Fraud Blocker
Quality Assurance - Refurbished Sterilizer | Auxo Medical

Troubleshooting an Autoclave: A Comprehensive Guide

August 21, 2023
, , , , , Articles

Autoclaves, the powerful machines that use steam under pressure to sterilize equipment and other objects, are essential in a range of industries, from healthcare to food processing. However, like any piece of equipment, they can sometimes encounter problems. This article will guide you through the troubleshooting process for an autoclave, helping you to identify and resolve common issues.

Common Autoclave Problems and Solutions

1. Autoclave Won’t Start

If your autoclave refuses to start, the first step is to check the power supply. Ensure the machine is plugged in and the circuit breaker hasn’t tripped. If everything seems fine with the power, the issue could be with the door. Autoclaves have safety features that prevent operation if the door isn’t properly sealed. Check the door seal for any damage and ensure it’s closed tightly.

2. Slow Warm-Up

If your autoclave takes longer than usual to warm up, the problem could be due to a few factors. First, check the water level in the reservoir. An insufficient water level can cause the autoclave to heat up slowly. If the water level is fine, the issue could be a malfunctioning heating element or a faulty thermostat. In this case, consult the manufacturer’s manual for instructions on how to test and replace these components.

3. Incomplete Sterilization

If your autoclave isn’t achieving proper sterilization, check the following:

  • Loading: Ensure items are loaded correctly, with enough space between them for steam to circulate. Overloading the autoclave can lead to incomplete sterilization.
  • Cycle Time and Temperature: Verify that the correct cycle time and temperature settings are being used for the items being sterilized. Consult your autoclave’s manual for recommended settings.
  • Steam Quality: Ensure the steam being produced is of good quality. Poor steam quality can result from using hard water, which can leave mineral deposits in the autoclave, affecting its performance. Use distilled water to avoid this issue.

4. Wet Loads

If you find that items are still wet after a sterilization cycle, the issue could be related to the drying phase. Check the following:

  • Drying Time: Ensure the drying time is set correctly and allow for adequate drying time after the sterilization cycle.
  • Door Gasket: Inspect the door gasket for damage or leaks, as this can allow steam to escape and prevent proper drying.
  • Ventilation: Ensure the autoclave is well-ventilated and not placed in an enclosed space, as this can hinder the drying process.

5. Error Codes

Many modern autoclaves display error codes when something goes wrong. These codes can help you identify the specific issue with your machine. Consult your autoclave’s manual for a list of error codes and their corresponding meanings.

Regular Maintenance for Optimal Performance

To keep your autoclave functioning optimally, regular maintenance is crucial. Here are some maintenance tasks you should perform routinely:

  1. Clean the Chamber: After each use, wipe the chamber with a soft cloth to remove any residue. Regularly clean the chamber with a non-abrasive cleaner to prevent buildup of dirt and grime.
  2. Inspect the Door Gasket: Check the door gasket for damage, such as cracks or wear, and replace it if necessary. A damaged gasket can lead to leaks and poor sterilization.
  3. Clean the Water Reservoir: Empty and clean the water reservoir regularly to prevent mineral deposits and bacterial growth. Use distilled water to fill the reservoir.
  4. Check Filters and Valves: Inspect and clean filters and valves as recommended by the manufacturer. Replace them if necessary.
  5. Lubricate Moving Parts: Lubricate door hinges, latches, and other moving parts as recommended by the manufacturer to ensure smooth operation.

When to Call a Professional

While many autoclave issues can be resolved through troubleshooting and regular maintenance, there are instances when you should seek the help of a professional:

  1. Electrical Issues: If you suspect an electrical problem, such as a malfunctioning heating element or thermostat, it’s best to consult a professional technician to avoid the risk of injury or further damage to the autoclave.
  2. Persistent Problems: If you’ve tried troubleshooting and the issue persists, it’s time to call a professional. They can diagnose and resolve the problem more efficiently.
  3. Calibration: Autoclaves should be calibrated regularly to ensure accurate temperature and pressure readings. This process should be performed by a professional to ensure proper calibration.

Call the Professionals at Auxo Medical for Autoclave Preventive Maintenance and Repair

If you are in need of autoclave preventive maintenance or repair services, look no further than Auxo Medical. With our team of highly skilled professionals, we specialize in providing top-notch services to ensure the optimal functioning of your autoclave equipment. Whether you need routine maintenance to prevent any potential issues or immediate repair work, Auxo Medical has got you covered. We understand the importance of having a reliable autoclave system in various industries, such as medical, dental, and laboratory settings. By entrusting your equipment to our professionals, you can have peace of mind knowing that they will diagnose and address any issues efficiently and effectively. Don’t compromise on the quality and functionality of your autoclave – call the professionals at Auxo Medical today! Toll-Free: (888) 728-8448.

 

Auxo Medical - High Quality Reliable New and Refurbished Medical Equipment Maintenance and Repair

Auxo Medical Your Anesthesia, Biomed and Sterile Processing Equipment Maintenance & Repair Solution in the Mid-Atlantic Region

August 18, 2023
, , , , , , , , , , Articles

An Overview of Auxo Medical

Auxo Medical is a trusted provider of maintenance and repair services for anesthesia, biomed, and sterile processing equipment in the Mid-Atlantic Region with headquarters in Richmond, VA servicing Virginia, Washington D.C., Maryland and North Carolina. With over 30 years in the medical equipment industry, Auxo Medical has established itself as a reliable and affordable solution for local clinics, hospitals, veterinary practices, and surgery centers.

Our team of highly skilled technicians has expert knowledge on the latest technology and equipment available to ensure that our customers and clients receive the best possible service. Auxo Medical provides a range of services including preventive maintenance solutions, repairs for broken or damaged equipment, as well as new and refurbished medical equipment options. Auxo Medical is committed to providing exceptional customer service to all its clients by offering personalized solutions that meet their unique needs.

The Importance of Proper Sterile Processing Equipment Maintenance

Proper maintenance of sterile processing equipment is critical in healthcare settings. The sterilization process is essential to ensuring that medical equipment and supplies are safe for patient use. Sterile instruments prevent the spread of infections and diseases, which is particularly important during surgical procedures.

Inadequate maintenance can result in ineffective sterilization, which can lead to infection transmission. For this reason, it’s essential to maintain proper sterile processing equipment maintenance schedules and adhere to manufacturer instructions carefully. Regular cleaning, inspections, and preventive maintenance ensure that your equipment performs effectively and reliably throughout its lifespan.

Proper sterile processing equipment maintenance plays a vital role in ensuring patient safety and effective medical care delivery. Investing time and resources into regular inspections, cleaning routines, preventive maintenance programs will not only help maintain the integrity of your medical instruments but also provide peace of mind for both patients and healthcare staff.

