At Auxo Medical, we know autoclaves are the backbone of sterile processing in healthcare, laboratories, and dental practices. These critical devices ensure instruments and equipment are safe for patient care, research, and procedures. However, like any high-performance equipment, autoclaves require consistent care to operate reliably. Neglecting preventative maintenance can lead to costly downtime, failed sterilization cycles, and even compliance violations.

In this guide, we’ll explain why preventative autoclave maintenance is non-negotiable, share user-friendly maintenance tips, and outline when it’s time to call professionals like our team at Auxo Medical.

Why Preventative Autoclave Maintenance Matters

The Cost of Neglect

Autoclaves are complex systems that combine high-pressure steam, precise temperature control, and mechanical components. Without regular maintenance:

• Sterilization failures risk patient safety and regulatory non-compliance.
• Unexpected breakdowns disrupt workflows and delay procedures.
• Premature wear shortens the autoclave’s lifespan, leading to expensive replacements.

Studies show that facilities with proactive maintenance plans experience 50% fewer equipment failures and 30% longer equipment lifespans. At Auxo Medical, we’ve seen firsthand how consistent care prevents emergencies and protects your budget.

Compliance and Safety

Regulatory bodies like the CDC, FDA, Joint Commission and AAMI mandate strict sterilization protocols. Regular maintenance ensures your autoclave meets these standards, reducing liability and ensuring audit readiness.

Preventative Autoclave Maintenance You Can Perform

While professional servicing is essential, daily and weekly upkeep by your staff plays a vital role. Here are key tasks you can implement today:

Daily Maintenance Checks

1. Clean the Chamber and Door Gasket
   • Wipe the chamber interior with a non-abrasive cloth and distilled water to remove residue.
   • Inspect the door gasket (seal) for cracks, stiffness, or debris. A damaged gasket compromises pressure integrity.
2. Check for Leaks
   • Look for water pooling under the autoclave or steam escaping around the door. Minor leaks can escalate quickly.
3. Verify Cycle Parameters
   • Ensure temperature and pressure meet the settings for your load type (e.g., 121°C–135°C for most medical instruments).

Weekly Maintenance Tasks

1. Clean the Drain Strainer
   • Debris in the drain line can cause blockages and pressure issues. Remove and rinse the strainer to prevent backups.
2. Inspect Valves and Sensors
   • Check safety valves, steam traps, and pressure release mechanisms for visible damage or corrosion.
3. Run a Bowie-Dick Test
   • If your autoclave is a pre-vacuum model, weekly Bowie-Dick tests verify air removal efficiency.

Monthly Deep Cleaning

• Descale the Boiler
  • Mineral buildup from hard water reduces heating efficiency. Use manufacturer-approved descaling agents.
• Lubricate Door Hinges
  • Apply heat-resistant lubricant to hinges to ensure smooth operation and prevent rust.

When to Call a Professional: Signs You Need Expert Help

Even with diligent in-house care, some issues require certified technicians. Here’s when to contact Auxo Medical:

1. Persistent Error Codes or Alarms

Modern autoclaves display error codes for issues like overheating, low water levels, or sensor malfunctions. If resetting the system doesn’t resolve the problem, our team can diagnose and repair electronic or mechanical faults.

2. Inconsistent Sterilization Results

Failed biological indicators or wet packs (moisture in sterilized items) signal deeper issues, such as:

• Malfunctioning vacuum pumps
• Faulty temperature sensors
• Steam quality problems

3. Major Leaks or Pressure Loss

If your autoclave struggles to reach pressure or leaks steam/water during cycles, the culprit could be a damaged gasket, faulty solenoid valve, or boiler issue. These repairs demand specialized tools and expertise.

4. Annual Certification and Validation

Regulatory compliance requires annual performance testing, including:

• Temperature Mapping ensures even heat distribution.
• Leak Rate Testing checks vacuum efficiency in pre-vacuum models.
• Calibration of pressure gauges and sensors.

Our technicians provide thorough validation services to keep your autoclave compliant and audit-ready.

5. Replacement of Critical Components

Wear-prone parts like heating elements, door seals, and steam generators need periodic replacement. We use OEM (original equipment manufacturer) parts to ensure compatibility and longevity.

The Importance of Professional Preventative Maintenance

While user maintenance is crucial, partnering with professionals like Auxo Medical offers unmatched benefits:

1. Prevent Costly Downtime

Our certified technicians identify and resolve minor issues before they escalate. For example, replacing a worn gasket during a routine visit prevents a mid-cycle failure during a busy surgery day.

2. Extend Equipment Lifespan

Proactive component replacements and calibration reduce strain on your autoclave. Facilities with professional maintenance plans often see their devices last 5–10 years longer than neglected units.

3. Ensure Compliance and Documentation

We provide detailed service reports, including replaced parts, test results, and compliance certifications. This documentation is critical for audits and accreditation.

4. Access to Advanced Tools and Training

Our team uses manufacturer-approved diagnostic tools and stays updated on the latest autoclave technologies. Whether you use a Midmark, Tuttnauer, or Pelton & Crane autoclave, we deliver precision repairs.

5. Tailored Maintenance Plans

Every facility has unique needs. We offer flexible plans, including quarterly, biannual, or annual service visits, to match your workflow and budget.

Why Choose Auxo Medical for Your Autoclave Maintenance?

At Auxo Medical, we’re more than a service provider—we’re your sterilization partner. Here’s what sets us apart:

1. Nationwide Expertise, Local Service

With teams across the U.S. from Virginia to Florida and Ohio, we provide fast, reliable support no matter your location.

2. Certified Technicians

Our technicians are factory-trained and certified to work on all major autoclave brands, including Steris, Getinge, and Castle.

3. Competitive and Flexible Pricing

We offer PM plans and repairs at 30-40% below OEM pricing. Choose from time-and-materials billing or cost-saving Preventative Maintenance Agreements.

4. Emergency Repairs

If your autoclave fails unexpectedly, our 24/7 emergency service minimizes downtime and gets you back online fast.

5. Refurbished Equipment Options

For older autoclaves nearing end-of-life, we provide high-quality refurbished models pre-inspected and backed by warranties.

Don’t Wait for a Breakdown—Schedule Preventative Care Today

Preventative autoclave maintenance isn’t optional—it’s essential for patient safety, compliance, and operational efficiency. At Auxo Medical, we make it easy to protect your investment with expert care tailored to your needs.

Ready to Get Started?
View our available field service areas online or contact our office now by calling (888) 728-8448 or fill out the service quote request form below. 

Service Quote / Repair Request

* Please note:  Auxo Medical does not provide services for personal equipment.

First Name *

Last Name *

Email *

Company/Facility Name *

Zip Code *

Phone Number *

Message *

If you would like an estimate on a preventative maintenance plan, please upload your equipment list here.

Drop a file here or click to upload Choose File

Maximum file size: 516MB

CAPTCHA

If you are human, leave this field blank.

Δ