change)
• Respiratory monitoring programs (spot-check or continuous strategies)

Standalone/portable capnography + SpO2 monitoring

For teams that want a portable pulmonary and vital signs approach, the Medtronic Capnostream 20p Beside Monitor is a focused solution built around EtCO2 and SpO2 monitoring in a portable format.

Capnography modules to expand your monitoring setup

Sometimes you don’t need to replace the whole monitor—you just need to add reliable CO2 monitoring. We carry multiple CO2 module options, including:

• Respironics CO2 Monitoring Module (a flexible CO2 module approach that supports mainstream/sidestream interchangeability)
• Respironics CO2 Monitoring Module Only M2741A (a dedicated EtCO2 module option for capnogram-based respiratory monitoring workflows)

All-in-one vital signs + EtCO2 for spot-check and bedside mobility

If your goal is to keep workflows simple—especially in triage, intake, or mixed-use environments—an all-in-one vital signs monitor with EtCO2 can be a practical fit. Two examples from our catalog include:

• Biolight V9 Vital Signs Capnography (integrated vitals + EtCO2 with multiple clinical profiles)
• Cleo Compact EtCO2 Monitor with Vitals (bedside + mobile spot-check flexibility in a compact form factor)

Transport & Portable Patient Monitors: Designed for Movement

Transport monitoring is its own category because the environment is harsher: tighter spaces, fewer staff, constant motion, and frequent transitions. The best transport patient monitor is the one your team can set up quickly, read instantly, and trust while moving.

GE Dash series for portable monitoring with EtCO2

If you’re looking for a portable monitor that’s commonly deployed across hospital and transport settings, the GE Dash 5000 Paitent Monitor w/ Sidestream EtCO2 is a strong example of a transport-friendly, parameter-rich monitoring platform.

For teams that want a full-feature monitor with CO2 monitoring included, the GE Dash 4000 Patient Monitor W/ CO2 is another widely recognized option for continuous monitoring workflows that include capnography.

Mindray Passport for modular portability

The Mindray Passport 8 Patient Monitor with Sidestream EtCO2 is built around portable monitoring with modular expandability—useful for facilities that want a consistent monitoring experience as patients move between departments or acuity levels.

Vital Signs & Spot-Check Monitoring: Clinics, Triage, Intake, and Rounding

Not every environment needs a full bedside monitor. In many clinics and outpatient workflows, speed and simplicity matter most: blood pressure, pulse rate, temperature, and SpO2—captured reliably and efficiently.

Fast vital signs workflows (NIBP + temperature)

The Welch Allyn Spot Monitor with NIBP and Temperature is a popular style of solution for intake and rounding workflows where quick vital signs checks are the main job.

Portable SpO2 + NIBP spot-check flexibility

If you want a lightweight, portable device that can move from room to room or work in mixed-use environments, the Cleo Compact SpO2 and NIBP Monitor is designed for spot-check flexibility in bedside and mobile scenarios.

Don’t Forget the Workflow: Mounts & Mobile Stands for Patient Monitors

One of the most overlooked parts of patient monitoring is the physical workflow. How a monitor is mounted can affect visibility, cable organization, and how fast staff can reposition equipment between patients.

• Patient Monitor Mobile Stand – Universal (a practical option when you need to move monitors between rooms or bays)
• Philips InvelliVue MP5 Fixed Wall Mount Kit (wall-mount setup designed for tilt/rotate adjustment and cable organization)
• Adjustable Swivel and Tilting Monitor Wall Mount – Universal (universal wall-mount approach with swivel/tilt positioning)

Industries & Departments That Benefit from the Right Patient Monitor

We commonly help organizations choose patient monitors for environments like:

• Hospitals and health systems: ICU patient monitoring, step-down units, med-surg floors, and rapid response workflows
• Operating rooms (OR) and anesthesia care: monitoring setups that prioritize clear display, configurable parameters, and optional gas/capnography expansion
• PACU and perioperative services: post-anesthesia monitoring where respiratory and cardiac trends matter minute-to-minute
• Ambulatory surgery centers (ASC): efficient, standardized monitoring for pre-op, intra-op, and recovery workflows
• Urgent care and outpatient clinics: fast spot-check vital signs monitoring for intake, triage, and provider assessment
• Transport teams: portable and transport patient monitors that support continuity during movement

Patient Monitor FAQ (Commom Questions We Hear)

What’s the difference between a vital signs monitor and a multi-parameter patient monitor?