Biomedical and Anesthesia Equipment Maintenance and Repair

Proper maintenance and repair of biomedical and anesthesia equipment are crucial for patient safety, as well as the efficiency of healthcare operations. At Auxo Medical, we understand the importance of reliable medical equipment, which is why we offer comprehensive maintenance and repair services for a variety of machines, including anesthesia machines, ventilators, defibrillators, infusion pumps, ECG monitors, and more.

We have AAMI Certified Biomedical Equipment Technicians (CBET) on staff and all biomedical preventative maintenance, repairs and calibrations onsite are conducted by trained technicians to keep you operating under NFPA99 standards and AAMI recommendations. Our team of professional technicians is trained to provide prompt and effective repairs for all types of medical equipment. Whether you need a quick fix or a complete overhaul, we have the expertise to get your equipment back up and running in no time. We also offer preventative maintenance solutions tailored to your specific needs to ensure that your equipment is always functioning at its best.

Preventative Maintenance Solutions for Anesthesia Equipment

Anesthesia equipment is among the most critical medical equipment used during surgical procedures. It is essential to ensure that these machines are always in excellent working condition to prevent complications during surgery. Preventative maintenance solutions such as regular inspections, cleaning, and calibration can help to ensure that anesthesia equipment functions optimally when required.

Auxo Medical offers customized preventative maintenance solutions for anesthesia equipment to ensure that clients’ machines operate at peak performance levels. The company’s team of highly skilled technicians will perform preventative maintenance procedures, including scheduled check-ups, replacement of worn-out parts and calibration of the machines’ controls to keep them running smoothly. Regular preventative maintenance will not only extend the life of anesthesia equipment but also reduce unnecessary downtime due to unexpected breakdowns.

The Benefits of Refurbished Medical Equipment

Refurbished medical equipment is a cost-effective solution that provides various benefits to healthcare facilities. One of the main advantages is the significant cost savings compared to purchasing new equipment. Refurbished equipment can save facilities up to 50% or more on their equipment costs while still providing high-quality performance and accuracy.

Another advantage of refurbished medical equipment is the positive impact on the environment. By refurbishing and reusing existing equipment, it reduces waste, saves energy, and helps reduce carbon emissions associated with manufacturing new machines. Furthermore, refurbished equipment undergoes a rigorous full teardown and rebuild process with new and reconditioned parts along with testing and quality control checks before being sold or rented out, ensuring that it meets or exceeds industry standards for safety and effectiveness.

When healthcare facilities opt for refurbished medical equipment from companies like Auxo Medical, they get high-quality products at a fraction of the cost associated with buying new. Additionally, refurbishing used medical instruments is an environmentally friendly way to cut down on waste while also improving patient care in hospitals and clinics. As such, healthcare providers can benefit significantly from investing in this affordable alternative without compromising quality or safety.

Top Brands and Products in Sterile Processing Equipment as well as Biomedical and Anesthesia Equipment

Auxo Medical is proud to offer top-quality brands in the field of medical equipment maintenance and repair. One of the leading brands in sterile processing equipment is Steris, which offers a range of products such as sterilizers, washer-disinfectors, ultrasonic cleaners and steam generators. Their products are known for their reliability, ease-of-use, and efficiency. Steris also provides a wide range of other medical equipment such as surgical tables, surgical lighting and warming cabinets.

In terms of biomedical equipment maintenance and repair solutions, Auxo Medical procures Mindray to provide top-of-the-line anesthesia machines. Mindray’s machines are designed with advanced technology to ensure patient comfort and safety during surgical procedures. Additionally, they have built-in monitoring features to help anesthesiologists manage their patients’ vital signs with precision.

Auxo Medical understands the importance of utilizing high-quality medical equipment in healthcare settings. That’s why we only provide brands that we trust will deliver reliable results for our clients. Our team has extensive experience working with these leading brands and can provide expert advice on which products will best suit your facility’s specific needs.

How Auxo Medical Services Local Clinics, Hospitals, Veterinary Practices, and Surgery Centers

Auxo Medical is dedicated to providing high-quality service to a wide range of healthcare providers in the Mid-Atlantic Region. Whether you are a small clinic or a large hospital, veterinary practice or surgery center, we have the expertise and experience to meet your needs.

In business over 20 years, and with over a century of combined experience working with medical equipment, we understand the unique challenges that come with maintaining and repairing anesthesia, biomed and sterile processing equipment. We work closely with our clients to develop customized solutions that meet their specific needs.

From routine maintenance to emergency repairs, we are committed to providing fast, reliable service that ensures your equipment is operating at its best. When you partner with Auxo Medical, you can rest assured that your medical equipment is in good hands.

Our technicians are highly trained and possess the knowledge needed to diagnose problems quickly and efficiently. We offer on-site repairs as well as off-site services for more complex issues. We understand how important it is for your medical equipment to be fully operational at all times. That’s why we offer 24/7 emergency repair so you can get help when you need it most.

We take pride in our ability to provide exceptional customer service and support. Our team is always available to answer questions or address concerns you may have about your medical equipment. Contact us today to learn more about how Auxo Medical can help keep your healthcare facility running smoothly.

The Company’s Reliable and Affordable Solutions for Mid-Atlantic Region Clients

Auxo Medical provides reliable and affordable solutions for clients in the Mid-Atlantic region. We offer a range of services including maintenance, repair, and sales of sterile processing equipment, biomedical equipment, and anesthesia equipment. With our team of highly trained professionals, Auxo Medical ensures that all our clients receive top-notch services to keep their medical facilities running smoothly.

One of the major advantages of working with Auxo Medical is our commitment to providing cost-effective solutions without compromising on quality. We understand the financial constraints that many medical facilities face and strives to offer competitive pricing options. Additionally, we offer special financing through Ascentium Capital LLC to allow clients the option to more fully outfit their facility with all the necessary equipment for their practice’s success.

Overall, Auxo Medical’s reliable and affordable solutions make them an ideal partner for any medical facility in the Mid-Atlantic region looking for high-quality equipment maintenance and repair services. Our commitment to customer satisfaction ensures that clients receive exceptional service at every step along the way. View our online catalogue of over 1100 medical equipment products and parts or contact us today for a customized quote by calling  (804) 233-4424.

The Commitment to Exceptional Customer Service

At Auxo Medical, we understand that our success is dependent on the satisfaction of our clients. That’s why we are committed to providing exceptional customer service every step of the way. Our team of experienced professionals is dedicated to ensuring that all of your medical equipment needs are met with the highest level of quality and care.

We believe that building strong relationships with our clients is essential to delivering outstanding service. From answering questions and providing guidance to offering quick and reliable maintenance and repair solutions, we go above and beyond to ensure that your experience with us is positive and stress-free.

We also prioritize clear communication, timely responses, and transparency throughout the entire process. You can count on us for honest advice, fair pricing, and dependable follow-through. We take pride in being a trusted partner for all your anesthesia, biomed, and sterile processing equipment procurement as well as maintenance and repair needs.

Whether you’re a local clinic or a large hospital in the Mid-Atlantic region, Auxo Medical is here for you. Contact us today to learn more about how we can help you maintain high-quality medical equipment while reducing costs through preventative maintenance solutions.

Contact Auxo Medical for all your Medical Equipment Needs

As a reliable and customer-focused medical equipment maintenance and repair provider, Auxo Medical is dedicated to providing top-notch services to its clients. With decades of experience in the industry, we understands the importance of quality medical equipment for healthcare facilities and practices.

Auxo Medical offers a wide range of services tailored to meet the specific needs of each client. Whether you are in need of anesthesia, biomedical, or sterile processing equipment maintenance and repair solutions, Auxo Medical has got you covered. From preventative maintenance solutions to emergency repairs, our team of experts is always ready to provide customized solutions that meet your unique needs.

If you are looking for reliable, affordable medical equipment maintenance and repair solutions in the Mid-Atlantic region, look no further than Auxo Medical. Contact us today to learn more about our services or schedule an appointment.

What is a Washer-Disinfector and How Does it Work?

August 14, 2023
, , , , , , , , , Articles

What is a Washer-Disinfector and Why is it Important?

Tiva 8 Narrow Design Undercounter Washer DisinfectorA washer-disinfector is an essential piece of equipment in medical, laboratory, and clinic settings. It is a machine that combines the processes of washing and disinfecting to ensure optimal cleanliness of medical equipment, surgical instruments, glassware, and other tools used in these settings.

Washer-disinfectors are important because they help prevent the spread of infections. In healthcare facilities, infection control is crucial to protect patients from exposure to pathogens. Sterilization of instruments and equipment plays a significant role in preventing the transmission of diseases from one patient to another. A washer-disinfector can provide a high level of assurance that items are clean and safe for use by removing both visible dirt and microorganisms that may be present on surfaces. Overall, this makes it easier for healthcare providers to maintain their cleanliness standards while keeping patient safety at the forefront.

The Benefits of Using a Washer-Disinfector in Medical, Laboratory, and Clinic Settings

A washer-disinfector is a crucial piece of equipment for maintaining cleanliness in medical, laboratory, and clinic settings. One of the key benefits of using a washer-disinfector in these environments is that it can effectively eliminate harmful bacteria and microorganisms from surfaces that cannot be sterilized with other methods.

Another major benefit of using a washer-disinfector is that it provides a more efficient method for cleaning and disinfecting medical equipment. Compared to manual cleaning methods, using a washer-disinfector can reduce the risk of cross-contamination and save time for healthcare professionals who need to prioritize patient care.

Investing in a high-quality washer-disinfector can provide numerous benefits for maintaining cleanliness and safety in medical facilities. By effectively eliminating harmful bacteria and saving time on cleaning procedures, healthcare professionals can focus on providing optimal care for their patients without worrying about the spread of infection or disease.

How Does a Washer-Disinfector Work?

A washer-disinfector uses a combination of high-pressure water sprays, detergents, and heat to remove debris, bio-burden, and microorganisms from the equipment. The process typically begins with a prewash cycle using cold water to remove larger debris. The next step involves using hot water sprays with detergents to clean the items. Once the cleaning is complete, the washer-disinfector moves into the disinfection phase where it heats up water to temperatures above 82 degrees Celsius for a specific period of time to kill any remaining microorganisms.

The final step in this process is drying by using either forced air or vacuum drying methods depending on the type of equipment being cleaned. By utilizing this multi-step process, washer-disinfectors effectively eliminate cross-contamination and can be relied upon to produce highly sanitized supplies for use in medical procedures or experiments.

The Advantages of Investing in a New or Refurbished Washer-Disinfector

Getinge 46 Washer-DisinfectorAs an essential piece of equipment for medical, laboratory, and clinic settings, investing in a new or refurbished washer-disinfector has several advantages that can benefit your facility in multiple ways. One major advantage of investing in a new or refurbished washer-disinfector is the reduced risk of contamination and infection. A sterilizer may not be enough to fully eliminate contaminants, but a washer-disinfector works differently by using chemicals, high-pressure water, and heat to thoroughly clean and disinfect items. This not only protects patients from infection but also protects healthcare providers from exposure to hazardous substances.

While purchasing a new machine may not be finically feasible, a refurbished washer-disinfector may be a cost effective solution for your facilities needs. By opting for a refurbished machine, facilities can save a significant amount of money while still meeting their requirements. These refurbished washers have undergone a thorough inspection, repair, and cleaning process to ensure they are in excellent working condition. With the affordability of refurbished washer-disinfectors, facilities can invest their budget in other essential areas, making it a practical choice for those looking to make the most of their resources.

Overall, investing in a new or refurbished washer-disinfector has significant benefits for both patient care and facility management needs. With reduced contamination risks and cost savings opportunities, this investment is well worth considering for any healthcare provider looking to provide top-quality care while maintaining an efficient operation.

Regular Maintenance: Preventative Maintenance Plans for Your Washer-Disinfector

A washer-disinfector is a critical piece of equipment that must be maintained regularly to ensure optimal performance. Investing in a preventative maintenance plan through Auxo Medical can save you money in the long run, reduce downtime and improve overall efficiency. Regular maintenance of your washer-disinfector will extend its lifespan, prevent costly breakdowns and reduce the risk of contamination.

Preventative maintenance plans typically include regular inspections, cleaning, and calibration of your machine. During an inspection, our technicians will check for any wear and tear on parts that may need replacement soon. Cleaning involves removing any debris, grease or residue from the machine to prevent the buildup of bacteria or other contaminants. Calibration ensures that your machine is working within its specifications and performs optimally.

With regular maintenance and preventative care, you can avoid unexpected breakdowns or costly repairs. Additionally, by investing in preventative care plans with professional technicians such as those offered by Auxo Medical, you are ensuring that your staff remains safe while operating this vital equipment.

Emergency Repair Services for Your Washer-Disinfector

Despite regular maintenance and care, washer-disinfectors can experience sudden malfunctions that require immediate repair. When this happens, it’s important to contact a Auxo Medical for quick and reliable emergency repair services.

Emergency repair services are designed to address critical issues quickly and efficiently, minimizing downtime and preventing further damage. A skilled technician will come to your facility as soon as possible, diagnose the problem, and provide a prompt solution.

At Auxo Medical, we understand how important it is to have access to emergency repair services when you need them most. That’s why we offer 24/7 emergency repair services to our clients. Our team of technicians is highly trained and experienced in repairing all types of washer-disinfectors from different manufacturers.

No matter the issue with your machine, we have the expertise and resources needed to get it back up and running as soon as possible. Don’t let an unexpected breakdown impact your operations or compromise patient safety; trust Auxo Medical for all your washer-disinfector repair needs.