A vital signs monitor is typically optimized for fast spot-checks (like NIBP, SpO2, pulse rate, temperature). A multi-parameter patient monitor is designed for continuous bedside monitoring and often supports expanded parameters (like IBP and EtCO2) plus deeper trending, alarms, and workflow customization.

Do you carry patient monitors with capnography (EtCO2)?

Yes. We carry multiple options that include EtCO2 monitoring as part of the monitor (such as the GE B40 Patient Monitor w/ EtCO2 or the GE Dash 4000 Patient Monitor W/ CO2) and we also carry capnography-focused devices and modules (like the Medtronic Capnostream 20p Beside Monitor and Respironics CO2 Monitoring Module).

Why do facilities consider refurbished patient monitors?

Many facilities choose refurbished patient monitors to standardize across departments, expand capacity, or replace aging units while managing budget. Refurbished equipment can be especially helpful when you need to deploy multiple monitors quickly (for example: opening new bays, updating a PACU, or equipping transport teams).

Can you help us choose the right patient monitor for our department?

Yes—this is exactly what we do. If you tell us your care area (ICU, OR, PACU, clinic, transport), required parameters (ECG, SpO2, NIBP, IBP, temperature, respiration, EtCO2), and mounting needs, we can help you narrow options and build a consistent monitoring plan.

Ready to Compare Patient Monitors?

Start by browsing our catalog of Patient Monitors. If you already know what you need, you can request a quote directly from the product pages. If you’re building a department standard (or replacing multiple units), we can help you compare configurations so you get the right mix of bedside monitors, transport monitors, capnography solutions, and mounting accessories—without overbuying.

The post Patient Monitors for Every Care Setting: How We Help You Choose the Right Monitor (with Real Product Examples) appeared first on Auxo Medical.

At Auxo Medical, we help facilities create efficient, high-quality radiography environments with Fuji digital radiography (DR) suites and X-ray tables. These solutions support fast patient throughput, excellent image quality, and ergonomic workflow in hospitals, outpatient imaging centers, and orthopedic clinics.

Why Choose Fuji DR Rooms and Tables

Modern DR rooms combine a reliable X-ray source, detector, and workstation with a durable table that simplifies positioning. Fuji systems are designed for consistent results across general radiography, extremities, and follow-up studies.

Fuji DR Suites We Offer

• Fuji FDR Essentia FS Digital Radiography Suite – Space-efficient design with intuitive controls for everyday imaging.
• Fuji FDR Clinica X Radiology Suites – Scalable options that fit a wide range of facility sizes.
• Fuji Digital Radiography U-arm System w/ 17×17 Detector and FDX Console Workstation – Compact U-arm configuration for versatile positioning.

Industries and Use Cases

• Hospitals and radiology departments: High-volume chest, abdomen, and extremity exams
• Outpatient imaging centers and urgent care: Fast room turnover and efficient workflows
• Orthopedic and sports medicine clinics: Repeatable positioning for follow-up studies

Fuji X-Ray Tables for Comfortable, Reliable Positioning

• Fuji Carbon Fiber Top Adjustable Height X-ray Table (P/N: 800051360)
• Fuji Laminate Top Adjustable Height X-ray Table (P/N: 800051359)
• Fuji Carbon Fiber Top Fixed Height X-ray Table (P/N: 800051331)
• Fuji Laminate Top Fixed Height X-ray Table (P/N: 800051332)

Who Benefits Most

• General radiology departments needing durable, radiolucent surfaces
• Outpatient clinics with lean staffing that value ergonomic tables
• Multi-specialty practices performing a mix of routine and specialized exams

At Auxo Medical, we match the right Fuji DR room and table combination to your space, patient volume, and clinical needs. Contact Auxo Medical today or request a quote from the products below:

The post Fuji DR Rooms & X-Ray Tables – Building Complete Radiography Solutions at Auxo Medical appeared first on Auxo Medical.