Other Sterilization Equipment: Autoclaves and Sterilizers

In addition to washer-disinfectors, there are other sterilization equipment options available for medical, laboratory, and clinic settings. Autoclaves and sterilizers are two popular options that offer a different way of achieving sterile instruments and equipment.

Autoclaves use high-pressure steam to kill bacteria, viruses, fungi, and other microorganisms on equipment surfaces. They work by increasing the temperature inside the chamber to above 100°C, which creates steam that penetrates the industrial-grade plastics or metal walls of the device being sterilized. It is an effective method for killing bacteria and spores.

Sterilizers may use also use chemicals such as hydrogen peroxide or peracetic acid to achieve disinfection or sterilization. They work by releasing vaporized chemicals into the device chamber until it reaches a certain concentration level that kills microorganisms at different levels of complexity.

While washer-disinfectors have become popular in recent years due to their efficiency at cleaning instruments with minimal human intervention, autoclaves and sterilizers remain staples in many medical settings. Each has its own benefits depending on the nature of your operation. If you’re unsure which option is best for your specific needs, consult with one of  our trusted professionals who can help guide you in selecting the right solution.

Contact Auxo Medical for Your New or Refurbished Washer-Disinfector as well as Maintenance and Repair

If you’re in the market for a new or refurbished washer-disinfector, look no further than Auxo Medical. Our team is proud to offer a wide selection of high-quality washer-disinfectors designed to meet your specific needs and budget requirements, as well as expert maintenance and repair services to keep your equipment in top working condition. Contact us today to learn more about our products and services.

Medical Equipment Sales and Consulting | Auxo Medical

Medical Equipment Sales Consultation & Support Available from Auxo Medical

August 11, 2023
, , , , Articles

Medical Equipment Sales Consultation & Support

As the healthcare industry continues to evolve, so does the need for reliable and efficient medical equipment. From hospitals to clinics, practitioners rely heavily on medical equipment to provide the best possible care to their patients. However, with the vast array of medical equipment available on the market, it can be difficult for healthcare providers to determine which devices are best suited for their needs.

This is where Auxo Medical’s equipment sales consultation and support comes in. Medical equipment sales consultants work closely with healthcare providers to identify their specific needs and recommend the most appropriate equipment for their practice. They take into account factors such as budget, patient volume, and technological advancements to provide tailored solutions that improve patient outcomes and streamline operations.

Benefits of Medical Equipment Consulting & Support

One of the primary benefits of a medical equipment sales consultation through Auxo Medical, is the ability to save time and money. Rather than spending hours researching and comparing various equipment and configurations, healthcare providers can rely on the expertise of Auxo Medical’s sales consultants to identify the most effective solutions for their practice. This not only saves time but can also save money in the long run by preventing costly equipment purchases that may not be necessary.

In addition to equipment sales, medical equipment sales consultants also provide ongoing support and maintenance options for the devices we sell. This includes installation, training, and troubleshooting to ensure that the equipment is functioning at its optimal level. This level of support can be particularly valuable for smaller practices or those with limited resources, as it can help to alleviate the burden of managing and maintaining medical equipment.

Overall,  Auxo Medical’s equipment sales consultation and support are critical components of the healthcare industry. We provide healthcare providers with the guidance and resources necessary to make informed decisions about their medical equipment needs, saving time and money while improving patient outcomes. Whether you are a small clinic or a large hospital, working with a medical equipment sales consultant through Auxo Medical can help to ensure that your practice stays up-to-date and informed for your patients’ and facility’s best outcome.

Everyone can use some help, and we are always there for you.

Outfitting a medical office can be a taxing endeavor. Purchasing each piece of medical equipment from a different vendor is not only time consuming, but is typically more expensive. But you can simplify the process and save your budget with Auxo Medical.

We can provide and service the majority of your medical equipment needs at a fraction of the standard OEM cost. We offer a wide variety of popular manufacturers and models in order to give you the financial flexibility and performance you desire.

Dedicated to Customer Support

Every piece of medical equipment operates differently. If you are unsure about how to use a piece of equipment or are unsure about how it is behaving, Auxo Medical can help. Our service technicians can train you and your staff on the use of any of our products, including sterilizers, washers and OR tables, and are pleased to answer any questions that arise afterward.

A Large Inventory of Medical Equipment and Expert Guidance

When it comes to medical equipment, Auxo Medical has over 1100 medical equipment products available to view, purchase or request a quote online. Additionally, having expert guidance, support and maintenance is equally important. Having access to knowledgeable professionals who can advise on the best equipment for specific medical needs and provide training on how to use them safely and effectively is essential for the success and safety of any healthcare facility. Contact an Auxo Medical sales and support consultant today.

Olympus Endoscopy Scope Towers: An In-Depth Look at a World-Class Medical Solution

August 9, 2023
, , , , Articles

Olympus Endoscopy Scope TowersOlympus is a multinational corporation known for its high-quality cameras, optics, and medical equipment. Among its vast range of products, the Olympus Endoscopy Scope Towers stand out as a state-of-the-art solution for healthcare professionals. As a leading brand in endoscopic technology, Olympus provides a comprehensive endoscope management system that meets the needs of numerous medical specialties.

In this article, we will explore the features and components of Olympus Endoscopy Scope Towers. We will also discuss the advantages of using these towers in medical procedures and highlight the company’s commitment to patient safety, optimization, and technological innovation.

Components of Olympus Endoscopy Scope Towers

The Olympus Endoscopy Scope Tower is an advanced and modular endoscopic system that encompasses different components designed to work seamlessly together for optimal performance. These components include:

1. Video Processor

The video processor is the central hub for image processing, management, and display in the Olympus Endoscopy Scope Tower. It provides exceptional image quality, high-resolution images, and supports various advanced imaging techniques, such as Narrow Band Imaging (NBI) and Dual Focus.

2. Light Source

Olympus offers a range of high-quality light sources that provide superior illumination for endoscopy procedures. These powerful light sources work in tandem with the video processor to deliver high-resolution images with vivid colors and sharp details.

3. Endoscope

Olympus Endoscopes are known for their exceptional image quality, ergonomic design, and durability. Available in both flexible and rigid configurations, these endoscopes cater to a wide range of endoscopic procedures in various medical specialties, such as gastroenterology, urology, gynecology, and more.

4. Monitor

High-resolution monitors play a crucial role in displaying the live feed from the endoscope during an endoscopic procedure. Olympus provides medical-grade monitors that support various display modes and are compatible with advanced imaging techniques like NBI. These monitors are designed for optimal image quality, user comfort, and diagnostic accuracy.

5. Endoscope Reprocessor

An integral aspect of the Olympus Endoscopy Scope Tower is the automated endoscope reprocessor, which ensures the proper cleaning, disinfection, and sterilization of endoscopes between procedures. This critical component helps maintain patient safety and prevent cross-contamination by ensuring that endoscopes are consistently cleaned and disinfected according to established guidelines.

6. Trolley and Air-Water Sufflator

The compact trolley functions as a central workstation for performing and managing endoscopy procedures, while the air-water sufflator plays a key role in supplying air and water to the endoscope for optimal functioning.

Advantages of Olympus Endoscopy Scope Towers

Olympus Endoscopy Scope Towers offer numerous benefits to healthcare professionals and their patients in various clinical settings:

1. Superior Imaging Quality

One of the most significant advantages of Olympus Endoscopy Scope Towers is their unmatched imaging quality. Olympus’ continuous investment in research and development has enabled them to develop advanced imaging techniques like NBI, which enhances the visibility of mucosal and vascular patterns, aiding in the early detection of various diseases such as cancers.

2. Ergonomics and Ease of Use

Olympus has designed its endoscopic systems with the comfort of healthcare professionals in mind. Their endoscopes feature advanced ergonomic designs, allowing for greater comfort during long procedures and reduced hand fatigue. Additionally, the easy-to-navigate controls and user-friendly interface simplify the operation of the endoscopy system and ensure smooth workflow during procedures.

3. Modular and Customizable

Every medical specialty and clinical setting may have unique requirements when it comes to endoscopy systems. Olympus Endoscopy Scope Towers are modular, allowing individual components to be easily added or removed as needed. This makes the system highly adaptable and scalable, ensuring that it meets the specific needs of various medical practices.

4. Commitment to Patient Safety

Ensuring patient safety is paramount in healthcare, and Olympus is committed to providing endoscopy solutions that are safe and reliable. Their automated endoscope reprocessors adhere to strict guidelines, ensuring that endoscopes are properly cleaned and disinfected after every use. Additionally, Olympus invests in rigorous quality control and customer support to ensure the optimal performance of their endoscopy systems.

5. Technological Advancements

Olympus is continuously developing new technologies that improve the performance and outcomes of endoscopic procedures. Innovations such as NBI and Dual Focus have significantly improved the diagnostic capabilities of endoscopes and offer physicians better tools for detecting and treating various conditions.

Olympus’ Commitment to Innovation, Quality, and Support

Olympus values innovation and quality in its endoscopic solutions and stands firmly behind its commitment to creating state-of-the-art technology to enhance patient outcomes and medical professionals’ experience. Its dedication to research and development allows Olympus to maintain its status as a leader in the endoscopy field, bringing new, groundbreaking technologies to the market.

The company also prioritizes exceptional customer service and support to ensure that its endoscopy systems function optimally and healthcare professionals can adequately address their patients’ needs. This support consists of expert consultations, training, and reliable maintenance services to guarantee that Olympus Endoscopy Scope Towers continue to operate at peak performance.

Applications of Olympus Endoscopy Scope Towers in Different Medical Specialties

Olympus Endoscopy Scope Towers cater to various medical specialties through its range of endoscopes designed explicitly for different procedures and clinical settings. Some of the primary applications of these towers include:

1. Gastroenterology

Olympus provides a comprehensive range of endoscopes and endoscopic devices specifically designed for gastrointestinal procedures such as gastroscopy, colonoscopy, and endoscopic retrograde cholangiopancreatography (ERCP). These endoscopes offer advanced imaging technologies, such as NBI and Dual Focus, aiding in the detection and treatment of gastrointestinal diseases.

2. Urology

Olympus Endoscopy Towers are also highly suited for urological applications. A variety of endoscopes are available, catering to procedures like cystoscopy, ureteroscopy, and nephroscopy. These devices provide excellent visualization and precise control for urologists, allowing for accurate diagnosis and treatment of urologic conditions.

3. Gynecology

Endoscopy has become an indispensable diagnostic and surgical tool in gynecology, with Olympus offering a range of endoscopes specifically designed for gynecological procedures. Hysteroscopes, laparoscopes, and colposcopes are among the devices available, ensuring that gynecologists have access to the necessary technology for effective diagnosis and treatment of various gynecological conditions.

4. Pulmonology

In the field of pulmonology, Olympus delivers bronchoscopes and related devices tailored for procedures such as bronchoscopy and endobronchial ultrasound (EBUS). These tools provide pulmonologists with superior imaging capabilities and precise control during bronchoscopy procedures, enhancing diagnostic accuracy and therapeutic intervention outcomes.

5. Ear, Nose, and Throat (ENT)

Olympus Endoscopy Scope Towers also cater to the needs of otolaryngologists (ENT specialists) with a range of endoscopes designed specifically for procedures involving the ear, nose, throat, and related structures. This equipment enables ENT specialists to perform a wide variety of diagnostic and therapeutic procedures with optimal precision and image quality.

Purchase Olympus Endoscopy Scope Towers from Auxo Medical

If you are in need of Olympus Endoscopy Scope Towers, look no further than Auxo Medical. At Auxo Medical, we specialize in providing high-quality medical equipment to healthcare professionals. Our Olympus Endoscopy Scope Towers are known for their exceptional performance and durability, making them the perfect choice for any medical facility. Whether you are looking to upgrade your current equipment or are starting a new practice, we have a range of options to suit your needs. With our commitment to customer satisfaction and competitive pricing, Auxo Medical is the trusted choice for purchasing Olympus Endoscopy Scope Towers. View our catalogue of flexible and rigid scopes and scope towers online or contact us now for a customized quote.

Auxo Medical - High Quality Reliable New and Refurbished Medical Equipment Maintenance and Repair

Auxo Medical: New and Refurbished Medical Equipment

August 7, 2023
, , , , Articles

Top-Quality New and Refurbished Medical Equipment

Auxo Medical provides top-quality new and refurbished medical equipment to healthcare facilities, labs and so much more. In addition to providing medical equipment we also provide maintenance and repair services in many different regions throughout the US. With our wide range of products, knowledge, skills, experience and commitment to excellence, we are a trusted name in the medical equipment industry.

Advantages of Auxo Medical

One of the key advantages of Auxo Medical is our extensive selection of both new and refurbished equipment. This allows healthcare facilities to choose the option that best fits their needs and budget. New equipment offers the latest technological advancements and is perfect for those looking to stay at the forefront of medical innovation. On the other hand, refurbished equipment provides a cost-effective solution without compromising on quality. Auxo Medical ensures that their refurbished equipment undergoes a rigorous refurbishment process, ensuring that it meets industry standards and performs just as well as new equipment.

Auxo Medical understands the importance of reliable equipment in providing optimal patient care. That’s why we source our products from reputable manufacturers such as Steris, GE Healthcare, Philips, Mindray, Tuttnauer, Midmark, Stryker, Hill Rom among many others and perform thorough testing to ensure that each piece of equipment meets manufacturer and industry standards. Whether it’s surgical instruments, patient monitors, imaging systems, or any other medical equipment, Auxo Medical has a solution to meet every need.

Preventive Maintenance and Repair Services

In addition to our impressive range of products, Auxo Medical also offers exceptional maintenance and repair services. At Auxo Medical, we pride ourselves not only on our diverse selection of high-quality medical products but also on our exceptional maintenance and repair services. We understand that keeping medical equipment in optimal condition is crucial for providing efficient healthcare services. That’s why we have a team of skilled technicians who are experienced in servicing a wide range of medical equipment. Whether it’s routine maintenance, troubleshooting, or complex repairs, our technicians are dedicated to ensuring that your equipment is functioning at its best. We offer timely and reliable service to minimize downtime and keep your healthcare operations running smoothly. Trust Auxo Medical for all your maintenance and repair needs.

Financing Available

Auxo Medical understands the financial challenges faced by healthcare facilities and aims to provide solutions that alleviate these constraints. With a commitment to offering competitive pricing, Auxo Medical ensures that healthcare facilities can access high-quality medical equipment and supplies without breaking the bank. Additionally, Auxo Medical offers flexible financing options, allowing healthcare facilities to choose payment plans that suit their budgetary needs. By prioritizing affordability and flexibility, Auxo Medical enables healthcare facilities to provide the best care possible while staying within their financial means.

Wise Environmental Practices: A Core Value

Furthermore, Auxo Medical is dedicated to sustainability and reducing waste in the healthcare industry. As a core value of the company we are committed to wise environmental practices. We actively participate in recycling programs, reuse and reduce our waste wherever and whenever we can and encourage our customers to consider refurbished equipment as an eco-friendly alternative. By choosing refurbished equipment, healthcare facilities can not only save money but also contribute to a greener future.

Contact Auxo Medical Today for New & Refurbished Medical Equipment as well as Maintenance & Repair

If you are in need of new or refurbished medical equipment or in need of maintenance and repair services, look no further than Auxo Medical. With a commitment to providing top-quality products and services, Auxo Medical is a trusted provider in the healthcare industry. Whether you are a hospital, clinic, lab or private practice, we offer a wide range of medical and laboratory equipment options to meet your needs. Contact Auxo Medical today for all your medical equipment needs.

OR and Surgical Equipment - Auxo Medical

Auxo Medical Provides Medical Equipment Valuation and Liquidation Services

August 4, 2023
, , , Articles

Medical equipment is essential to ensure proper treatment and save lives. However, due to several factors including equipment upgrades, moving to a new facility with larger or smaller space, retirement or business closure, the need for disposal of currently held medical equipment. This leads to the need for medical equipment liquidation services. Auxo Medical offers medical equipment valuation and liquidation services to healthcare facilities and laboratories looking to find a financial and environmental beneficial way to offload their unneeded medical equipment.

Auxo Medical Provides Medical Equipment Valuation and Liquidation Services:

Auxo Medical is a leading name in the medical equipment industry and has more than 20 years of experience in the field. We offer a wide range of services to healthcare facilities and labs looking to properly liquidate their medical equipment. The first step in the process is to have the equipment valued. Auxo Medical professionals are experts in determining the market value of medical equipment, which ensures that the healthcare facility receives a fair price for their equipment.

Valuation Process:

The valuation process involves a thorough inspection of the equipment to determine its condition, functionality, and market demand. Whether your facility is liquidating, upgrading, or just needs an accounting of medical equipment for insurance purposes, knowing the value of your equipment is critical. Once valuated,  if the need is to liquidate, we will we move on to the liquidation process for the best possible solution of disposal of the equipment.

Liquidation Process:

Once the healthcare facility has agreed to the valuation and decided on a course of action, Auxo Medical will proceed with the liquidation process. This involves the efficient removal of the equipment from the facility and transportation to a secure location. Auxo Medical ensures that each transaction is handled with professionalism and with the most fair price possible.

Contact Auxo Medical for your Medical or Lab Equipment Valuation and Liquidation

Auxo Medical provides a valuable service to healthcare facilities and labs looking to properly dispose of their unneeded medical equipment. Through expert valuation and efficient liquidation, Auxo Medical ensures a fair value is received for the equipment and that the process is handled in a professional and secure manner. When it comes to medical equipment liquidation, Auxo Medical is a name that healthcare facilities can trust. Contact us today to discuss your equipment valuation or liquidation.

OR Equipment - Auxo Medical

Scope Towers and their Components: Key Equipment for Surgical Procedures

August 2, 2023
, , , , , , , Articles

Scope Towers

Stryker Tower AssemblyScope towers are used in various medical procedures, such as endoscopy, laparoscopy, and arthroscopy. These towers provide medical professionals with a comprehensive solution that enables them to achieve optimal visualization during surgeries. Medical scope towers are equipped with high-resolution displays, light sources, and cameras that provide high-quality images to doctors and surgeons. These towers also have the capability to record and store images and videos, which can be used for diagnostic and educational purposes. With the use of medical scope towers, medical professionals can perform procedures with greater accuracy and precision, resulting in better patient outcomes.

Surgical Cameras and Consoles

Stryker 1488 Camera ConsoleStryker 1488 HD 3-Chip camera systemSurgical cameras and consoles have revolutionized the field of medicine by allowing surgeons to perform complex procedures with greater accuracy and precision. These cameras provide high-definition images of the surgical site, allowing the surgeon to see fine details that would be otherwise difficult to discern. The consoles, on the other hand, allow the surgeon to control the camera and adjust the image to get the best view possible. By improving visualization during surgery, surgical cameras and consoles have reduced the risk of complications, shortened recovery times, and improved patient outcomes. They are now considered a standard tool in most surgical procedures, and their use is only expected to grow as technology continues to advance.

Surgical Video Processors

Stryker SDC Image CaptureSurgical video processors are essential tools in modern surgery. They are used to process and display high-quality images captured by surgical cameras during procedures, allowing surgeons and medical staff to see the surgical site in detail. These advanced processors can enhance and improve the images, making it easier for surgeons to make accurate diagnoses and perform complex procedures. They can also integrate with other medical equipment, such as endoscopes and microscopes, to provide a complete picture of the surgery. The use of surgical video processors are key components in the field of surgery, providing doctors with the tools they need to perform procedures with precision and accuracy.

Scope Tower Light Sources

Stryker L9000 LED Light SourceScope tower light sources are crucial components of modern surgical rooms. These light sources provide surgeons with optimal visibility during procedures, allowing them to perform intricate procedures with greater precision and accuracy. The latest surgical scope tower light sources are designed to provide bright, reliable illumination, and are equipped with features like adjustable brightness, color temperature, and focus to ensure that the surgeon has the best possible view of the surgical site.

Insufflation and Suction-Irrigation

Stryker 45 Liter Pneumosure XL InsufflatorInsufflation and suction-irrigation are two critical technologies that have transformed minimally invasive surgeries. Insufflation, which involves introducing gas into the body cavity, enables surgeons to access internal organs without making large incisions. Suction-irrigation is another essential technology that allows surgeons to remove fluids and debris from the surgical site while irrigating it with a sterile solution. The combination of these two technologies has several benefits, including improved surgical visualization and efficiency. Excess fluids are removed, enhancing visibility, while constant pressure within the body cavity facilitates greater accuracy and control in navigating through the tissue. Suction-irrigation also reduces the time required for instrument cleaning and drying, leading to quicker surgery times with fewer complications.

Scopes

Scopes are another vital tool for non-invasive diagnostic procedures. These specialized instruments enable healthcare professionals to visualize internal organs or body cavities without resorting to invasive procedures. Endoscopes, bronchoscopes, and colonoscopes are among the various types of scopes used for different purposes.

Stryker 502-859-030 Laparoscope 10mm 30 Degree Ideal Eyes HDRigid scopes, often used in arthroscopy, consist of a long, slender tube with a light source and camera at one end, allowing surgeons to visualize and access the interior of joints with precision. Arthroscopy is a procedure commonly performed to diagnose and treat various joint conditions, such as torn ligaments, cartilage damage, or joint inflammation. By inserting the rigid scope through small incisions, surgeons can examine the joint in detail without the need for open surgery.

One of the significant advantages of rigid scopes is their ability to provide high-resolution images, enabling surgeons to identify even the smallest abnormalities within the joint. The camera attached to the scope captures real-time video footage, which is displayed on a monitor, allowing the entire surgical team to visualize the procedure and collaborate effectively.

The use of scopes has significantly revolutionized diagnostic procedures, allowing doctors to identify medical conditions without resorting to invasive surgery. With advanced technology, doctors can closely examine organs or tissues in real-time, ensuring more accurate diagnoses. Non-invasive procedures also minimize the risk of bleeding, infection, and scarring associated with traditional surgical approaches.

The Importance of Biomedical Equipment Maintenance

Biomedical equipment maintenance is crucial for ensuring the proper functioning of medical equipment in healthcare facilities. This includes the proper maintenance of scope towers and all the components and related equipment associated with the towers.  Regular maintenance helps to identify and rectify any issues before they become major problems. It also ensures that the equipment remains in compliance with regulatory standards and extends its lifespan, ultimately saving costs for the healthcare facility. Biomedical equipment maintenance is a key component of patient safety and healthcare quality, and it should be prioritized by healthcare organizations to ensure the best possible outcomes for patients.

Trust Auxo Medical as your Biomedical Equipment Maintenance and Repair Provider

When it comes to the maintenance and repair of biomedical equipment, it’s crucial to have a reliable and trustworthy provider. That’s where Auxo Medical comes in. With decades of experience, the team at Auxo Medical is committed to ensuring that your equipment is maintained and repaired to the highest standards. We offer a comprehensive range of services, including preventative maintenance, emergency repairs, and equipment inspection and calibration. With a focus on customer satisfaction, Auxo Medical is committed to delivering exceptional results and building long-lasting relationships with their clients. So if you’re looking for a biomedical equipment maintenance and repair provider that you can trust, look no further than Auxo Medical.

Contact Auxo Medical for Scope Towers and all your Biomedical Equipment Needs

If you are in need of high-quality biomedical equipment, look no further than Auxo Medical. We are a trusted provider of top-of-the-line medical equipment, including Scope Towers and all the key components associated. Whether your are looking for brand new or refurbished biomedical equipment, the available products through Auxo Medical are designed to meet the needs of healthcare professionals and patients alike, ensuring that you receive the very best in medical care. At Auxo Medical, we pride ourselves on our commitment to delivering exceptional customer service, and  work closely with our clients to provide customized solutions that meet their unique needs. So whether you are looking for Scope Towers, Scopes, Insufflation and Suction-Irrigation equipment or other biomedical equipment, contact Auxo Medical today to receive a customized quote.

 

Auxo Medical - High Quality Reliable New and Refurbished Medical Equipment Maintenance and Repair

What is Auxo Medical?

July 31, 2023
, , , , , , Articles

Are you in the market for medical equipment? Do you need reliable and affordable solutions for your biomedical equipment needs? Look no further than Auxo Medical, the leading provider of wew and refurbished medical equipment.

At Auxo Medical, we understand the importance of providing high-quality medical equipment to healthcare facilities. We aim to bridge the gap between quality and affordability by offering fully refurbished and tested equipment that meet or exceed OEM standards. With thousands of satisfied customers across the country, we are confident that we can provide you with the same level of satisfaction in meeting your biomedical equipment needs.

Why You Need to Know About Auxo Medical

If you are in the healthcare industry, then you know how vital it is to have access to reliable medical equipment. Whether you work in a hospital, clinic, or long-term care facility, having equipment that is safe, efficient and effective is both beneficial to your patients as well as your staff . This is where Auxo Medical comes in. As a leading provider of new and refurbished biomedical equipment, we offer high-quality products and services that are tailored to meet the unique needs of healthcare providers across the country.

By partnering with Auxo Medical, healthcare providers can streamline their operations while ensuring that their patients receive the best possible care. With a wide range of products and services that are designed to meet every need and budget, Auxo Medical has established itself as an essential player in the healthcare industry. From providing sterilization equipment such as autoclaves, washer disinfectors and high capacity sterilizers, to maintaining anesthesia machines, we are dedicated to helping healthcare providers stay up-to-date with the latest technology without breaking the bank.

Auxo Medical: The Leading Provider of Refurbished Medical Equipment

If you are in the market for high-quality refurbished medical equipment, Auxo Medical has you covered. As the leading provider of biomedical equipment, Auxo Medical has a reputation for providing top-notch products and services to healthcare facilities across the United States.

At Auxo Medical, we believe that every healthcare facility should have access to reliable and cost-effective equipment. That’s why we specialize in refurbishing pre-owned medical devices to like-new condition. Our team of expert technicians thoroughly inspects, repairs, rebuilds and tests each piece of equipment to ensure that it meets or exceeds OEM specifications.

The Benefits of Choosing Auxo Medical for Biomedical Equipment

One of the primary benefits of choosing Auxo Medical for your biomedical equipment needs is our commitment to quality and customer satisfaction. With nearly 30 years in the industry, Auxo Medical has established itself as a trusted provider of refurbished medical equipment. All equipment is thoroughly tested and inspected before being sold, ensuring that it meets the highest standards of safety and functionality.

Another key benefit of working with Auxo Medical is our extensive inventory of biomedical equipment options. From patient monitors to ECG machines all the way to surgical tables and OR lighting we have a wide variety of products available to meet your specific needs. Additionally, Auxo Medical offers installation and maintenance services so you know your equipment will be up and running properly for your practice or facility.

Sterilization Equipment: What You Need to Know About Auxo Medical

Sterilization equipment is a vital part of any healthcare facility, and faulty equipment can potentially lead to devastating consequences. That’s why it’s essential to work with a reliable provider like Auxo Medical. Auxo Medical offers various sterilization equipment, including autoclaves, sterilizers, and washer-disinfectors. Our wide range of options means that you can find the perfect solution for your facility’s specific needs.

Not only does Auxo Medical offer top-quality products, but we also provide exceptional after purchase maintenance and support. Our team understands that purchasing new sterilization equipment may not always be feasible for every budget. That’s why we also offer refurbished options that are just as reliable as brand-new machines but at a fraction of the cost.

Anesthesia Equipment: How Auxo Medical is Making a Difference

When it comes to providing safe and effective anesthesia, having reliable and high-quality equipment is crucial. This is where Auxo Medical comes in, offering a range of new and refurbished anesthesia equipment that meets the highest standards of quality and safety.

One way Auxo Medical is making a difference in the field of anesthesia is by offering comprehensive preventive maintenance plans for anesthesia and biomedical equipment. This ensures that all equipment stays in top condition, reducing the risk of malfunctions and ensuring that procedures can be performed smoothly and without interruption. Additionally, if any issues do arise, we also offer emergency repair services to quickly address any problems and get your facility back up and running as quickly as possible.

Maintaining Your Medical Equipment: The Importance of Preventive Maintenance

When it comes to biomedical equipment, regular maintenance is a critical aspect of ensuring optimal performance and longevity. Neglecting preventive maintenance can result in costly repairs and even potential safety hazards for patients and medical personnel. Fortunately, Auxo Medical offers comprehensive preventive maintenance services to ensure your equipment remains in top condition.

Preventive maintenance involves regular inspections, cleaning, and testing of equipment to identify potential issues before they become major problems. Auxo Medical’s team of highly trained technicians utilizes state-of-the-art diagnostic tools to detect any defects or malfunctions that may arise. By addressing minor issues before they escalate, you’ll save money on repairs in the long run while ensuring the safety and well-being of everyone who relies on your equipment.

Creating a PM Plan with Auxo Medical

Preventive maintenance is crucial to the longevity and performance of medical equipment. That’s why Auxo Medical provides customized PM plans to meet the unique needs of each facility and their equipment. Our team of professionals will work with you to develop a comprehensive plan that includes routine inspections, testing, and calibration.

With a PM plan in place, you can expect improved safety, reliability, and efficiency from your biomedical equipment. Plus, regular maintenance can help prevent costly breakdowns and repairs that could disrupt patient care or impact your bottom line. Trust in Auxo Medical to keep your medical equipment running smoothly.

What to Expect from Emergency Repair Services at Auxo Medical

In the world of medical equipment, emergencies can happen at any time. That’s why it’s essential to partner with a company that offers 24/7 emergency repair services like what Auxo Medical provides. Our team of skilled technicians is always on standby, ready to provide prompt and effective repairs when you need them the most.

When an emergency arises, you can count on Auxo Medical to respond immediately. Its team will evaluate your situation and deploy the necessary resources to fix your equipment quickly. Whether you’re dealing with a broken ventilator or a malfunctioning anesthesia machine, we have the expertise and tools needed to get you back up and running again in no time.

Choose Auxo Medical as your All-In-One Medical Equipment Solution

Auxo Medical is a trusted provider of refurbished medical equipment with a reputation for quality, expertise, and reliability. Whether you’re looking for sterilization or anesthesia equipment, or simply need help maintaining your existing equipment, Auxo Medical has the resources and knowledge necessary to meet your needs. With our focus on providing high quality, reliable and affordable medical equipment as well as properly maintaining that equipment, we are truly committed to providing the best all-in-one medical equipment solutions in the industry. Choose Auxo Medical as your partner in medical equipment and rest assured that you’re getting the best service available in the industry today. Contact Auxo Medical today for your complimentary medical equipment solution consultation.

Medical Equipment Financing

Finance Your Auxo Medical Equipment Purchase

July 28, 2023
, , , Articles

The Advantages of Buying New or Refurbished Medical Equipment from Auxo Medical

If you are looking to purchase medical equipment, one of the best options available is Auxo Medical. We offer new and refurbished medical equipment that is of the highest quality. There are many advantages to purchasing medical equipment from Auxo Medical.

One of the biggest advantages is that most of our equipment is backed by a warranty. This means that if anything goes wrong with your equipment, you can get it repaired or replaced. Another advantage is that we offer a wide variety of products so you can find everything you need in one place.

Additionally, purchasing refurbished equipment can save you money without sacrificing quality. Refurbished products have been restored to their original condition and often come with significant discounts compared to buying new. Auxo Medical also offers financing options through Ascentium Capital so you can get the equipment you need without breaking the bank.

Buying new or refurbished medical equipment from Auxo Medical offers many advantages including quality assurance, warranty coverage, product variety, and cost savings through financing options.

Finance Your Auxo Medical Equipment Purchase with Ascentium Capital available through Auxo Medical

If you want to finance your medical equipment purchase from Auxo Medical, you can take advantage of financing solutions offered by Ascentium Capital. This financing option is ideal for healthcare providers who need the latest medical equipment but do not have upfront capital to make a purchase.

Working in partnership with Auxo Medical, Ascentium Capital offers flexible financing options to suit your individual needs. You can benefit from affordable monthly payments, fast credit decisions, and up to 100% financing. Additionally, you will be able to preserve your cash flow and access the latest medical equipment that is essential for delivering the best care possible.

Ascentium Capital has a team of experienced finance specialists who can help you find a custom solution that meets your unique business needs. Their programs offer varied repayment terms, including seasonal payments or deferred payments at the beginning of the term. There also low or no upfront costs and there may be potential tax savings as well.

Financing through Ascentium Capital and Auxo Medical allows you to get state-of-the-art medical equipment that will improve patient outcomes at an affordable cost. It’s a smart investment in your business’ future while simultaneously providing high-quality care for patients in need.

Fast. Flexible. Financing.

1. Financing, leasing and working capital loans*
2. Application-only up to $250,000
3. Fast credit decisions
4. Simple one-page finance document

*Financing and instant decisions subject to credit parameters. Please contact your tax advisor regarding tax incentives. Neither Ascentium Capital nor Auxo Medical, LLC is the agent of the other. Ascentium not being the manufacturer, seller or distributor of the equipment, makes no representation  or warranty on the equipment. Loans made or arranged pursuant to a California Financing Law license.

Order your Medical Equipment through Auxo Medical

Ordering medical equipment can be a daunting task, but Auxo Medical is here to make the process smooth and hassle-free. We are committed to providing top-quality new and refurbished medical equipment. Whether you need diagnostic imaging equipment, anesthesia machines, or surgical tables, Auxo Medical has got you covered. We also take pride in our inventory of high-quality medical equipment from leading brands in the industry. View our online catalogue of over 1100 medical equipment products and parts or contact us today for a customized quote.

1 … 21 22 23 24 25 … 44